Sheet 1
OrthographicThis sheet includes 105 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 105 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
This sheet includes 131 geometry edges from the CAD projection pipeline.
This sheet includes 113 geometry edges from the CAD projection pipeline.
This sheet includes 113 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
Magnifies the trigger mechanism and internal linkages for clarity on small, critical features.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Airsoft AEG V2 Assembly for M4 Derivations
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 2.0 | standard_view |
| 2 | Assembly - Top View | 2.0 | standard_view |
| 3 | Assembly - Left View | 2.0 | standard_view |
| 4 | Assembly - Isometric View | 2.0 | standard_view |
| 5 | Section A-A | 2.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.15 | A | B | C | low | bolt/hole pattern × 8 (position) |
| position | 0.15 | A | B | C | low | bolt/hole pattern × 6 (position) |
| position | 0.15 | A | B | C | low | bolt/hole pattern × 7 (position) |
| position | 0.15 | A | B | C | low | bolt/hole pattern × 5 (position) |
| position | 0.1 | A | B | C | medium | bolt/hole pattern × 4 (position) |
| position | 0.15 | A | B | C | low | bolt/hole pattern × 4 (position) |
| position | 0.2 | A | B | C | medium | bolt/hole pattern × 34 (position) |
| position | 0.1 | A | B | C | medium | bolt/hole pattern × 3 (position) |
| position | 0.2 | A | B | C | medium | bolt/hole pattern × 4 (position) |
| position | 0.5 | A | B | C | medium | bolt/hole pattern × 9 (position) |
| position | 0.2 | A | B | C | low | bolt/hole pattern × 6 (position) |
| position | 0.15 | A | B | C | low | bolt/hole pattern × 3 (position) |
| position | 0.3 | A | B | C | medium | bolt/hole pattern × 3 (position) |
| position | 0.1 | A | B | C | medium | bolt/hole pattern × 4 (position) |
| position | 0.2 | A | B | C | medium | bolt/hole pattern × 3 (position) |
| position | 1.0 | A | B | C | medium | bolt/hole pattern × 6 (position) |
| position | 0.25 | A | B | C | medium | bolt/hole pattern × 4 (position) |
| position | 0.25 | A | B | C | medium | bolt/hole pattern × 3 (position) |
| position | 1.0 | A | B | C | medium | bolt/hole pattern × 4 (position) |
| position | 0.2 | A | B | C | low | bolt/hole pattern × 96 (position) |
| position | 0.25 | A | B | C | medium | bolt/hole pattern × 3 (position) |
| position | 0.15 | A | B | C | low | bolt/hole pattern × 4 (position) |
| position | 0.15 | A | B | C | low | 6× Ø10 hole location (position) |
| position | 0.1 | A | B | C | medium | 6× Ø1.5 hole location (position) |
| position | 0.2 | A | B | C | low | 4× Ø15 hole location (position) |
| position | 0.2 | A | B | C | low | 4× Ø24.6 hole location (position) |
| position | 0.2 | A | B | C | medium | 4× Ø2.5 hole location (position) |
| position | 0.1 | A | B | C | medium | 3× Ø1.9 hole location (position) |
| profile_of_a_surface | 0.2 | A | B | C | medium | 2420 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 3 | Distance | 42.2 | hole pitch 42.2mm (2 x Ø3, from model) | overlaps prior label (tried 17 position(s)) |
| 3 | DistanceX | 45.1 | hole pitch 45.1mm (2 x Ø3, from model) | overlaps prior label (tried 16 position(s)) |
| 8 | Diameter | 2.5 | Ø2.5mm | Diameter ref Edge299 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 8 | Diameter | 6.1 | Ø6.1mm | Diameter ref Edge253 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 3 | — | value drifted: asked 1.2, measured 2.5 | ||
| 3 | — | value drifted: asked 1.3, measured 2.6 | ||
| 3 | — | value drifted: asked 15.2, measured 30.5 | ||
| 3 | — | value drifted: asked 35.9, measured 34.807 |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.05 | high | ||
| perpendicularity | 0.2 | A | high | |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.1 | diameter | A | B | C | medium |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.2 | diameter | A | B | C | medium |
| position | 0.1 | diameter | A | B | C | medium |
| position | 0.2 | diameter | A | B | C | medium |
| position | 0.5 | diameter | A | B | C | medium |
| position | 0.2 | diameter | A | B | C | low |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.3 | diameter | A | B | C | medium |
| position | 0.1 | diameter | A | B | C | medium |
| position | 0.2 | diameter | A | B | C | medium |
| position | 1.0 | diameter | A | B | C | medium |
| position | 0.25 | diameter | A | B | C | medium |
| position | 0.25 | diameter | A | B | C | medium |
| position | 1.0 | diameter | A | B | C | medium |
| position | 0.2 | diameter | A | B | C | low |
| position | 0.25 | diameter | A | B | C | medium |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.1 | diameter | A | B | C | medium |
| position | 0.2 | diameter | A | B | C | low |
| position | 0.2 | diameter | A | B | C | low |
| position | 0.2 | diameter | A | B | C | medium |
| position | 0.1 | diameter | A | B | C | medium |
| profile_of_a_surface | 0.2 | A | B | C | medium |
All 32 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceY | 219.7 | overall height 219.7mm |
| 2 | 1 | Radius | 0.8 | R0.8mm |
| 3 | 1 | Radius | 1.0 | 10x R1.0mm |
| 4 | 1 | Radius | 1.3 | R1.3mm |
| 5 | 1 | DistanceX | 15.0 | hole pattern width 15.0mm (8 x Ø4, from model) |
| 6 | 1 | DistanceY | 15.0 | hole pattern height 15.0mm (8 x Ø4, from model) |
| 7 | 2 | DistanceX | 25.7 | overall width 25.7mm |
| 8 | 2 | Diameter | 1.5 | Ø1.5mm |
| 9 | 2 | Radius | 1.0 | 11x R1.0mm |
| 10 | 2 | Radius | 1.2 | 2x R1.2mm |
| 11 | 2 | Radius | 1.3 | 3x R1.3mm |
| 12 | 2 | DistanceY | 120.0 | hole pitch 120.0mm (2 x Ø1.9, from model) |
| 13 | 3 | DistanceY | 19.7 | hole pitch 19.7mm (2 x Ø8, from model) |
| 14 | 3 | Distance | 19.3 | hole pitch 19.3mm (2 x Ø7, from model) |
| 15 | 3 | Distance | 33.0 | hole pitch 33.0mm (2 x Ø3, from model) |
| 16 | 6 | Diameter | 2.6 | Ø2.6mm |
| 17 | 6 | Diameter | 3.0 | 5x Ø3.0mm |
| 18 | 6 | Diameter | 10.0 | Ø10.0mm |
| 19 | 6 | Diameter | 10.2 | Ø10.2mm |
| 20 | 6 | DistanceX | 15.0 | hole pitch 15.0mm (horizontal, Ø3) |
| 21 | 6 | Radius | 1.5 | R1.5mm |
| 22 | 7 | Diameter | 2.6 | Ø2.6mm |
| 23 | 7 | Diameter | 3.0 | 5x Ø3.0mm |
| 24 | 7 | Diameter | 10.0 | Ø10.0mm |
| 25 | 7 | Diameter | 10.2 | Ø10.2mm |
| 26 | 7 | DistanceX | 15.0 | hole pitch 15.0mm (horizontal, Ø3) |
| 27 | 7 | Radius | 2.2 | 4x R2.2mm |
| 28 | 8 | Diameter | 4.7 | Ø4.7mm |
| 29 | 8 | Diameter | 4.8 | Ø4.8mm |
| 30 | 8 | Diameter | 7.1 | Ø7.1mm |
| 31 | 8 | Diameter | 7.3 | Ø7.3mm |
| 32 | 8 | Diameter | 9.9 | Ø9.9mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
