Sheet 1
OrthographicThis sheet includes 114 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 114 geometry edges from the CAD projection pipeline.
This sheet includes 86 geometry edges from the CAD projection pipeline.
This sheet includes 74 geometry edges from the CAD projection pipeline.
This sheet includes 92 geometry edges from the CAD projection pipeline.
This sheet includes 106 geometry edges from the CAD projection pipeline.
This sheet includes 106 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the central mounting hole pattern to clearly show the diameter and spacing of the smaller through-holes.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Big Robot Cell Enclosure
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 2.0 | standard_view |
| 2 | Assembly - Top View | 5.0 | standard_view |
| 3 | Assembly - Left View | 2.0 | standard_view |
| 4 | Assembly - Isometric View | 2.0 | standard_view |
| 5 | Section A-A | 2.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.2 | A | C | low | bolt/hole pattern × 4 (position) |
| position | 0.2 | A | C | medium | bolt/hole pattern × 12 (position) |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 6 | Radius | 5.6 | 8x R5.6mm | refs off printable area |
| 6 | Radius | 6.0 | 4x R6.0mm | outside page band (tried 20 position(s)) |
| 7 | Radius | 1.8 | 8x R1.8mm | Radius ref Edge59 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 7 | Radius | 5.6 | 8x R5.6mm | refs off printable area |
| 7 | Radius | 6.0 | 4x R6.0mm | outside page band (tried 20 position(s)) |
| 1 | — | value drifted: asked 84.9, measured 95.5866 |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.02 | high | ||
| position | 0.2 | diameter | A | C | low |
| position | 0.2 | diameter | A | C | medium |
All 27 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 157.0 | overall width 157.0mm |
| 2 | 1 | DistanceY | 170.7 | overall height 170.7mm |
| 3 | 1 | Diameter | 2.8 | 7x Ø2.8mm |
| 4 | 1 | Diameter | 13.2 | 4x Ø13.2mm |
| 5 | 1 | DistanceX | 60.0 | hole pattern width 60.0mm (4 x Ø12.8, from model) |
| 6 | 1 | DistanceX | 88.9 | hole pattern width 88.9mm (8 x Ø7.4, from model) |
| 7 | 1 | DistanceY | 88.9 | hole pattern height 88.9mm (8 x Ø7.4, from model) |
| 8 | 1 | DistanceX | 93.0 | hole pattern width 93.0mm (4 x Ø6.7, from model) |
| 9 | 1 | DistanceY | 93.0 | hole pattern height 93.0mm (4 x Ø6.7, from model) |
| 10 | 2 | DistanceY | 94.8 | overall height 94.8mm |
| 11 | 2 | Radius | 5.2 | 6x R5.2mm |
| 12 | 2 | Angle | 88.0 | angle 88.0 deg |
| 13 | 3 | ? | ||
| 14 | 3 | ? | ||
| 15 | 5 | DistanceX | 94.6 | overall width 94.6mm |
| 16 | 5 | DistanceY | 172.1 | overall height 172.1mm |
| 17 | 5 | Radius | 5.2 | 4x R5.2mm |
| 18 | 5 | Radius | 24.0 | 2x R24.0mm |
| 19 | 5 | Radius | 50.5 | 2x R50.5mm |
| 20 | 5 | Angle | 74.0 | 4x angle 74.0 deg |
| 21 | 5 | Angle | 85.5 | 2x angle 85.5 deg |
| 22 | 6 | Radius | 4.9 | 5x R4.9mm |
| 23 | 6 | Radius | 5.1 | 4x R5.1mm |
| 24 | 6 | Angle | 60.0 | 12x angle 60.0 deg |
| 25 | 7 | Radius | 5.1 | 4x R5.1mm |
| 26 | 7 | Radius | 5.2 | 9x R5.2mm |
| 27 | 7 | Angle | 60.0 | 12x angle 60.0 deg |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
