Sheet 1
OrthographicThis sheet includes 39 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 39 geometry edges from the CAD projection pipeline.
This sheet includes 80 geometry edges from the CAD projection pipeline.
This sheet includes 72 geometry edges from the CAD projection pipeline.
This sheet includes 89 geometry edges from the CAD projection pipeline.
This sheet includes 39 geometry edges from the CAD projection pipeline.
This sheet includes 36 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the central bore and coupling to show precise dimensions and fit requirements.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Pressure Vessel Assembly with Internal Mechanism
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 2.0 | standard_view |
| 2 | Assembly - Top View | 2.0 | standard_view |
| 3 | Assembly - Left View | 2.0 | standard_view |
| 4 | Assembly - Isometric View | 2.0 | standard_view |
| 5 | Section A-A | 2.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.15 | A | B | C | low | bolt/hole pattern × 6 (position) |
| profile_of_a_surface | 0.2 | A | B | C | medium | 412 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 1 | — | value drifted: asked 100, measured 86.6025 | ||
| 7 | — | value drifted: asked 20, measured 19.47 |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.1 | high | ||
| perpendicularity | 0.2 | A | high | |
| position | 0.15 | diameter | A | B | C | low |
| cylindricity | 0.2 | high | ||
| profile_of_a_surface | 0.2 | A | B | C | medium |
All 25 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceY | 120.0 | overall height 120.0mm |
| 2 | 1 | Diameter | 6.0 | 3x Ø6.0mm |
| 3 | 1 | DistanceX | 86.6 | hole pattern width 86.6mm (3 x Ø6, from model) |
| 4 | 1 | DistanceY | 75.0 | hole pattern height 75.0mm (3 x Ø6, from model) |
| 5 | 2 | DistanceX | 120.0 | overall width 120.0mm |
| 6 | 2 | DistanceY | 280.0 | overall height 280.0mm |
| 7 | 2 | Radius | 43.8 | 2x R43.8mm |
| 8 | 2 | DistanceY | 270.0 | height 270.0mm at x≈-4.2mm [unverified span] |
| 9 | 2 | DistanceY | 251.2 | height 251.2mm at x≈-58.800000000000004mm [unverified span] |
| 10 | 2 | DistanceY | 248.6 | height 248.6mm at x≈-46.2mm [unverified span] |
| 11 | 3 | DistanceY | 120.0 | overall height 120.0mm |
| 12 | 3 | DistanceX | 250.0 | width 250.0mm at y≈-56.73778499999999mm [unverified span] |
| 13 | 3 | DistanceX | 244.0 | width 244.0mm at y≈-61.102229999999984mm [unverified span] |
| 14 | 5 | DistanceY | 120.0 | overall height 120.0mm |
| 15 | 5 | Radius | 3.0 | 12x R3.0mm |
| 16 | 5 | Radius | 5.0 | 2x R5.0mm |
| 17 | 5 | Radius | 38.8 | 2x R38.8mm |
| 18 | 5 | Radius | 43.8 | 4x R43.8mm |
| 19 | 5 | Angle | 84.9 | 2x angle 84.9 deg |
| 20 | 6 | Diameter | 5.8 | 2x Ø5.8mm |
| 21 | 6 | Diameter | 6.7 | 2x Ø6.7mm |
| 22 | 6 | Diameter | 7.5 | 2x Ø7.5mm |
| 23 | 7 | Diameter | 8.0 | 3x Ø8.0mm |
| 24 | 7 | Radius | 5.0 | 4x R5.0mm |
| 25 | 7 | Angle | 85.0 | 8x angle 85.0 deg |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
