Sheet 1
OrthographicThis sheet includes 105 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 105 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
This sheet includes 81 geometry edges from the CAD projection pipeline.
This sheet includes 84 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the pattern of small through-holes along the bottom edge, essential for fastening and ventilation.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Biosafety Cabinet 6ft Vertical Laminar Flow Unit
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 0.5 | standard_view |
| 2 | Assembly - Top View | 0.5 | standard_view |
| 3 | Assembly - Left View | 1.0 | standard_view |
| 4 | Assembly - Isometric View | 0.25 | standard_view |
| 5 | Section A-A | 0.5 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.25 | A | B | C | medium | bolt/hole pattern × 9 (position) |
| position | 0.15 | A | B | C | low | bolt/hole pattern × 4 (position) |
| position | 0.5 | A | B | C | medium | bolt/hole pattern × 4 (position) |
| position | 0.3 | A | B | C | medium | bolt/hole pattern × 16 (position) |
| position | 0.2 | A | B | C | low | bolt/hole pattern × 6 (position) |
| position | 0.15 | A | B | C | low | bolt/hole pattern × 16 (position) |
| position | 0.2 | A | B | C | low | bolt/hole pattern × 8 (position) |
| position | 0.2 | A | B | C | low | bolt/hole pattern × 8 (position) |
| position | 0.25 | A | B | C | medium | bolt/hole pattern × 18 (position) |
| position | 0.5 | A | B | C | medium | bolt/hole pattern × 9 (position) |
| position | 0.15 | A | B | C | low | bolt/hole pattern × 12 (position) |
| position | 0.3 | A | B | C | medium | bolt/hole pattern × 12 (position) |
| position | 0.15 | A | B | C | low | 4× Ø6 hole location (position) |
| position | 0.2 | A | B | C | low | 2× Ø10.5 hole location (position) |
| profile_of_a_surface | 0.6 | A | B | C | medium | 962 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 3 | Angle | 80.0 | 5x angle 80.0 deg | overlaps prior label (tried 9 position(s)) |
| 5 | Angle | 80.0 | 5x angle 80.0 deg | overlaps prior label (tried 9 position(s)) |
| 6 | Radius | 0.5 | 6x R0.5mm | outside page band (tried 20 position(s)) |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.3 | high | ||
| position | 0.25 | diameter | A | B | C | medium |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.5 | diameter | A | B | C | medium |
| position | 0.3 | diameter | A | B | C | medium |
| position | 0.2 | diameter | A | B | C | low |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.2 | diameter | A | B | C | low |
| position | 0.2 | diameter | A | B | C | low |
| position | 0.25 | diameter | A | B | C | medium |
| position | 0.5 | diameter | A | B | C | medium |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.3 | diameter | A | B | C | medium |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.2 | diameter | A | B | C | low |
| profile_of_a_surface | 0.6 | A | B | C | high | |
| profile_of_a_surface | 0.6 | A | B | C | medium |
All 22 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 1782.0 | overall width 1782.0mm |
| 2 | 1 | DistanceY | 216.6 | overall height 216.6mm |
| 3 | 1 | DistanceX | 1780.0 | width 1780.0mm at y≈-26.73mm [unverified span] |
| 4 | 1 | DistanceX | 904.0 | width 904.0mm at y≈-53.46mm [unverified span] |
| 5 | 2 | DistanceX | 1782.0 | overall width 1782.0mm |
| 6 | 2 | DistanceY | 840.3 | overall height 840.3mm |
| 7 | 2 | DistanceX | 1760.0 | width 1760.0mm at y≈400.95mm [unverified span] |
| 8 | 3 | DistanceX | 836.7 | overall width 836.7mm |
| 9 | 3 | DistanceY | 216.6 | overall height 216.6mm |
| 10 | 3 | Diameter | 4.6 | Ø4.6mm |
| 11 | 3 | Radius | 5.0 | R5.0mm |
| 12 | 3 | Radius | 6.0 | 2x R6.0mm |
| 13 | 3 | Radius | 6.5 | 2x R6.5mm |
| 14 | 3 | Angle | 87.0 | 2x angle 87.0 deg |
| 15 | 5 | DistanceX | 836.7 | overall width 836.7mm |
| 16 | 5 | DistanceY | 216.6 | overall height 216.6mm |
| 17 | 5 | Diameter | 6.0 | Ø6.0mm |
| 18 | 5 | Diameter | 12.0 | Ø12.0mm |
| 19 | 5 | Radius | 3.6 | 2x R3.6mm |
| 20 | 5 | Radius | 5.0 | R5.0mm |
| 21 | 5 | Radius | 6.5 | 2x R6.5mm |
| 22 | 5 | Angle | 87.0 | 3x angle 87.0 deg |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
