Sheet 1
OrthographicThis sheet includes 101 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 101 geometry edges from the CAD projection pipeline.
This sheet includes 111 geometry edges from the CAD projection pipeline.
This sheet includes 100 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
This sheet includes 106 geometry edges from the CAD projection pipeline.
Magnifies the bolt pattern on the end flange to clearly show the spacing and diameter of the bolts.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Steam Boiler Cleaver Brooks 500HP
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 0.16 | standard_view |
| 2 | Assembly - Left View | 0.19 | standard_view |
| 3 | Assembly - Top View | 0.16 | standard_view |
| 4 | Assembly - Isometric View | 0.1 | standard_view |
| 5 | Section A-A | 0.19 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| profile_of_a_surface | 0.8 | A | B | C | medium | 1234 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| position | 0.3 | A | B | C | low | bolt/hole pattern × 49 (position) |
| position | 0.15 | A | B | C | low | bolt/hole pattern × 26 (position) |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| cylindricity | 0.2 | high | ||
| profile_of_a_surface | 0.8 | A | B | C | medium | |
| position | 0.3 | diameter | A | B | C | low |
| position | 0.15 | diameter | A | B | C | low |
All 34 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 5788.0 | overall width 5788.0mm |
| 2 | 1 | DistanceY | 2987.7 | overall height 2987.7mm |
| 3 | 1 | Diameter | 76.2 | Ø76.2mm |
| 4 | 1 | Diameter | 225.4 | Ø225.4mm |
| 5 | 1 | Radius | 15.9 | 3x R15.9mm |
| 6 | 1 | Radius | 25.4 | 3x R25.4mm |
| 7 | 1 | Radius | 38.1 | 3x R38.1mm |
| 8 | 1 | Radius | 76.2 | 4x R76.2mm |
| 9 | 1 | Radius | 101.6 | 2x R101.6mm |
| 10 | 1 | DistanceX | 82.5 | hole pitch 82.5mm (2 x Ø31.8, from model) |
| 11 | 2 | DistanceX | 3286.1 | overall width 3286.1mm |
| 12 | 2 | Diameter | 226.4 | Ø226.4mm |
| 13 | 2 | Diameter | 234.9 | Ø234.9mm |
| 14 | 2 | DistanceX | 962.3 | hole pitch 962.3mm (horizontal, Ø50.8) |
| 15 | 2 | DistanceY | 962.3 | hole pitch 962.3mm (vertical, Ø50.8) |
| 16 | 2 | DistanceY | 1752.6 | hole pitch 1752.6mm (vertical, Ø63.5) |
| 17 | 2 | DistanceX | 2514.6 | hole pattern width 2514.6mm (16 x Ø50.8, from model) |
| 18 | 2 | DistanceY | 2514.6 | hole pattern height 2514.6mm (16 x Ø50.8, from model) |
| 19 | 2 | DistanceX | 784.7 | hole pattern width 784.7mm (10 x Ø9.5, from model) |
| 20 | 2 | DistanceY | 746.3 | hole pattern height 746.3mm (10 x Ø9.5, from model) |
| 21 | 3 | DistanceX | 5788.0 | overall width 5788.0mm |
| 22 | 3 | DistanceY | 3290.9 | overall height 3290.9mm |
| 23 | 3 | Diameter | 76.2 | 2x Ø76.2mm |
| 24 | 3 | Diameter | 127.0 | 3x Ø127.0mm |
| 25 | 3 | DistanceX | 450.8 | hole pitch 450.8mm (horizontal, Ø127) |
| 26 | 3 | DistanceX | 2517.8 | hole pitch 2517.8mm (horizontal, Ø76.2) |
| 27 | 3 | Radius | 95.2 | 2x R95.2mm |
| 28 | 3 | Radius | 101.6 | R101.6mm |
| 29 | 3 | Radius | 190.5 | 2x R190.5mm |
| 30 | 3 | Radius | 336.6 | 2x R336.6mm |
| 31 | 6 | Diameter | 19.1 | Ø19.1mm |
| 32 | 7 | Diameter | 19.1 | Ø19.1mm |
| 33 | 7 | Diameter | 50.8 | 15x Ø50.8mm |
| 34 | 7 | Diameter | 60.3 | Ø60.3mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
