Sheet 1
OrthographicThis sheet includes 71 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 71 geometry edges from the CAD projection pipeline.
This sheet includes 80 geometry edges from the CAD projection pipeline.
This sheet includes 86 geometry edges from the CAD projection pipeline.
This sheet includes 31 geometry edges from the CAD projection pipeline.
This sheet includes 88 geometry edges from the CAD projection pipeline.
This sheet includes 86 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the central bore and surrounding ring to show precise dimensions and fit.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Battery Lipo 3S Tattu 18003S75X6
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 5.0 | standard_view |
| 2 | Assembly - Top View | 5.0 | standard_view |
| 3 | Assembly - Left View | 5.0 | standard_view |
| 4 | Assembly - Isometric View | 5.0 | standard_view |
| 5 | Section A-A | 5.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.2 | A | C | medium | bolt/hole pattern × 4 (position) |
| profile_of_a_surface | 0.2 | A | C | medium | 309 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| position | 0.2 | diameter | A | C | medium |
| profile_of_a_surface | 0.2 | A | C | medium |
All 31 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 60.0 | overall width 60.0mm |
| 2 | 1 | DistanceY | 81.1 | overall height 81.1mm |
| 3 | 1 | Radius | 0.5 | 4x R0.5mm |
| 4 | 1 | Radius | 2.5 | 2x R2.5mm |
| 5 | 1 | Angle | 76.5 | angle 76.5 deg |
| 6 | 1 | Angle | 16.7 | angle 16.7 deg |
| 7 | 1 | DistanceY | 41.1 | height 41.1mm at x≈-2.0mm [unverified span] |
| 8 | 1 | DistanceY | 41.0 | height 41.0mm at x≈-28.0mm [unverified span] |
| 9 | 2 | DistanceX | 60.0 | overall width 60.0mm |
| 10 | 2 | DistanceY | 70.0 | overall height 70.0mm |
| 11 | 2 | DistanceY | 51.0 | hole pitch 51.0mm (vertical, Ø2.5) |
| 12 | 2 | Radius | 3.0 | 4x R3.0mm |
| 13 | 2 | Radius | 31.5 | 10x R31.5mm |
| 14 | 2 | Radius | 32.5 | 4x R32.5mm |
| 15 | 2 | DistanceX | 54.0 | hole pattern width 54.0mm (4 x Ø3, from model) |
| 16 | 2 | DistanceY | 54.0 | hole pattern height 54.0mm (4 x Ø3, from model) |
| 17 | 3 | DistanceX | 70.0 | overall width 70.0mm |
| 18 | 3 | DistanceY | 81.1 | overall height 81.1mm |
| 19 | 3 | Radius | 2.5 | 2x R2.5mm |
| 20 | 3 | Angle | 16.7 | 2x angle 16.7 deg |
| 21 | 3 | Angle | 60.0 | 4x angle 60.0 deg |
| 22 | 3 | DistanceX | 49.4 | hole pitch 49.4mm (2 x Ø2.5, from model) |
| 23 | 5 | DistanceY | 81.1 | overall height 81.1mm |
| 24 | 5 | Radius | 2.5 | 2x R2.5mm |
| 25 | 5 | Angle | 73.3 | 2x angle 73.3 deg |
| 26 | 5 | DistanceY | 41.1 | height 41.1mm at x≈-24.0mm [unverified span] |
| 27 | 5 | DistanceX | 49.4 | hole pitch 49.4mm (2 x Ø2.5, from model) |
| 28 | 6 | Diameter | 2.5 | 2x Ø2.5mm |
| 29 | 7 | Radius | 4.0 | 4x R4.0mm |
| 30 | 7 | Angle | 22.3 | angle 22.3 deg |
| 31 | 7 | Angle | 69.0 | angle 69.0 deg |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
