Sheet 1
OrthographicThis sheet includes 110 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 110 geometry edges from the CAD projection pipeline.
This sheet includes 117 geometry edges from the CAD projection pipeline.
This sheet includes 111 geometry edges from the CAD projection pipeline.
This sheet includes 103 geometry edges from the CAD projection pipeline.
This sheet includes 98 geometry edges from the CAD projection pipeline.
This sheet includes 102 geometry edges from the CAD projection pipeline.
Magnifies the inlet port and sealing area, highlighting the critical tolerance and surface finish required for air tightness.
Focuses on the internal bearing support and shaft alignment, essential for ensuring smooth rotation and mechanical stability.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Supercharger Compressor EATON TVS V400 (VW TSI 1.4)
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 1.0 | standard_view |
| 2 | Assembly - Top View | 1.0 | standard_view |
| 3 | Assembly - Left View | 1.0 | standard_view |
| 4 | Assembly - Isometric View | 0.5 | standard_view |
| 5 | Section A-A | 1.0 | section_view |
| 6 | Section B-B | 1.0 | section_view |
| 7 | Detail C | 2.0 | detail_view |
| 8 | Detail D | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| profile_of_a_surface | 0.4 | A | B | C | medium | 1039 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 1 | Distance | 40.5 | hole pitch 40.5mm (2 x Ø11, from model) | outside page band (tried 17 position(s)) |
| 1 | DistanceX | 246.8 | hole pitch 246.8mm (2 x Ø13, from model) | outside page band (tried 16 position(s)) |
| 1 | DistanceX | 859.5 | overall width 859.5mm | outside page band (tried 17 position(s)) |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| cylindricity | 0.2 | high | ||
| circular_runout | 0.2 | A | high | |
| circular_runout | 0.2 | A | high | |
| circular_runout | 0.2 | A | high | |
| circular_runout | 0.2 | A | high | |
| total_runout | 0.2 | A | high | |
| total_runout | 0.2 | A | high | |
| total_runout | 0.2 | A | high | |
| profile_of_a_surface | 0.4 | A | B | C | medium |
All 18 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | Angle | 75.3 | 4x angle 75.3 deg |
| 2 | 2 | DistanceX | 863.1 | overall width 863.1mm |
| 3 | 2 | DistanceY | 251.7 | overall height 251.7mm |
| 4 | 2 | Angle | 62.9 | 3x angle 62.9 deg |
| 5 | 2 | Angle | 68.9 | 5x angle 68.9 deg |
| 6 | 2 | DistanceX | 110.0 | hole pitch 110.0mm (2 x Ø10, from model) |
| 7 | 3 | DistanceX | 252.3 | overall width 252.3mm |
| 8 | 3 | DistanceY | 324.8 | overall height 324.8mm |
| 9 | 3 | Radius | 14.0 | 6x R14.0mm |
| 10 | 3 | Radius | 60.0 | 7x R60.0mm |
| 11 | 3 | Radius | 60.1 | R60.1mm |
| 12 | 3 | Angle | 71.0 | angle 71.0 deg |
| 13 | 3 | Angle | 60.0 | 7x angle 60.0 deg |
| 14 | 7 | Radius | 1.0 | 4x R1.0mm |
| 15 | 8 | Radius | 3.0 | 4x R3.0mm |
| 16 | 9 | Radius | 3.0 | 4x R3.0mm |
| 17 | 9 | Radius | 20.0 | 2x R20.0mm |
| 18 | 9 | Angle | 86.8 | angle 86.8 deg |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
