Sheet 1
OrthographicThis sheet includes 108 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 108 geometry edges from the CAD projection pipeline.
This sheet includes 95 geometry edges from the CAD projection pipeline.
This sheet includes 107 geometry edges from the CAD projection pipeline.
This sheet includes 93 geometry edges from the CAD projection pipeline.
This sheet includes 106 geometry edges from the CAD projection pipeline.
This sheet includes 109 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the wheel and motor connection to show the shaft, bearing, and mounting hardware.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Mobile Robot Assembly
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 1.0 | standard_view |
| 2 | Assembly - Top View | 0.98 | standard_view |
| 3 | Assembly - Left View | 1.0 | standard_view |
| 4 | Assembly - Isometric View | 0.98 | standard_view |
| 5 | Section A-A | 1.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.25 | A | B | C | medium | bolt/hole pattern × 8 (position) |
| position | 0.25 | A | B | C | medium | bolt/hole pattern × 32 (position) |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 8 | Diameter | 4.0 | 4x Ø4.0mm | outside page band (tried 20 position(s)) |
| 8 | Diameter | 31.0 | 2x Ø31.0mm | outside page band (tried 20 position(s)) |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.1 | high | ||
| perpendicularity | 0.2 | A | high | |
| position | 0.25 | diameter | A | B | C | medium |
| position | 0.25 | diameter | A | B | C | medium |
All 46 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 600.0 | overall width 600.0mm |
| 2 | 1 | DistanceY | 386.4 | overall height 386.4mm |
| 3 | 1 | Diameter | 4.2 | 4x Ø4.2mm |
| 4 | 1 | DistanceY | 270.0 | hole pitch 270.0mm (vertical, Ø4.2) |
| 5 | 1 | DistanceX | 520.0 | hole pitch 520.0mm (horizontal, Ø4.2) |
| 6 | 1 | Radius | 3.0 | 2x R3.0mm |
| 7 | 1 | Radius | 4.5 | 2x R4.5mm |
| 8 | 1 | Radius | 7.9 | 2x R7.9mm |
| 9 | 1 | DistanceY | 49.5 | hole pattern height 49.5mm (4 x Ø5, from model) |
| 10 | 2 | DistanceX | 600.0 | overall width 600.0mm |
| 11 | 2 | DistanceY | 602.0 | overall height 602.0mm |
| 12 | 2 | Diameter | 5.2 | 8x Ø5.2mm |
| 13 | 2 | Diameter | 15.6 | 2x Ø15.6mm |
| 14 | 2 | Diameter | 23.8 | 2x Ø23.8mm |
| 15 | 2 | DistanceY | 40.0 | hole pitch 40.0mm (vertical, Ø4) |
| 16 | 2 | DistanceY | 380.0 | hole pitch 380.0mm (vertical, Ø15.6) |
| 17 | 2 | DistanceY | 480.0 | hole pitch 480.0mm (vertical, Ø5.2) |
| 18 | 2 | DistanceX | 520.0 | hole pattern width 520.0mm (4 x Ø4.2, from model) |
| 19 | 3 | DistanceX | 602.0 | overall width 602.0mm |
| 20 | 3 | DistanceY | 386.4 | overall height 386.4mm |
| 21 | 3 | Diameter | 5.2 | 8x Ø5.2mm |
| 22 | 3 | DistanceY | 20.0 | hole pitch 20.0mm (vertical, Ø5.2) |
| 23 | 3 | DistanceX | 480.0 | hole pitch 480.0mm (horizontal, Ø5.2) |
| 24 | 3 | DistanceY | 270.0 | hole pattern height 270.0mm (8 x Ø5.2, from model) |
| 25 | 5 | DistanceY | 386.4 | overall height 386.4mm |
| 26 | 5 | Diameter | 4.2 | 4x Ø4.2mm |
| 27 | 5 | DistanceY | 270.0 | hole pitch 270.0mm (vertical, Ø4.2) |
| 28 | 5 | DistanceX | 480.0 | hole pitch 480.0mm (horizontal, Ø4.2) |
| 29 | 5 | Radius | 4.5 | 4x R4.5mm |
| 30 | 5 | Radius | 10.0 | 4x R10.0mm |
| 31 | 6 | Radius | 2.0 | 4x R2.0mm |
| 32 | 6 | Radius | 3.0 | 4x R3.0mm |
| 33 | 6 | Radius | 4.5 | 4x R4.5mm |
| 34 | 6 | Radius | 7.9 | 4x R7.9mm |
| 35 | 7 | Diameter | 4.0 | Ø4.0mm |
| 36 | 7 | Diameter | 5.0 | 2x Ø5.0mm |
| 37 | 7 | Diameter | 65.0 | Ø65.0mm |
| 38 | 7 | DistanceX | 49.5 | hole pitch 49.5mm (horizontal, Ø5) |
| 39 | 7 | Radius | 2.1 | 2x R2.1mm |
| 40 | 7 | Radius | 2.3 | 2x R2.3mm |
| 41 | 7 | Radius | 2.5 | 4x R2.5mm |
| 42 | 7 | Radius | 4.0 | 2x R4.0mm |
| 43 | 7 | Radius | 5.0 | 6x R5.0mm |
| 44 | 8 | Diameter | 27.0 | 2x Ø27.0mm |
| 45 | 8 | Radius | 5.0 | 4x R5.0mm |
| 46 | 8 | Angle | 38.7 | 8x angle 38.7 deg |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
