Sheet 2
OrthographicThis sheet includes 120 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 120 geometry edges from the CAD projection pipeline.
This sheet includes 119 geometry edges from the CAD projection pipeline.
This sheet includes 109 geometry edges from the CAD projection pipeline.
Magnifies the central bore pattern on the base, highlighting the precise hole locations and sizes for motor or sensor mounting.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
RobotAnno SJ602A Desktop 6-Axis Robot Arm
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 1.0 | standard_view |
| 2 | Assembly - Top View | 0.84 | standard_view |
| 3 | Assembly - Left View | 1.0 | standard_view |
| 4 | Assembly - Isometric View | 0.84 | standard_view |
| 5 | Section A-A | 1.0 | section_view |
| 6 | Section B-B | 0.84 | section_view |
| 7 | Detail C | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.15 | A | B | C | low | bolt/hole pattern × 8 (position) |
| position | 0.2 | A | B | C | medium | bolt/hole pattern × 16 (position) |
| position | 0.2 | A | B | C | medium | bolt/hole pattern × 10 (position) |
| position | 0.15 | A | B | C | low | bolt/hole pattern × 6 (position) |
| position | 0.15 | A | B | C | low | bolt/hole pattern × 9 (position) |
| position | 0.15 | A | B | C | low | bolt/hole pattern × 4 (position) |
| position | 0.25 | A | B | C | medium | bolt/hole pattern × 6 (position) |
| position | 0.3 | A | B | C | medium | bolt/hole pattern × 3 (position) |
| position | 0.25 | A | B | C | medium | bolt/hole pattern × 16 (position) |
| position | 0.15 | A | B | C | low | bolt/hole pattern × 4 (position) |
| position | 0.15 | A | B | C | low | bolt/hole pattern × 8 (position) |
| position | 0.2 | A | B | C | medium | bolt/hole pattern × 12 (position) |
| position | 0.2 | A | B | C | medium | bolt/hole pattern × 4 (position) |
| position | 0.1 | A | B | C | low | bolt/hole pattern × 20 (position) |
| position | 0.25 | A | B | C | medium | bolt/hole pattern × 4 (position) |
| position | 0.3 | A | B | C | medium | bolt/hole pattern × 3 (position) |
| position | 0.2 | A | B | C | medium | bolt/hole pattern × 16 (position) |
| position | 0.2 | A | B | C | medium | 4× Ø3.8 hole location (position) |
| position | 0.15 | A | B | C | low | 4× Ø7.8 hole location (position) |
| position | 0.2 | A | B | C | medium | 3× Ø2.6 hole location (position) |
| position | 0.5 | A | B | C | low | 3× Ø130 hole location (position) |
| position | 0.3 | A | B | C | medium | 2× Ø6.2 hole location (position) |
| position | 0.3 | A | B | C | low | 2× Ø85.13 hole location (position) |
| profile_of_a_surface | 0.4 | A | B | C | medium | 2586 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.2 | high | ||
| perpendicularity | 0.3 | A | high | |
| perpendicularity | 0.2 | A | high | |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.2 | diameter | A | B | C | medium |
| position | 0.2 | diameter | A | B | C | medium |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.25 | diameter | A | B | C | medium |
| position | 0.3 | diameter | A | B | C | medium |
| position | 0.25 | diameter | A | B | C | medium |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.2 | diameter | A | B | C | medium |
| position | 0.2 | diameter | A | B | C | medium |
| position | 0.1 | diameter | A | B | C | low |
| position | 0.25 | diameter | A | B | C | medium |
| position | 0.3 | diameter | A | B | C | medium |
| position | 0.2 | diameter | A | B | C | medium |
| position | 0.2 | diameter | A | B | C | medium |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.2 | diameter | A | B | C | medium |
| position | 0.5 | diameter | A | B | C | low |
| position | 0.3 | diameter | A | B | C | medium |
| position | 0.3 | diameter | A | B | C | low |
| cylindricity | 0.2 | high | ||
| circularity | 0.2 | high | ||
| profile_of_a_surface | 0.4 | A | B | C | medium |
All 8 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 2 | Diameter | 7.5 | Ø7.5mm |
| 2 | 2 | Radius | 1.3 | R1.3mm |
| 3 | 2 | Radius | 2.1 | R2.1mm |
| 4 | 2 | Radius | 4.9 | 2x R4.9mm |
| 5 | 2 | Radius | 5.7 | 3x R5.7mm |
| 6 | 2 | Radius | 6.7 | R6.7mm |
| 7 | 3 | Diameter | 3.2 | 2x Ø3.2mm |
| 8 | 3 | Radius | 7.5 | 2x R7.5mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
