Sheet 1
OrthographicThis sheet includes 92 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 92 geometry edges from the CAD projection pipeline.
This sheet includes 104 geometry edges from the CAD projection pipeline.
This sheet includes 49 geometry edges from the CAD projection pipeline.
This sheet includes 13 geometry edges from the CAD projection pipeline.
This sheet includes 49 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the small threaded detail on the damper body, ensuring clarity for manufacturing and inspection.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
DNM Burner RCP-2S Shock Absorber
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 2.0 | standard_view |
| 2 | Assembly - Top View | 2.0 | standard_view |
| 3 | Assembly - Left View | 5.0 | standard_view |
| 4 | Assembly - Isometric View | 2.0 | standard_view |
| 5 | Section A-A | 2.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.15 | A | B | C | low | bolt/hole pattern × 8 (position) |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 2 | Radius | 2.0 | R2.0mm | Radius ref Edge392 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 2 | Radius | 7.0 | R7.0mm | Radius ref Edge340 is BSplineCurve; no nearby Circle/Arc (a substitute further away is another hole) |
| 2 | Radius | 7.5 | 8x R7.5mm | Radius ref Edge335 is BSplineCurve; no nearby Circle/Arc (a substitute further away is another hole) |
| 2 | DistanceX | 105.0 | hole pitch 105.0mm (horizontal, Ø4) | outside page band (tried 16 position(s)) |
| 2 | DistanceX | 210.0 | hole pitch 210.0mm (2 x Ø10, from model) | outside page band (tried 16 position(s)) |
| 1 | — | value drifted: asked 0.5, measured 1.0004 | ||
| 1 | — | value drifted: asked 3.9, measured 7.87732 | ||
| 1 | — | value drifted: asked 6, measured 12 | ||
| 1 | — | value drifted: asked 7, measured 13.9419 | ||
| 1 | — | value drifted: asked 7.5, measured 15.0509 | ||
| 1 | — | value drifted: asked 9, measured 17.9406 | ||
| 2 | — | value drifted: asked 0.5, measured 2 | ||
| 2 | — | value drifted: asked 4, measured 8 | ||
| 2 | — | value drifted: asked 6, measured 12 |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| cylindricity | 0.2 | high | ||
| position | 0.15 | diameter | A | B | C | low |
| circular_runout | 0.2 | A | high |
All 13 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 3 | Diameter | 15.0 | Ø15.0mm |
| 2 | 3 | Diameter | 31.6 | Ø31.6mm |
| 3 | 3 | Diameter | 33.8 | Ø33.8mm |
| 4 | 3 | Radius | 19.1 | R19.1mm |
| 5 | 5 | Diameter | 32.0 | Ø32.0mm |
| 6 | 5 | Diameter | 33.8 | Ø33.8mm |
| 7 | 5 | DistanceX | 48.0 | width 48.0mm at y≈-16.0mm [unverified span] |
| 8 | 6 | Radius | 2.0 | 6x R2.0mm |
| 9 | 6 | Radius | 11.0 | 5x R11.0mm |
| 10 | 6 | Radius | 13.0 | 2x R13.0mm |
| 11 | 6 | Radius | 16.0 | 2x R16.0mm |
| 12 | 6 | Radius | 23.0 | R23.0mm |
| 13 | 6 | Radius | 25.0 | R25.0mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
