AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
Shows the full layout of the 12 outer mounting holes and 4 inner mounting holes, the concentric bolt circles (119.5 mm and 102 mm), and the overall circular geometry; essential for verifying hole pattern and flange dimensions.
Reveals the overall height (8.0 mm), the central bore diameter (90 mm), the outer flange diameter (140 mm), and the thickness of the main ring; critical for dimensional control and assembly clearance.
Provides side profile showing the stepped geometry, the 5 mm wall thickness of the outer flange, and the 2.5 mm fillets at the inner and outer edges; useful for verifying edge transitions and wall uniformity.
Reveals the internal bore (90 mm), the outer flange thickness (70 mm radius to 57.5 mm radius), and the wall thickness of the main ring (8.0 mm total height, with 4.0 mm mid-height); shows how the inner and outer diameters relate in cross-section.
Reveals the internal bore (90 mm), the outer flange thickness (70 mm radius to 57.5 mm radius), and the wall thickness of the main ring (8.0 mm total height, with 4.0 mm mid-height); shows how the inner and outer diameters relate in cross-section.
Magnifies the 2.5 mm fillet at the inner edge of the central bore and the 2.117 mm fillet at the 4.234 mm diagonal hole location; critical for ensuring stress relief and avoiding sharp edges in high-load areas.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →
The CAD marketplace for modern teamsEverything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
