Sheet 1
OrthographicThis sheet includes 37 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 37 geometry edges from the CAD projection pipeline.
This sheet includes 45 geometry edges from the CAD projection pipeline.
This sheet includes 7 geometry edges from the CAD projection pipeline.
This sheet includes 46 geometry edges from the CAD projection pipeline.
This sheet includes 28 geometry edges from the CAD projection pipeline.
This sheet includes 44 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the central shaft and swashplate interface to show the piston bore pattern, port plate geometry, and kidney-port configuration at a scale suitable for dimensioning.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Hydraulic Piston Pump (Vickers Eaton PVQ40)
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 1.0 | standard_view |
| 2 | Assembly - Top View | 2.0 | standard_view |
| 3 | Assembly - Left View | 1.0 | standard_view |
| 4 | Assembly - Isometric View | 1.0 | standard_view |
| 5 | Section A-A | 1.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 6 | Radius | 1.6 | 23x R1.6mm | refs off printable area |
| 6 | Radius | 1.8 | 2x R1.8mm | refs off printable area |
| 6 | Radius | 2.0 | 2x R2.0mm | refs off printable area |
| 6 | Radius | 2.7 | 3x R2.7mm | refs off printable area |
| 6 | Radius | 2.8 | 5x R2.8mm | outside page band (tried 20 position(s)) |
| 6 | Radius | 3.3 | 2x R3.3mm | Radius ref Edge1155 is BSplineCurve; no nearby Circle/Arc (a substitute further away is another hole) |
| 8 | Radius | 1.1 | 13x R1.1mm | outside page band (tried 20 position(s)) |
| 8 | Radius | 1.3 | 3x R1.3mm | outside page band (tried 20 position(s)) |
| 8 | Radius | 1.4 | 6x R1.4mm | outside page band (tried 20 position(s)) |
| 8 | Radius | 1.6 | 3x R1.6mm | refs off printable area |
| 8 | Radius | 1.7 | 2x R1.7mm | outside page band (tried 20 position(s)) |
| 8 | Radius | 1.8 | 2x R1.8mm | refs off printable area |
All 32 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceY | 395.7 | overall height 395.7mm |
| 2 | 1 | Diameter | 10.6 | Ø10.6mm |
| 3 | 1 | Diameter | 30.9 | Ø30.9mm |
| 4 | 1 | Radius | 2.9 | R2.9mm |
| 5 | 1 | Radius | 6.3 | R6.3mm |
| 6 | 1 | Radius | 17.6 | 14x R17.6mm |
| 7 | 1 | Radius | 17.7 | 5x R17.7mm |
| 8 | 1 | Radius | 19.8 | 4x R19.8mm |
| 9 | 1 | Radius | 22.0 | 7x R22.0mm |
| 10 | 1 | Radius | 23.7 | 14x R23.7mm |
| 11 | 2 | Diameter | 5.8 | 4x Ø5.8mm |
| 12 | 2 | Diameter | 6.6 | 3x Ø6.6mm |
| 13 | 2 | Radius | 1.0 | 11x R1.0mm |
| 14 | 2 | Radius | 1.1 | 10x R1.1mm |
| 15 | 2 | Radius | 1.3 | R1.3mm |
| 16 | 2 | Radius | 1.6 | 74x R1.6mm |
| 17 | 2 | Radius | 1.9 | 2x R1.9mm |
| 18 | 2 | Radius | 2.7 | R2.7mm |
| 19 | 2 | Radius | 2.8 | R2.8mm |
| 20 | 2 | Radius | 3.2 | 6x R3.2mm |
| 21 | 5 | Radius | 15.4 | R15.4mm |
| 22 | 6 | Diameter | 7.0 | Ø7.0mm |
| 23 | 6 | Diameter | 8.7 | Ø8.7mm |
| 24 | 6 | Radius | 2.2 | 13x R2.2mm |
| 25 | 6 | Radius | 3.2 | 3x R3.2mm |
| 26 | 7 | Radius | 2.8 | 3x R2.8mm |
| 27 | 7 | Radius | 3.1 | 6x R3.1mm |
| 28 | 7 | Radius | 3.2 | 48x R3.2mm |
| 29 | 8 | Diameter | 3.5 | Ø3.5mm |
| 30 | 8 | Diameter | 4.4 | Ø4.4mm |
| 31 | 8 | Radius | 2.6 | 2x R2.6mm |
| 32 | 8 | Radius | 2.8 | 2x R2.8mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
