Sheet 1
OrthographicThis sheet includes 142 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 142 geometry edges from the CAD projection pipeline.
This sheet includes 58 geometry edges from the CAD projection pipeline.
This sheet includes 7 geometry edges from the CAD projection pipeline.
This sheet includes 120 geometry edges from the CAD projection pipeline.
This sheet includes 123 geometry edges from the CAD projection pipeline.
Magnifies the hole pattern to clearly show the arrangement and size of the holes, which are critical for identifying the correct drill bit size.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Drill Bit Holder
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 2.0 | standard_view |
| 2 | Assembly - Top View | 5.0 | standard_view |
| 3 | Assembly - Left View | 2.0 | standard_view |
| 4 | Assembly - Isometric View | 2.0 | standard_view |
| 5 | Section A-A | 2.0 | section_view |
| 6 | Detail A | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.2 | A | B | C | low | bolt/hole pattern × 3 (position) |
| profile_of_a_surface | 0.1 | A | B | C | medium | 478 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 1 | — | value drifted: asked 25, measured 14.2642 | ||
| 7 | — | value drifted: asked 7.1, measured 4.38602 | ||
| 7 | — | value drifted: asked 8.9, measured 12.3906 |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.05 | high | ||
| position | 0.2 | diameter | A | B | C | low |
| profile_of_a_surface | 0.1 | A | B | C | medium |
All 25 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 163.6 | overall width 163.6mm |
| 2 | 1 | Distance | 152.3 | hole pitch 152.3mm (2 x Ø12.1, from model) |
| 3 | 1 | Distance | 135.3 | hole pitch 135.3mm (2 x Ø11.1, from model) |
| 4 | 1 | Distance | 119.4 | hole pitch 119.4mm (2 x Ø10.1, from model) |
| 5 | 2 | DistanceX | 163.8 | overall width 163.8mm |
| 6 | 2 | DistanceY | 32.0 | overall height 32.0mm |
| 7 | 2 | Angle | 79.3 | angle 79.3 deg |
| 8 | 3 | DistanceX | 32.0 | overall width 32.0mm |
| 9 | 3 | DistanceY | 140.2 | overall height 140.2mm |
| 10 | 3 | Angle | 24.900000000000006 | angle 24.9 deg |
| 11 | 3 | DistanceX | 30.1 | width 30.1mm at y≈-60.96959999999999mm [unverified span] |
| 12 | 3 | DistanceX | 10.4 | width 10.4mm at y≈-69.3792mm [unverified span] |
| 13 | 3 | DistanceY | 119.4 | height 119.4mm at x≈-16.8192mm [unverified span] |
| 14 | 6 | Diameter | 2.7 | 2x Ø2.7mm |
| 15 | 6 | Diameter | 2.8 | 2x Ø2.8mm |
| 16 | 6 | DistanceY | 3.4 | hole pitch 3.4mm (vertical, Ø3.2) |
| 17 | 6 | DistanceX | 8.9 | hole pitch 8.9mm (horizontal, Ø2.5) |
| 18 | 6 | DistanceY | 12.4 | hole pitch 12.4mm (vertical, Ø4.7) |
| 19 | 6 | DistanceY | 12.5 | hole pitch 12.5mm (vertical, Ø4.8) |
| 20 | 6 | Radius | 0.8 | 2x R0.8mm |
| 21 | 6 | Radius | 0.9 | 3x R0.9mm |
| 22 | 7 | Diameter | 2.7 | 2x Ø2.7mm |
| 23 | 7 | Diameter | 2.8 | 2x Ø2.8mm |
| 24 | 7 | Diameter | 2.9 | 2x Ø2.9mm |
| 25 | 7 | DistanceY | 7.1 | hole pitch 7.1mm (vertical, Ø3.6) |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
