Sheet 1
OrthographicThis sheet includes 97 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 97 geometry edges from the CAD projection pipeline.
This sheet includes 94 geometry edges from the CAD projection pipeline.
This sheet includes 78 geometry edges from the CAD projection pipeline.
This sheet includes 101 geometry edges from the CAD projection pipeline.
This sheet includes 101 geometry edges from the CAD projection pipeline.
This sheet includes 98 geometry edges from the CAD projection pipeline.
This sheet includes 94 geometry edges from the CAD projection pipeline.
This sheet includes 76 geometry edges from the CAD projection pipeline.
This sheet includes 76 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Sheet 6. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the cockpit window pattern and surrounding frame details for clarity.
Highlights the engine inlet geometry and boundary layer control system openings.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Concorde Aircraft Assembly
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 1.0 | standard_view |
| 2 | Assembly - Top View | 0.44 | standard_view |
| 3 | Assembly - Left View | 0.5 | standard_view |
| 4 | Assembly - Isometric View | 0.44 | standard_view |
| 5 | Section A-A | 1.0 | section_view |
| 6 | Section B-B | 0.5 | section_view |
| 7 | Detail C | 2.0 | detail_view |
| 8 | Detail D | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.2 | A | B | C | low | bolt/hole pattern × 22 (position) |
| position | 0.2 | A | B | C | low | 4× Ø16.62 hole location (position) |
| profile_of_a_surface | 0.2 | A | B | C | medium | 423 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 2 | DistanceY | 1317.2 | overall height 1317.2mm | outside page band (tried 16 position(s)) |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.1 | high | ||
| perpendicularity | 0.2 | A | high | |
| position | 0.2 | diameter | A | B | C | low |
| position | 0.2 | diameter | A | B | C | low |
| profile_of_a_surface | 0.2 | A | B | C | medium |
All 43 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 672.3 | overall width 672.3mm |
| 2 | 1 | DistanceY | 265.4 | overall height 265.4mm |
| 3 | 1 | Radius | 1.0 | 8x R1.0mm |
| 4 | 1 | Radius | 1.7 | R1.7mm |
| 5 | 1 | Radius | 2.8 | R2.8mm |
| 6 | 1 | DistanceX | 143.0 | hole pitch 143.0mm (2 x Ø5.6, from model) |
| 7 | 2 | DistanceX | 141.3 | hole pitch 141.3mm (horizontal, Ø5.6) |
| 8 | 2 | Radius | 1.0 | 8x R1.0mm |
| 9 | 2 | Radius | 30.3 | 2x R30.3mm |
| 10 | 2 | Radius | 216.0 | 2x R216.0mm |
| 11 | 2 | Angle | 4.9 | 2x angle 4.9 deg |
| 12 | 3 | DistanceX | 1317.2 | overall width 1317.2mm |
| 13 | 3 | Diameter | 19.2 | 2x Ø19.2mm |
| 14 | 3 | Diameter | 25.4 | 2x Ø25.4mm |
| 15 | 3 | Diameter | 29.4 | 2x Ø29.4mm |
| 16 | 3 | DistanceX | 40.0 | hole pitch 40.0mm (horizontal, Ø8.8) |
| 17 | 3 | Radius | 1.0 | 5x R1.0mm |
| 18 | 3 | Radius | 1.8 | 4x R1.8mm |
| 19 | 3 | Angle | 36.099999999999994 | angle 36.1 deg |
| 20 | 5 | Diameter | 19.2 | 2x Ø19.2mm |
| 21 | 5 | Diameter | 29.4 | 2x Ø29.4mm |
| 22 | 5 | DistanceX | 40.0 | hole pitch 40.0mm (horizontal, Ø8.8) |
| 23 | 5 | Angle | 48.8 | angle 48.8 deg |
| 24 | 5 | Angle | 75.9 | angle 75.9 deg |
| 25 | 6 | Diameter | 18.6 | Ø18.6mm |
| 26 | 6 | Diameter | 19.2 | 2x Ø19.2mm |
| 27 | 6 | DistanceX | 40.0 | hole pitch 40.0mm (horizontal, Ø8.8) |
| 28 | 6 | Angle | 48.8 | angle 48.8 deg |
| 29 | 6 | Angle | 75.9 | angle 75.9 deg |
| 30 | 7 | Diameter | 5.6 | Ø5.6mm |
| 31 | 7 | Radius | 2.0 | 16x R2.0mm |
| 32 | 8 | Diameter | 5.6 | 2x Ø5.6mm |
| 33 | 8 | Radius | 2.0 | 32x R2.0mm |
| 34 | 9 | Diameter | 10.0 | Ø10.0mm |
| 35 | 9 | Diameter | 16.6 | Ø16.6mm |
| 36 | 9 | Diameter | 18.6 | Ø18.6mm |
| 37 | 9 | Radius | 2.0 | 4x R2.0mm |
| 38 | 9 | Angle | 65.0 | 2x angle 65.0 deg |
| 39 | 10 | Diameter | 10.0 | Ø10.0mm |
| 40 | 10 | Diameter | 16.6 | Ø16.6mm |
| 41 | 10 | Diameter | 18.6 | Ø18.6mm |
| 42 | 10 | Radius | 2.0 | 4x R2.0mm |
| 43 | 10 | Angle | 65.0 | 2x angle 65.0 deg |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
