Sheet 1
OrthographicThis sheet includes 94 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 94 geometry edges from the CAD projection pipeline.
This sheet includes 68 geometry edges from the CAD projection pipeline.
This sheet includes 30 geometry edges from the CAD projection pipeline.
This sheet includes 103 geometry edges from the CAD projection pipeline.
This sheet includes 85 geometry edges from the CAD projection pipeline.
This sheet includes 94 geometry edges from the CAD projection pipeline.
This sheet includes 70 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Sheet 6. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the door latch mechanism to show precise engagement and alignment details
Highlights the actuator mounting and the connection points for pneumatic tubes
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Azud Disk Water Filtration System
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 0.25 | standard_view |
| 2 | Assembly - Top View | 0.98 | standard_view |
| 3 | Assembly - Left View | 0.25 | standard_view |
| 4 | Assembly - Isometric View | 0.25 | standard_view |
| 5 | Section A-A | 0.25 | section_view |
| 6 | Section B-B | 0.98 | section_view |
| 7 | Detail C | 2.0 | detail_view |
| 8 | Detail D | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.5 | A | B | C | medium | bolt/hole pattern × 5 (position) |
| profile_of_a_surface | 0.6 | A | B | C | medium | 224 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 5 | Radius | 8.0 | 8x R8.0mm | Radius ref Edge89 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 5 | — | value drifted: asked 130, measured 15 |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.3 | high | ||
| perpendicularity | 0.3 | A | high | |
| position | 0.5 | diameter | A | B | C | medium |
| profile_of_a_surface | 0.6 | A | B | C | medium |
All 35 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 960.0 | overall width 960.0mm |
| 2 | 1 | DistanceY | 2120.0 | overall height 2120.0mm |
| 3 | 1 | Diameter | 10.0 | 8x Ø10.0mm |
| 4 | 1 | Diameter | 17.5 | 2x Ø17.5mm |
| 5 | 1 | DistanceX | 90.0 | hole pitch 90.0mm (horizontal, Ø17.5) |
| 6 | 1 | DistanceX | 200.0 | hole pitch 200.0mm (horizontal, Ø9) |
| 7 | 1 | DistanceY | 500.0 | hole pitch 500.0mm (vertical, Ø10) |
| 8 | 1 | DistanceX | 920.0 | hole pitch 920.0mm (horizontal, Ø10) |
| 9 | 2 | DistanceX | 960.0 | overall width 960.0mm |
| 10 | 2 | DistanceY | 147.5 | overall height 147.5mm |
| 11 | 2 | Radius | 1.0 | 4x R1.0mm |
| 12 | 2 | Radius | 1.3 | 4x R1.3mm |
| 13 | 2 | Radius | 3.0 | 4x R3.0mm |
| 14 | 2 | Radius | 6.0 | 2x R6.0mm |
| 15 | 3 | DistanceY | 2120.0 | overall height 2120.0mm |
| 16 | 3 | Diameter | 17.5 | 2x Ø17.5mm |
| 17 | 3 | DistanceX | 130.0 | hole pitch 130.0mm (horizontal, Ø17.5) |
| 18 | 3 | DistanceX | 85.0 | width 85.0mm at y≈-953.9999999999999mm [unverified span] |
| 19 | 3 | DistanceX | 75.0 | width 75.0mm at y≈-349.79999999999995mm [unverified span] |
| 20 | 3 | DistanceY | 2059.6 | height 2059.6mm at x≈-31.799999999999997mm [unverified span] |
| 21 | 5 | DistanceY | 2120.0 | overall height 2120.0mm |
| 22 | 5 | Diameter | 17.5 | 2x Ø17.5mm |
| 23 | 5 | Radius | 1.0 | 4x R1.0mm |
| 24 | 5 | Radius | 3.0 | 14x R3.0mm |
| 25 | 5 | Radius | 4.0 | 8x R4.0mm |
| 26 | 5 | Radius | 6.0 | 12x R6.0mm |
| 27 | 5 | Angle | 47.4 | 2x angle 47.4 deg |
| 28 | 6 | DistanceY | 960.0 | overall height 960.0mm |
| 29 | 6 | Diameter | 16.0 | Ø16.0mm |
| 30 | 6 | Radius | 1.0 | 4x R1.0mm |
| 31 | 6 | Radius | 1.2 | 4x R1.2mm |
| 32 | 6 | Radius | 3.0 | 12x R3.0mm |
| 33 | 6 | Radius | 6.0 | 10x R6.0mm |
| 34 | 7 | Diameter | 9.0 | 5x Ø9.0mm |
| 35 | 8 | Diameter | 16.0 | Ø16.0mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
