Assembly - Front View
OrthographicPrimary view showing overall height, width, gripper opening, and front-facing features including the magnetic gripper interface and mounting points
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
Primary view showing overall height, width, gripper opening, and front-facing features including the magnetic gripper interface and mounting points
Reveals depth profile, gripper width, and top-mounted bearing surfaces critical for understanding the arm's reach and gripper span
Shows side profile with articulated joint geometry, gripper mechanism depth, and cylindrical bearing surfaces that define rotational axes
Vertical section through the arm's centerline reveals internal bearing bore diameters (approximately 96mm and 13.1mm), wall thicknesses between outer and inner cylindrical surfaces, and the structural layout of the gripper mechanism
Vertical section through the arm's centerline reveals internal bearing bore diameters (approximately 96mm and 13.1mm), wall thicknesses between outer and inner cylindrical surfaces, and the structural layout of the gripper mechanism
Magnifies the gripper jaw mounting area showing the 40mm diameter mounting holes and their precise spacing for the magnetic gripper interface
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
AI Transparency
The Marathon 3D→2D pipeline rendered 4 views of the 3D CAD model and passed them through our AI analysis engine.
The AI reasoned about the geometry, selected view candidates, and planned 1 section cut to expose critical internal features. It also selected detail-view anchor points for local manufacturing-critical regions. The final drawing configuration was then generated automatically for sheet outputs in SVG, DXF, and PDF.
0 dimension references were mapped across sheets, with per-sheet labels, views, and extracted edge geometry.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
A lightweight, online tool to convert 3D file formats—anytime, anywhere, without installing any software.
Drag & drop your 3D files
Supported formats: STEP (.step, .stp), IGES (.igs, .iges), STL (.stl), PLY (.ply), OFF (.off), BREP (.brp, .brep)
Open CAD files instantly in your browser.No software needed.Private uploads.Automatically deleted after 24hrs.Upload files up to 300 MB
The CAD marketplace for modern teamsEverything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
