Sheet 1
OrthographicThis sheet includes 90 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 90 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
This sheet includes 77 geometry edges from the CAD projection pipeline.
This sheet includes 89 geometry edges from the CAD projection pipeline.
This sheet includes 110 geometry edges from the CAD projection pipeline.
This sheet includes 118 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the propeller hub and engine cowling to show the mounting holes and attachment details.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Cessna 172 Style Small Aircraft Assembly
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 5.0 | standard_view |
| 2 | Assembly - Top View | 2.0 | standard_view |
| 3 | Assembly - Left View | 5.0 | standard_view |
| 4 | Assembly - Isometric View | 2.0 | standard_view |
| 5 | Section A-A | 5.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.1 | A | B | C | medium | bolt/hole pattern × 3 (position) |
| profile_of_a_surface | 0.1 | A | B | C | medium | 654 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 3 | DistanceX | 141.8 | overall width 141.8mm | outside page band (tried 16 position(s)) |
| 5 | — | value drifted: asked 0.5, measured 2.51266 | ||
| 5 | — | value drifted: asked 0.8, measured 4.17884 | ||
| 5 | — | value drifted: asked 1.2, measured 6.20461 | ||
| 5 | — | value drifted: asked 1.7, measured 8.39779 | ||
| 5 | — | value drifted: asked 4.1, measured 20.343 |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.05 | high | ||
| perpendicularity | 0.2 | A | high | |
| position | 0.1 | diameter | A | B | C | medium |
| profile_of_a_surface | 0.1 | A | B | C | medium |
All 25 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 160.1 | overall width 160.1mm |
| 2 | 1 | DistanceX | 30.7 | hole pitch 30.7mm (2 x Ø2, from model) |
| 3 | 2 | DistanceX | 160.1 | overall width 160.1mm |
| 4 | 2 | DistanceY | 141.8 | overall height 141.8mm |
| 5 | 2 | Radius | 1.3 | 9x R1.3mm |
| 6 | 2 | Radius | 38.8 | R38.8mm |
| 7 | 2 | Angle | 86.9 | 2x angle 86.9 deg |
| 8 | 2 | DistanceX | 64.5 | hole pitch 64.5mm (2 x Ø2.5, from model) |
| 9 | 5 | Angle | 26.5 | 2x angle 26.5 deg |
| 10 | 6 | Radius | 1.0 | 14x R1.0mm |
| 11 | 6 | Radius | 2.3 | R2.3mm |
| 12 | 6 | Angle | 24.8 | angle 24.8 deg |
| 13 | 6 | DistanceX | 5.8 | hole pitch 5.8mm (2 x Ø2, from model) |
| 14 | 7 | Radius | 0.9 | R0.9mm |
| 15 | 7 | Radius | 1.6 | 2x R1.6mm |
| 16 | 7 | Radius | 1.8 | R1.8mm |
| 17 | 7 | Radius | 1.9 | R1.9mm |
| 18 | 7 | Radius | 2.5 | 2x R2.5mm |
| 19 | 7 | Angle | 3.7 | angle 3.7 deg |
| 20 | 7 | Angle | 84.5 | angle 84.5 deg |
| 21 | 8 | Radius | 0.8 | 2x R0.8mm |
| 22 | 8 | Radius | 1.3 | 3x R1.3mm |
| 23 | 8 | Radius | 1.8 | R1.8mm |
| 24 | 8 | Angle | 5.8 | 4x angle 5.8 deg |
| 25 | 8 | Angle | 84.5 | angle 84.5 deg |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
