Sheet 1
OrthographicThis sheet includes 65 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 65 geometry edges from the CAD projection pipeline.
This sheet includes 85 geometry edges from the CAD projection pipeline.
This sheet includes 86 geometry edges from the CAD projection pipeline.
This sheet includes 82 geometry edges from the CAD projection pipeline.
This sheet includes 75 geometry edges from the CAD projection pipeline.
This sheet includes 75 geometry edges from the CAD projection pipeline.
Magnifies the central bore and surrounding bolt holes on the right-end flange, allowing for precise dimensioning of the mounting interface.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
1,5kW 18000 rpm Spindle Motor
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 2.0 | standard_view |
| 2 | Assembly - Left View | 5.0 | standard_view |
| 3 | Assembly - Right View | 5.0 | standard_view |
| 4 | Assembly - Isometric View | 2.0 | standard_view |
| 5 | Section A-A | 5.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| profile_of_a_surface | 0.2 | A | B | C | medium | 293 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 2 | Diameter | 7.0 | 7x Ø7.0mm | Diameter ref Edge228 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 6 | Diameter | 21.4 | Ø21.4mm | overlaps prior label (tried 20 position(s)) |
| 6 | Radius | 21.5 | 8x R21.5mm | overlaps prior label (tried 20 position(s)) |
| 2 | — | value drifted: asked 14, measured 10.5 | ||
| 2 | — | value drifted: asked 36.4, measured 18.1865 |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| cylindricity | 0.2 | high | ||
| circular_runout | 0.2 | A | high | |
| circular_runout | 0.2 | A | high | |
| circular_runout | 0.2 | A | high | |
| total_runout | 0.2 | A | high | |
| profile_of_a_surface | 0.2 | A | B | C | medium |
All 32 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 251.7 | overall width 251.7mm |
| 2 | 1 | DistanceY | 79.5 | overall height 79.5mm |
| 3 | 1 | DistanceX | 197.5 | width 197.5mm at y≈-37.754999999999995mm [unverified span] |
| 4 | 2 | Diameter | 8.0 | 5x Ø8.0mm |
| 5 | 2 | DistanceY | 36.4 | hole pitch 36.4mm (vertical, Ø6) |
| 6 | 2 | DistanceX | 70.0 | hole pattern width 70.0mm (4 x Ø8, from model) |
| 7 | 2 | DistanceY | 70.0 | hole pattern height 70.0mm (4 x Ø8, from model) |
| 8 | 2 | DistanceX | 66.0 | hole pattern width 66.0mm (4 x Ø6, from model) |
| 9 | 2 | DistanceY | 66.0 | hole pattern height 66.0mm (4 x Ø6, from model) |
| 10 | 2 | DistanceX | 31.5 | hole pattern width 31.5mm (3 x Ø7, from model) |
| 11 | 3 | DistanceY | 79.5 | overall height 79.5mm |
| 12 | 3 | Diameter | 6.0 | 4x Ø6.0mm |
| 13 | 3 | Diameter | 7.0 | 4x Ø7.0mm |
| 14 | 3 | Diameter | 7.1 | 4x Ø7.1mm |
| 15 | 3 | Distance | 66.0 | bolt circle Ø66.0mm (4 x Ø6 holes) |
| 16 | 3 | DistanceY | 66.0 | hole pattern height 66.0mm (4 x Ø6, from model) |
| 17 | 6 | Diameter | 22.0 | Ø22.0mm |
| 18 | 6 | Radius | 8.5 | R8.5mm |
| 19 | 6 | Radius | 8.7 | R8.7mm |
| 20 | 6 | Radius | 9.5 | 2x R9.5mm |
| 21 | 6 | Radius | 14.0 | 8x R14.0mm |
| 22 | 6 | Radius | 16.5 | 8x R16.5mm |
| 23 | 6 | Radius | 19.0 | 8x R19.0mm |
| 24 | 6 | Radius | 24.0 | 8x R24.0mm |
| 25 | 7 | Diameter | 6.7 | Ø6.7mm |
| 26 | 7 | Diameter | 14.0 | Ø14.0mm |
| 27 | 7 | Diameter | 15.0 | Ø15.0mm |
| 28 | 7 | DistanceX | 5.5 | hole pattern width 5.5mm (4 x Ø1, from model) |
| 29 | 8 | Diameter | 6.7 | Ø6.7mm |
| 30 | 8 | Diameter | 14.0 | Ø14.0mm |
| 31 | 8 | Diameter | 15.0 | Ø15.0mm |
| 32 | 8 | DistanceX | 5.5 | hole pattern width 5.5mm (4 x Ø1, from model) |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
