Sheet 1
OrthographicThis sheet includes 86 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 86 geometry edges from the CAD projection pipeline.
This sheet includes 85 geometry edges from the CAD projection pipeline.
This sheet includes 101 geometry edges from the CAD projection pipeline.
This sheet includes 102 geometry edges from the CAD projection pipeline.
This sheet includes 78 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the detailed pattern of small through-holes near the edge, which are critical for secure fastening.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
All Aluminum Battery Tray
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 0.88 | standard_view |
| 2 | Assembly - Top View | 1.0 | standard_view |
| 3 | Assembly - Left View | 0.88 | standard_view |
| 4 | Assembly - Isometric View | 0.88 | standard_view |
| 5 | Section A-A | 0.88 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| profile_of_a_surface | 0.2 | A | B | C | low | 374 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| cylindricity | 0.2 | high | ||
| circular_runout | 0.2 | A | high | |
| circular_runout | 0.2 | A | high | |
| total_runout | 0.2 | A | high | |
| profile_of_a_surface | 0.2 | A | B | C | low |
All 32 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 144.0 | overall width 144.0mm |
| 2 | 1 | DistanceY | 669.0 | overall height 669.0mm |
| 3 | 1 | Radius | 9.0 | 12x R9.0mm |
| 4 | 1 | Radius | 42.5 | 4x R42.5mm |
| 5 | 1 | Radius | 44.5 | 24x R44.5mm |
| 6 | 1 | DistanceY | 402.0 | hole pitch 402.0mm (2 x Ø85, from model) |
| 7 | 1 | DistanceY | 134.0 | hole pitch 134.0mm (2 x Ø85, from model) |
| 8 | 1 | DistanceX | 76.0 | hole pattern width 76.0mm (4 x Ø9, from model) |
| 9 | 2 | DistanceY | 416.7 | overall height 416.7mm |
| 10 | 2 | Diameter | 10.0 | 7x Ø10.0mm |
| 11 | 2 | Diameter | 29.8 | Ø29.8mm |
| 12 | 2 | Radius | 36.0 | R36.0mm |
| 13 | 2 | Radius | 39.0 | 5x R39.0mm |
| 14 | 2 | Radius | 40.0 | 4x R40.0mm |
| 15 | 2 | Radius | 80.0 | 5x R80.0mm |
| 16 | 2 | Angle | 51.3 | 4x angle 51.3 deg |
| 17 | 2 | DistanceX | 108.8 | hole pattern width 108.8mm (8 x Ø10, from model) |
| 18 | 2 | DistanceY | 108.8 | hole pattern height 108.8mm (8 x Ø10, from model) |
| 19 | 3 | DistanceX | 416.7 | overall width 416.7mm |
| 20 | 3 | DistanceY | 669.0 | overall height 669.0mm |
| 21 | 3 | Radius | 1.0 | 14x R1.0mm |
| 22 | 3 | Radius | 3.0 | 62x R3.0mm |
| 23 | 3 | Radius | 4.6 | 2x R4.6mm |
| 24 | 3 | Radius | 10.0 | 8x R10.0mm |
| 25 | 3 | Radius | 40.0 | 4x R40.0mm |
| 26 | 5 | DistanceX | 416.4 | overall width 416.4mm |
| 27 | 5 | DistanceY | 669.0 | overall height 669.0mm |
| 28 | 5 | Radius | 1.0 | 14x R1.0mm |
| 29 | 5 | Radius | 3.0 | 73x R3.0mm |
| 30 | 5 | DistanceY | 574.0 | height 574.0mm at x≈70.245mm [unverified span] |
| 31 | 6 | Diameter | 16.0 | 2x Ø16.0mm |
| 32 | 6 | Radius | 9.0 | 2x R9.0mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
