Sheet 1
OrthographicThis sheet includes 42 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 42 geometry edges from the CAD projection pipeline.
This sheet includes 102 geometry edges from the CAD projection pipeline.
This sheet includes 101 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the small protrusion at the bottom of the central shaft, highlighting its critical feature for alignment or connection.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Thrust Azimuth Assembly
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 0.19 | standard_view |
| 2 | Assembly - Top View | 0.1 | standard_view |
| 3 | Assembly - Left View | 0.19 | standard_view |
| 4 | Assembly - Isometric View | 0.1 | standard_view |
| 5 | Section A-A | 0.19 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| profile_of_a_surface | 0.8 | A | C | medium | 184 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 2 | Radius | 1071.6 | R1071.6mm | overlaps prior label (tried 10 position(s)) |
| 2 | Radius | 1077.2 | 2x R1077.2mm | overlaps prior label (tried 10 position(s)) |
| 2 | Radius | 1276.3 | 2x R1276.3mm | overlaps prior label (tried 10 position(s)) |
| 3 | DistanceY | 3035.7 | overall height 3035.7mm | outside page band (tried 16 position(s)) |
| 5 | DistanceY | 3035.7 | overall height 3035.7mm | outside page band (tried 16 position(s)) |
| 1 | — | value drifted: asked 1200.4, measured 682.638 | ||
| 1 | — | value drifted: asked 1409.9, measured 267.884 | ||
| 1 | — | value drifted: asked 2226.9, measured 423.102 | ||
| 1 | — | value drifted: asked 3035.8, measured 924.572 |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.4 | high | ||
| cylindricity | 0.2 | high | ||
| circular_runout | 0.2 | B | high | |
| circular_runout | 0.2 | B | high | |
| circular_runout | 0.2 | B | high | |
| profile_of_a_surface | 0.8 | A | C | high | |
| profile_of_a_surface | 0.8 | A | C | medium |
All 27 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | Radius | 974.8 | 2x R974.8mm |
| 2 | 1 | Radius | 1003.1 | 2x R1003.1mm |
| 3 | 1 | Radius | 1199.5 | 2x R1199.5mm |
| 4 | 1 | Radius | 1473.5 | 2x R1473.5mm |
| 5 | 2 | DistanceX | 2946.9 | overall width 2946.9mm |
| 6 | 2 | DistanceY | 4238.0 | overall height 4238.0mm |
| 7 | 2 | Radius | 406.9 | 2x R406.9mm |
| 8 | 2 | Radius | 1058.0 | 2x R1058.0mm |
| 9 | 2 | Radius | 1063.7 | 2x R1063.7mm |
| 10 | 3 | Diameter | 40.8 | Ø40.8mm |
| 11 | 3 | Diameter | 45.3 | Ø45.3mm |
| 12 | 3 | Radius | 22.7 | 2x R22.7mm |
| 13 | 3 | Radius | 26.6 | 2x R26.6mm |
| 14 | 3 | Radius | 56.7 | R56.7mm |
| 15 | 3 | Radius | 178.2 | 2x R178.2mm |
| 16 | 3 | Radius | 879.0 | R879.0mm |
| 17 | 3 | Radius | 1223.4 | 2x R1223.4mm |
| 18 | 3 | Angle | 51.3 | angle 51.3 deg |
| 19 | 5 | Diameter | 40.8 | Ø40.8mm |
| 20 | 5 | Diameter | 45.3 | Ø45.3mm |
| 21 | 5 | Radius | 22.7 | 2x R22.7mm |
| 22 | 5 | Radius | 26.6 | 2x R26.6mm |
| 23 | 5 | Radius | 56.7 | R56.7mm |
| 24 | 5 | Radius | 178.2 | 2x R178.2mm |
| 25 | 5 | Radius | 879.0 | R879.0mm |
| 26 | 5 | Radius | 1223.4 | 2x R1223.4mm |
| 27 | 5 | Angle | 51.3 | angle 51.3 deg |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
