Sheet 1
OrthographicThis sheet includes 112 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 112 geometry edges from the CAD projection pipeline.
This sheet includes 136 geometry edges from the CAD projection pipeline.
This sheet includes 59 geometry edges from the CAD projection pipeline.
This sheet includes 112 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the valve seat and guide area, allowing clear specification of the small-diameter bores and machining tolerances.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
4G63 Cylinder Head
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 1.0 | standard_view |
| 2 | Assembly - Top View | 1.0 | standard_view |
| 3 | Assembly - Left View | 2.0 | standard_view |
| 4 | Assembly - Isometric View | 1.0 | standard_view |
| 5 | Section A-A | 1.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| profile_of_a_surface | 0.4 | A | C | low | 1402 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 5 | Radius | 72.1 | 96x R72.1mm | overlaps prior label (tried 10 position(s)) |
| 2 | — | value drifted: asked 26.7, measured 41.1826 |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.05 | high | ||
| perpendicularity | 0.3 | A | high | |
| cylindricity | 0.2 | high | ||
| circular_runout | 0.2 | B | high | |
| total_runout | 0.2 | B | high | |
| profile_of_a_surface | 0.4 | A | C | low |
All 27 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 489.9 | overall width 489.9mm |
| 2 | 1 | DistanceY | 204.1 | overall height 204.1mm |
| 3 | 1 | Radius | 13.0 | 6x R13.0mm |
| 4 | 1 | Radius | 15.7 | R15.7mm |
| 5 | 1 | Radius | 24.8 | 18x R24.8mm |
| 6 | 1 | Radius | 25.1 | R25.1mm |
| 7 | 1 | Angle | 86.8 | angle 86.8 deg |
| 8 | 2 | DistanceY | 292.8 | overall height 292.8mm |
| 9 | 2 | Diameter | 13.9 | 4x Ø13.9mm |
| 10 | 2 | Diameter | 16.0 | Ø16.0mm |
| 11 | 2 | DistanceX | 42.1 | hole pitch 42.1mm (horizontal, Ø4) |
| 12 | 2 | DistanceX | 90.0 | hole pitch 90.0mm (horizontal, Ø13.9) |
| 13 | 2 | DistanceX | 93.0 | hole pitch 93.0mm (horizontal, Ø14) |
| 14 | 2 | DistanceY | 93.2 | hole pitch 93.2mm (vertical, Ø13.9) |
| 15 | 2 | DistanceX | 96.0 | hole pitch 96.0mm (horizontal, Ø11.9) |
| 16 | 2 | Radius | 7.4 | 2x R7.4mm |
| 17 | 5 | DistanceX | 292.8 | overall width 292.8mm |
| 18 | 5 | Diameter | 26.0 | 2x Ø26.0mm |
| 19 | 5 | DistanceX | 148.6 | hole pitch 148.6mm (horizontal, Ø26) |
| 20 | 5 | Radius | 35.0 | 6x R35.0mm |
| 21 | 5 | Radius | 62.5 | 8x R62.5mm |
| 22 | 5 | DistanceY | 50.5 | hole pitch 50.5mm (2 x Ø18.8, from model) |
| 23 | 5 | DistanceX | 179.5 | hole pitch 179.5mm (2 x Ø14, from model) |
| 24 | 5 | Distance | 105.1 | hole pitch 105.1mm (2 x Ø20.8, from model) |
| 25 | 8 | Diameter | 28.5 | 4x Ø28.5mm |
| 26 | 8 | Diameter | 29.0 | 4x Ø29.0mm |
| 27 | 8 | Diameter | 29.3 | 4x Ø29.3mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
