Sheet 1
OrthographicThis sheet includes 93 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 93 geometry edges from the CAD projection pipeline.
This sheet includes 106 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
This sheet includes 103 geometry edges from the CAD projection pipeline.
This sheet includes 88 geometry edges from the CAD projection pipeline.
This sheet includes 88 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the threaded holes and mounting bracket, highlighting critical fastening details.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
DC 12 V Submersible Motor Pump
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 2.0 | standard_view |
| 2 | Assembly - Top View | 2.0 | standard_view |
| 3 | Assembly - Left View | 2.0 | standard_view |
| 4 | Assembly - Isometric View | 2.0 | standard_view |
| 5 | Section A-A | 2.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| profile_of_a_surface | 0.4 | A | B | C | low | 462 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 1 | Diameter | 14.0 | 3x Ø14.0mm | Diameter ref Edge608 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 1 | Diameter | 17.7 | 3x Ø17.7mm | Diameter ref Edge609 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 6 | Radius | 0.9 | R0.9mm | outside page band (tried 20 position(s)) |
| 6 | Diameter | 4.5 | 2x Ø4.5mm | outside page band (tried 20 position(s)) |
| 6 | Radius | 10.7 | R10.7mm | outside page band (tried 20 position(s)) |
| 7 | Radius | 0.9 | R0.9mm | outside page band (tried 20 position(s)) |
| 7 | Diameter | 4.5 | 2x Ø4.5mm | outside page band (tried 20 position(s)) |
| 7 | Radius | 10.7 | R10.7mm | outside page band (tried 20 position(s)) |
| 7 | Radius | 11.1 | 2x R11.1mm | outside page band (tried 20 position(s)) |
| 7 | Angle | 77.9 | 2x angle 77.9 deg | outside page band (tried 9 position(s)) |
| 1 | — | value drifted: asked 69.2, measured 65.93 | ||
| 1 | — | value drifted: asked 86.3, measured 44.8685 |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.1 | high | ||
| cylindricity | 0.2 | high | ||
| circular_runout | 0.2 | B | high | |
| total_runout | 0.2 | B | high | |
| profile_of_a_surface | 0.4 | A | B | C | low |
All 27 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 155.7 | overall width 155.7mm |
| 2 | 1 | DistanceY | 193.6 | overall height 193.6mm |
| 3 | 1 | Distance | 92.0 | hole pitch 92.0mm (2 x Ø7, from model) |
| 4 | 1 | DistanceX | 131.2 | hole pattern width 131.2mm (6 x Ø10, from model) |
| 5 | 1 | DistanceY | 133.0 | hole pattern height 133.0mm (6 x Ø10, from model) |
| 6 | 2 | DistanceX | 155.7 | overall width 155.7mm |
| 7 | 2 | DistanceY | 262.5 | overall height 262.5mm |
| 8 | 2 | Radius | 1.5 | 62x R1.5mm |
| 9 | 2 | Radius | 3.6 | R3.6mm |
| 10 | 2 | Radius | 3.8 | R3.8mm |
| 11 | 2 | Angle | 49.1 | 2x angle 49.1 deg |
| 12 | 3 | DistanceX | 262.5 | overall width 262.5mm |
| 13 | 3 | DistanceY | 193.6 | overall height 193.6mm |
| 14 | 3 | Radius | 3.9 | R3.9mm |
| 15 | 3 | Radius | 13.9 | 2x R13.9mm |
| 16 | 3 | Angle | 47.19999999999999 | 3x angle 47.2 deg |
| 17 | 3 | Angle | 62.400000000000006 | angle 62.4 deg |
| 18 | 5 | DistanceX | 262.5 | overall width 262.5mm |
| 19 | 5 | DistanceY | 193.6 | overall height 193.6mm |
| 20 | 5 | Radius | 3.9 | R3.9mm |
| 21 | 5 | Radius | 6.0 | R6.0mm |
| 22 | 5 | Radius | 13.9 | R13.9mm |
| 23 | 5 | Radius | 14.0 | R14.0mm |
| 24 | 5 | Angle | 39.3 | 3x angle 39.3 deg |
| 25 | 5 | Angle | 47.2 | angle 47.2 deg |
| 26 | 6 | Diameter | 15.0 | 2x Ø15.0mm |
| 27 | 7 | Diameter | 15.0 | 2x Ø15.0mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
