Sheet 2
OrthographicThis sheet includes 63 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 63 geometry edges from the CAD projection pipeline.
This sheet includes 60 geometry edges from the CAD projection pipeline.
This sheet includes 64 geometry edges from the CAD projection pipeline.
This sheet includes 54 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies one of the fan units to show the detailed fin structure and bolt pattern.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
CME530 Air-Cooled Heat Exchanger
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 0.25 | standard_view |
| 2 | Assembly - Top View | 0.25 | standard_view |
| 3 | Assembly - Left View | 1.0 | standard_view |
| 4 | Assembly - Isometric View | 0.16 | standard_view |
| 5 | Section A-A | 0.25 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.2 | A | B | C | low | bolt/hole pattern × 12 (position) |
| profile_of_a_surface | 0.8 | A | B | C | medium | 155 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| profile_of_a_surface | 0.8 | A | B | C | medium | largest surface (1370 mm) reached by no other frame — profile locates it to the datum frame instead of leaving it to the general tolerance note |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 5 | — | value drifted: asked 15.1, measured 448.601 |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.4 | high | ||
| perpendicularity | 0.4 | A | high | |
| parallelism | 0.2 | A | high | |
| position | 0.2 | diameter | A | B | C | low |
| profile_of_a_surface | 0.8 | A | B | C | medium | |
| profile_of_a_surface | 0.8 | A | B | C | medium |
All 23 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 2 | DistanceX | 3525.5 | overall width 3525.5mm |
| 2 | 2 | DistanceY | 635.0 | overall height 635.0mm |
| 3 | 2 | Diameter | 41.3 | Ø41.3mm |
| 4 | 2 | Radius | 50.8 | 2x R50.8mm |
| 5 | 2 | DistanceX | 3423.9 | width 3423.9mm at y≈264.414mm [unverified span] |
| 6 | 2 | DistanceY | 539.8 | height 539.8mm at x≈-1745.1324mm [unverified span] |
| 7 | 3 | DistanceX | 635.0 | overall width 635.0mm |
| 8 | 3 | DistanceY | 552.5 | overall height 552.5mm |
| 9 | 3 | Diameter | 6.3 | 12x Ø6.3mm |
| 10 | 3 | DistanceX | 15.1 | hole pitch 15.1mm (horizontal, Ø6.3) |
| 11 | 3 | DistanceY | 15.2 | hole pitch 15.2mm (vertical, Ø6.3) |
| 12 | 3 | Radius | 3.2 | 13x R3.2mm |
| 13 | 3 | Radius | 4.8 | 4x R4.8mm |
| 14 | 3 | Radius | 5.1 | R5.1mm |
| 15 | 5 | DistanceX | 635.0 | overall width 635.0mm |
| 16 | 5 | Diameter | 6.3 | 39x Ø6.3mm |
| 17 | 5 | DistanceY | 15.2 | hole pitch 15.2mm (vertical, Ø6.3) |
| 18 | 5 | Radius | 3.2 | 27x R3.2mm |
| 19 | 5 | Radius | 3.3 | 2x R3.3mm |
| 20 | 5 | Radius | 4.8 | 4x R4.8mm |
| 21 | 5 | Radius | 50.8 | 2x R50.8mm |
| 22 | 6 | Radius | 3.2 | 2x R3.2mm |
| 23 | 6 | Radius | 5.1 | 2x R5.1mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
