Sheet 1
OrthographicThis sheet includes 99 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 99 geometry edges from the CAD projection pipeline.
This sheet includes 75 geometry edges from the CAD projection pipeline.
This sheet includes 79 geometry edges from the CAD projection pipeline.
This sheet includes 80 geometry edges from the CAD projection pipeline.
This sheet includes 96 geometry edges from the CAD projection pipeline.
This sheet includes 96 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the threaded hole pattern on the flange, showing the precise location and size of the mounting holes.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Dewatering Machine Assembly
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 2.0 | standard_view |
| 2 | Assembly - Top View | 10.0 | standard_view |
| 3 | Assembly - Left View | 2.0 | standard_view |
| 4 | Assembly - Isometric View | 2.0 | standard_view |
| 5 | Section A-A | 2.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| profile_of_a_surface | 0.1 | A | C | medium | 495 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 2 | Radius | 3.6 | 4x R3.6mm | Radius ref Edge425 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 2 | Diameter | 13.7 | 2x Ø13.7mm | Diameter ref Edge410 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 7 | Diameter | 30.0 | Ø30.0mm | outside page band (tried 20 position(s)) |
| 2 | — | value drifted: asked 76.3, measured 60.6484 | ||
| 2 | — | value drifted: asked 76.3, measured 85.5949 |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| cylindricity | 0.2 | high | ||
| profile_of_a_surface | 0.1 | A | C | medium |
All 31 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 90.8 | overall width 90.8mm |
| 2 | 1 | DistanceY | 222.3 | overall height 222.3mm |
| 3 | 1 | Diameter | 60.0 | Ø60.0mm |
| 4 | 1 | Radius | 2.0 | 5x R2.0mm |
| 5 | 1 | Radius | 2.9 | R2.9mm |
| 6 | 1 | Radius | 3.0 | 9x R3.0mm |
| 7 | 1 | Radius | 3.5 | 2x R3.5mm |
| 8 | 1 | Radius | 27.5 | 3x R27.5mm |
| 9 | 1 | Radius | 28.0 | R28.0mm |
| 10 | 2 | DistanceX | 90.8 | overall width 90.8mm |
| 11 | 2 | DistanceY | 26.0 | overall height 26.0mm |
| 12 | 2 | Diameter | 9.7 | 2x Ø9.7mm |
| 13 | 2 | Diameter | 11.7 | 2x Ø11.7mm |
| 14 | 2 | Radius | 1.5 | 10x R1.5mm |
| 15 | 3 | DistanceX | 26.0 | overall width 26.0mm |
| 16 | 3 | DistanceY | 222.3 | overall height 222.3mm |
| 17 | 3 | Radius | 0.5 | 2x R0.5mm |
| 18 | 3 | Radius | 1.0 | 2x R1.0mm |
| 19 | 3 | Radius | 1.5 | 6x R1.5mm |
| 20 | 3 | Radius | 2.0 | 2x R2.0mm |
| 21 | 5 | DistanceX | 26.0 | overall width 26.0mm |
| 22 | 5 | DistanceY | 222.3 | overall height 222.3mm |
| 23 | 5 | Radius | 1.5 | 6x R1.5mm |
| 24 | 6 | Radius | 1.4 | R1.4mm |
| 25 | 6 | Radius | 1.9 | R1.9mm |
| 26 | 6 | Radius | 3.5 | 3x R3.5mm |
| 27 | 7 | Diameter | 25.7 | 2x Ø25.7mm |
| 28 | 7 | Diameter | 33.0 | Ø33.0mm |
| 29 | 7 | Radius | 2.5 | 2x R2.5mm |
| 30 | 7 | Radius | 12.8 | 2x R12.8mm |
| 31 | 7 | Radius | 16.4 | R16.4mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
