Assembly - Top View
OrthographicShows the complete longitudinal profile of both rotor shafts, the central stator assembly, and the overall length (178.3 mm). Essential for understanding the motor's axial geometry and shaft diameters.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
Shows the complete longitudinal profile of both rotor shafts, the central stator assembly, and the overall length (178.3 mm). Essential for understanding the motor's axial geometry and shaft diameters.
Displays the radial profile showing both bell housings, the central mounting hub, and the overall width (21.8 mm). Critical for verifying propeller clearance and arm compatibility in drone frames.
Vertical section through the motor centerline reveals internal bore diameters (shaft bores ~1.5 mm ID, ~3.93 mm OD), stator stack thickness (~3.8 mm), and the radial gap between rotor magnets and stator windings. Essential for manufacturing and assembly verification.
Vertical section through the motor centerline reveals internal bore diameters (shaft bores ~1.5 mm ID, ~3.93 mm OD), stator stack thickness (~3.8 mm), and the radial gap between rotor magnets and stator windings. Essential for manufacturing and assembly verification.
Magnifies the rear mounting flange showing the 4-hole pattern (Ø6.4 mm holes on 18.4 mm bolt circle) and the central bore (Ø1.5 mm shaft hole). Critical for frame mounting design.
Magnifies the front mounting flange with identical 4-hole pattern and central bore. Ensures symmetrical mounting capability on both ends of the motor.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →
The CAD marketplace for modern teamsEverything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
