Sheet 1
OrthographicThis sheet includes 63 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 63 geometry edges from the CAD projection pipeline.
This sheet includes 73 geometry edges from the CAD projection pipeline.
This sheet includes 33 geometry edges from the CAD projection pipeline.
This sheet includes 12 geometry edges from the CAD projection pipeline.
This sheet includes 62 geometry edges from the CAD projection pipeline.
This sheet includes 63 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the central hub area to show the detailed arrangement of bores and internal features, which are critical for assembly and function.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
HOBBYWING X8 Propeller
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 1.0 | standard_view |
| 2 | Assembly - Top View | 1.0 | standard_view |
| 3 | Assembly - Left View | 5.0 | standard_view |
| 4 | Assembly - Isometric View | 0.5 | standard_view |
| 5 | Section A-A | 1.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| profile_of_a_surface | 0.2 | B | C | low | 197 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 3 | DistanceY | 39.7 | height 39.7mm at x≈0.0mm [unverified span] | outside page band (tried 16 position(s)) |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| cylindricity | 0.2 | high | ||
| circular_runout | 0.2 | A | high | |
| circular_runout | 0.2 | A | high | |
| total_runout | 0.2 | A | high | |
| profile_of_a_surface | 0.2 | B | C | low |
All 26 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 766.9 | overall width 766.9mm |
| 2 | 1 | Radius | 130.0 | 2x R130.0mm |
| 3 | 2 | DistanceX | 767.2 | overall width 767.2mm |
| 4 | 2 | DistanceY | 28.0 | overall height 28.0mm |
| 5 | 3 | DistanceY | 32.0 | height 32.0mm at x≈-8.09925mm [unverified span] |
| 6 | 5 | DistanceX | 22.0 | width 22.0mm at y≈-4.0mm [unverified span] |
| 7 | 5 | DistanceY | 32.3 | height 32.3mm at x≈-4.0mm [unverified span] |
| 8 | 5 | DistanceY | 20.6 | height 20.6mm at x≈-6.0mm [unverified span] |
| 9 | 6 | Diameter | 4.1 | 2x Ø4.1mm |
| 10 | 6 | Diameter | 5.0 | 6x Ø5.0mm |
| 11 | 6 | DistanceY | 22.0 | hole pitch 22.0mm (vertical, Ø5) |
| 12 | 6 | Radius | 1.5 | 57x R1.5mm |
| 13 | 6 | Radius | 5.0 | 32x R5.0mm |
| 14 | 6 | Radius | 9.5 | 4x R9.5mm |
| 15 | 6 | Radius | 11.5 | 4x R11.5mm |
| 16 | 6 | Angle | 20.8 | 4x angle 20.8 deg |
| 17 | 7 | Diameter | 10.0 | Ø10.0mm |
| 18 | 7 | Diameter | 13.0 | Ø13.0mm |
| 19 | 7 | DistanceX | 22.0 | hole pitch 22.0mm (horizontal, Ø5) |
| 20 | 7 | DistanceY | 22.0 | hole pitch 22.0mm (vertical, Ø5) |
| 21 | 7 | DistanceX | 48.0 | hole pitch 48.0mm (horizontal, Ø4.1) |
| 22 | 7 | Radius | 9.5 | 4x R9.5mm |
| 23 | 7 | Radius | 11.5 | 4x R11.5mm |
| 24 | 7 | Radius | 13.5 | 2x R13.5mm |
| 25 | 7 | Angle | 20.8 | 4x angle 20.8 deg |
| 26 | 7 | DistanceX | 80.0 | hole pitch 80.0mm (2 x Ø5, from model) |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
