Sheet 1
OrthographicThis sheet includes 53 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 53 geometry edges from the CAD projection pipeline.
This sheet includes 102 geometry edges from the CAD projection pipeline.
This sheet includes 92 geometry edges from the CAD projection pipeline.
This sheet includes 94 geometry edges from the CAD projection pipeline.
This sheet includes 53 geometry edges from the CAD projection pipeline.
This sheet includes 53 geometry edges from the CAD projection pipeline.
This sheet includes 53 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the small hole pattern and internal ribbing of the mounting bracket.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Cessna 172 G1000 Cockpit Panel Assembly
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 2.0 | standard_view |
| 2 | Assembly - Top View | 2.0 | standard_view |
| 3 | Assembly - Isometric View | 2.0 | standard_view |
| 4 | Assembly - Front Hidden View | 2.0 | standard_view |
| 5 | Section A-A | 2.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| profile_of_a_surface | 0.1 | A | B | C | medium | 426 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 4 | — | value drifted: asked 16, measured 7.77817 | ||
| 4 | — | value drifted: asked 19, measured 128.431 |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.05 | high | ||
| cylindricity | 0.2 | high | ||
| profile_of_a_surface | 0.1 | A | B | C | medium |
All 33 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 228.9 | overall width 228.9mm |
| 2 | 1 | DistanceY | 229.5 | overall height 229.5mm |
| 3 | 1 | Radius | 0.6 | R0.6mm |
| 4 | 2 | DistanceY | 160.1 | overall height 160.1mm |
| 5 | 2 | Radius | 1.9 | R1.9mm |
| 6 | 2 | Angle | 63.7 | 6x angle 63.7 deg |
| 7 | 2 | Angle | 71.6 | 4x angle 71.6 deg |
| 8 | 4 | DistanceX | 228.9 | overall width 228.9mm |
| 9 | 4 | DistanceY | 229.5 | overall height 229.5mm |
| 10 | 4 | DistanceY | 19.0 | hole pitch 19.0mm (vertical, Ø2) |
| 11 | 4 | Angle | 75.0 | angle 75.0 deg |
| 12 | 4 | Angle | 60.0 | 4x angle 60.0 deg |
| 13 | 5 | Radius | 1.6 | R1.6mm |
| 14 | 5 | Radius | 3.4 | R3.4mm |
| 15 | 5 | Angle | 71.6 | 4x angle 71.6 deg |
| 16 | 5 | Angle | 84.3 | angle 84.3 deg |
| 17 | 6 | Radius | 0.5 | 3x R0.5mm |
| 18 | 6 | Radius | 0.9 | R0.9mm |
| 19 | 6 | Radius | 1.0 | 6x R1.0mm |
| 20 | 6 | Radius | 2.0 | 5x R2.0mm |
| 21 | 6 | Radius | 2.2 | 10x R2.2mm |
| 22 | 7 | Radius | 0.5 | 3x R0.5mm |
| 23 | 7 | Radius | 1.0 | 6x R1.0mm |
| 24 | 7 | Radius | 2.0 | 5x R2.0mm |
| 25 | 7 | Radius | 2.2 | 10x R2.2mm |
| 26 | 7 | Radius | 14.0 | R14.0mm |
| 27 | 7 | DistanceY | 41.7 | hole pattern height 41.7mm (4 x Ø2.5, from model) |
| 28 | 8 | Radius | 0.5 | 3x R0.5mm |
| 29 | 8 | Radius | 1.0 | 6x R1.0mm |
| 30 | 8 | Radius | 2.0 | 5x R2.0mm |
| 31 | 8 | Radius | 2.2 | 10x R2.2mm |
| 32 | 8 | Radius | 14.0 | R14.0mm |
| 33 | 8 | DistanceY | 41.7 | hole pattern height 41.7mm (4 x Ø2.5, from model) |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
