Sheet 1
OrthographicThis sheet includes 101 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 101 geometry edges from the CAD projection pipeline.
This sheet includes 93 geometry edges from the CAD projection pipeline.
This sheet includes 91 geometry edges from the CAD projection pipeline.
This sheet includes 24 geometry edges from the CAD projection pipeline.
This sheet includes 101 geometry edges from the CAD projection pipeline.
This sheet includes 92 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the bolt hole pattern on the mounting bracket to show the precise spacing and diameter.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Hilux Transmission Undershield
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 0.25 | standard_view |
| 2 | Assembly - Top View | 0.5 | standard_view |
| 3 | Assembly - Left View | 0.25 | standard_view |
| 4 | Assembly - Isometric View | 0.25 | standard_view |
| 5 | Section A-A | 0.25 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 1.0 | A | B | C | medium | bolt/hole pattern × 8 (position) |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 6 | Radius | 3.2 | 16x R3.2mm | outside page band (tried 20 position(s)) |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.2 | high | ||
| perpendicularity | 0.2 | A | high | |
| position | 1.0 | diameter | A | B | C | medium |
All 31 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 1754.3 | overall width 1754.3mm |
| 2 | 1 | DistanceY | 1950.0 | overall height 1950.0mm |
| 3 | 1 | Radius | 5.2 | 16x R5.2mm |
| 4 | 1 | Radius | 105.0 | 2x R105.0mm |
| 5 | 1 | Radius | 136.8 | 4x R136.8mm |
| 6 | 1 | Angle | 8.5 | 8x angle 8.5 deg |
| 7 | 2 | DistanceX | 1753.4 | overall width 1753.4mm |
| 8 | 2 | DistanceY | 170.0 | overall height 170.0mm |
| 9 | 2 | Diameter | 8.1 | 4x Ø8.1mm |
| 10 | 2 | DistanceX | 90.0 | hole pitch 90.0mm (horizontal, Ø8.1) |
| 11 | 2 | Radius | 3.0 | 2x R3.0mm |
| 12 | 2 | Radius | 6.0 | 2x R6.0mm |
| 13 | 2 | Radius | 15.9 | 4x R15.9mm |
| 14 | 2 | Angle | 71.6 | 2x angle 71.6 deg |
| 15 | 2 | DistanceX | 1722.5 | hole pitch 1722.5mm (2 x Ø31.8, from model) |
| 16 | 3 | DistanceY | 1950.0 | overall height 1950.0mm |
| 17 | 3 | Diameter | 20.0 | 2x Ø20.0mm |
| 18 | 3 | DistanceY | 1600.0 | hole pitch 1600.0mm (vertical, Ø20) |
| 19 | 3 | Radius | 4.1 | 8x R4.1mm |
| 20 | 3 | Radius | 6.0 | 4x R6.0mm |
| 21 | 3 | Radius | 19.9 | R19.9mm |
| 22 | 3 | Radius | 20.0 | 4x R20.0mm |
| 23 | 5 | DistanceY | 1950.0 | overall height 1950.0mm |
| 24 | 5 | Diameter | 20.0 | 2x Ø20.0mm |
| 25 | 5 | DistanceY | 1600.0 | hole pitch 1600.0mm (vertical, Ø20) |
| 26 | 5 | Angle | 45.0 | 3x angle 45.0 deg |
| 27 | 5 | DistanceY | 1884.2 | height 1884.2mm at x≈29.25mm [unverified span] |
| 28 | 5 | DistanceY | 1121.6 | height 1121.6mm at x≈-29.25mm [unverified span] |
| 29 | 7 | Radius | 3.2 | 8x R3.2mm |
| 30 | 7 | Radius | 4.5 | 8x R4.5mm |
| 31 | 7 | Radius | 5.2 | 8x R5.2mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
