Standard conversions from live pricingLive pricingSTEP or STP to 2D drawings2D drawingsSee conversion pricingPricing

2D Technical Drawings AI Generated

Dry Cooler Industrial Heat Exchange Equipment 2D Technical Drawing Set

Drawing sheets

Views analysed

Export formats

Section cuts

1st Angle

Projection type

27 Aug 2026

Generated date

STEP

Source CAD format

Dry Cooler Industrial Heat Exchange Equipment

Source 3D model

Preview · 2D Drawing Sheets

1 / 7

Verify critical dimensions against the source CAD model before using these drawings for manufacturing or production release. Download the FCStd file where available for the most accurate editable source.

Sheet 1

AI Drawing Analysis

What the AI Decided & Why

The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.

Sheet 1

Orthographic

This sheet includes 119 geometry edges from the CAD projection pipeline.

Sheet 2

Orthographic

This sheet includes 111 geometry edges from the CAD projection pipeline.

Sheet 3

Orthographic

This sheet includes 112 geometry edges from the CAD projection pipeline.

Sheet 5

Orthographic

This sheet includes 100 geometry edges from the CAD projection pipeline.

Sheet 6

Orthographic

This sheet includes 108 geometry edges from the CAD projection pipeline.

Sheet 7

Orthographic

This sheet includes 106 geometry edges from the CAD projection pipeline.

Sheet 8

Orthographic

This sheet includes 108 geometry edges from the CAD projection pipeline.

Sheet 5section_a · Section5

sheet_num: 5 · edges: 100

Sheet 5. Geometry is derived from the 3D model projection for this drawing set.

100 resolved edges in sheet geometry
See technical_drawing_simple.pdf, sheet_N.pdf, and svg/ for full graphical context
Verify critical dimensions against the source CAD before manufacturing

Detail Bdetail_b · base_view: Front

anchor: (0, 0, 0) · radius: 20

Magnifies the fan grille and its internal support structure, highlighting the precise spacing and alignment of the fan blades.

Detail-view anchor selected by the AI planning stage
Use with sheet PDF/SVG for local feature inspection
Validate critical dimensions against source CAD before release

Downloads

Download Individual Sheets

Each sheet available in PDF, SVG, and DXF. Click a format badge to download.

Sheet 1

Sheet 2

Sheet 3

Sheet 5

Sheet 6

Sheet 7

Sheet 8

Drawing report

Drawing details & review

Cover summary and review report for this versioned drawing set.

TECHNICAL DRAWING

6980d9b2a96c6aa4270c1493

Dry Cooler Assembly

sheets

control frames

dimensions not drawn

Sheet index

Sheet	View	Scale	Content
1	Assembly - Front View	0.44	standard_view
2	Assembly - Top View	0.5	standard_view
3	Assembly - Left View	0.44	standard_view
4	Assembly - Isometric View	0.25	standard_view
5	Section A-A	0.44	section_view
6	Detail B	2.0	detail_view

Generated automatically and intended for review before use. A companion review report lists what needs checking.

DRAWING REVIEW REPORT

6980d9b2a96c6aa4270c1493

This drawing is generated automatically and is a first draft. The items below need a human decision.

Summary

dimensions drawn

selected, not drawn

control frames

assumed tolerances

Tolerances to verify

Characteristic	Tol	Datums	Confidence	Reason
position	0.2	A \| B \| C	low	bolt/hole pattern × 16 (position)
position	0.3	A \| B \| C	low	bolt/hole pattern × 4 (position)
position	0.2	A \| B \| C	low	bolt/hole pattern × 6 (position)
position	0.2	A \| B \| C	low	bolt/hole pattern × 4 (position)
position	0.3	A \| B \| C	low	bolt/hole pattern × 4 (position)
position	0.5	A \| B \| C	low	bolt/hole pattern × 3 (position)
position	0.2	A \| B \| C	low	bolt/hole pattern × 8 (position)
position	0.3	A \| B \| C	low	bolt/hole pattern × 4 (position)
position	0.3	A \| B \| C	low	bolt/hole pattern × 12 (position)
position	0.3	A \| B \| C	low	bolt/hole pattern × 4 (position)
position	0.3	A \| B \| C	low	bolt/hole pattern × 4 (position)
position	0.2	A \| B \| C	low	bolt/hole pattern × 8 (position)
position	0.2	A \| B \| C	low	bolt/hole pattern × 4 (position)
position	0.3	A \| B \| C	low	bolt/hole pattern × 4 (position)
position	0.2	A \| B \| C	low	bolt/hole pattern × 8 (position)
position	0.15	A \| B \| C	low	bolt/hole pattern × 4 (position)
position	1.0	A \| B \| C	medium	bolt/hole pattern × 6 (position)
position	0.15	A \| B \| C	low	bolt/hole pattern × 6 (position)
position	0.5	A \| B \| C	medium	bolt/hole pattern × 8 (position)
position	1.5	A \| B \| C	medium	bolt/hole pattern × 4 (position)
position	0.75	A \| B \| C	medium	bolt/hole pattern × 4 (position)
position	0.2	A \| B \| C	medium	bolt/hole pattern × 4 (position)
position	0.5	A \| B \| C	low	6× Ø140 hole location (position)
position	0.5	A \| B \| C	low	4× Ø138 hole location (position)
position	0.3	A \| B \| C	low	4× Ø37.4 hole location (position)
position	0.2	A \| B \| C	low	4× Ø27.8 hole location (position)
position	0.5	A \| B \| C	low	3× Ø200 hole location (position)
position	0.3	A \| B \| C	low	2× Ø80 hole location (position)
profile_of_a_surface	0.4	A \| B \| C	medium	2066 face(s) have no analytic form — profile is the only control that applies to a sculpted surface

Dimensions not drawn

Sheet	Type	Value	Description	Reason
7	Diameter	51.8	4x Ø51.8mm	refs off printable area

Tolerance schedule

Characteristic	Tol	Zone	Datums	Confidence
flatness	0.1			high
perpendicularity	0.2		A	high
perpendicularity	0.3		A	high
position	0.2	diameter	A \| B \| C	low
position	0.3	diameter	A \| B \| C	low
position	0.2	diameter	A \| B \| C	low
position	0.2	diameter	A \| B \| C	low
position	0.3	diameter	A \| B \| C	low
position	0.5	diameter	A \| B \| C	low
position	0.2	diameter	A \| B \| C	low
position	0.3	diameter	A \| B \| C	low
position	0.3	diameter	A \| B \| C	low
position	0.3	diameter	A \| B \| C	low
position	0.3	diameter	A \| B \| C	low
position	0.2	diameter	A \| B \| C	low
position	0.2	diameter	A \| B \| C	low
position	0.3	diameter	A \| B \| C	low
position	0.2	diameter	A \| B \| C	low
position	0.15	diameter	A \| B \| C	low
position	1.0	diameter	A \| B \| C	medium
position	0.15	diameter	A \| B \| C	low
position	0.5	diameter	A \| B \| C	medium
position	1.5	diameter	A \| B \| C	medium
position	0.75	diameter	A \| B \| C	medium
position	0.2	diameter	A \| B \| C	medium
position	0.5	diameter	A \| B \| C	low
position	0.5	diameter	A \| B \| C	low
position	0.3	diameter	A \| B \| C	low
position	0.2	diameter	A \| B \| C	low
position	0.5	diameter	A \| B \| C	low
position	0.3	diameter	A \| B \| C	low
cylindricity	0.2			high
circularity	0.2			high
straightness	0.4	diameter		high
profile_of_a_surface	0.4		A \| B \| C	medium

Dimension schedule

All 46 dimension(s) drawn.

#	Sheet	Type	Value	Description
1	1	DistanceX	1767.0	overall width 1767.0mm
2	1	DistanceY	1326.3	overall height 1326.3mm
3	1	Diameter	870.0	Ø870.0mm
4	1	Radius	8.5	4x R8.5mm
5	1	Radius	9.0	4x R9.0mm
6	1	Radius	12.0	4x R12.0mm
7	1	Radius	27.0	4x R27.0mm
8	1	Radius	58.5	3x R58.5mm
9	1	Radius	60.3	4x R60.3mm
10	2	DistanceX	1767.0	overall width 1767.0mm
11	2	DistanceY	900.0	overall height 900.0mm
12	2	DistanceY	820.0	hole pitch 820.0mm (vertical, Ø8.5)
13	2	DistanceX	1450.0	hole pitch 1450.0mm (horizontal, Ø8.5)
14	2	Radius	31.5	8x R31.5mm
15	2	Angle	59.3	8x angle 59.3 deg
16	2	DistanceY	55.0	hole pitch 55.0mm (2 x Ø19, from model)
17	3	DistanceX	900.0	overall width 900.0mm
18	3	DistanceY	1326.3	overall height 1326.3mm
19	3	Diameter	18.0	7x Ø18.0mm
20	3	Diameter	37.4	2x Ø37.4mm
21	3	DistanceX	70.7	hole pitch 70.7mm (horizontal, Ø18)
22	3	DistanceY	70.7	hole pitch 70.7mm (vertical, Ø18)
23	3	Radius	10.0	2x R10.0mm
24	3	Radius	27.0	4x R27.0mm
25	3	Radius	50.0	2x R50.0mm
26	3	DistanceY	902.7	hole pitch 902.7mm (2 x Ø138, from model)
27	5	DistanceX	900.0	overall width 900.0mm
28	5	Diameter	8.0	12x Ø8.0mm
29	5	DistanceY	49.9	hole pitch 49.9mm (vertical, Ø8)
30	5	Radius	10.0	2x R10.0mm
31	5	Radius	20.0	2x R20.0mm
32	5	Radius	27.0	4x R27.0mm
33	5	Angle	59.0	2x angle 59.0 deg
34	5	Angle	11.300000000000011	2x angle 11.3 deg
35	5	DistanceY	902.7	hole pitch 902.7mm (2 x Ø138, from model)
36	6	Radius	10.0	8x R10.0mm
37	6	Radius	10.3	4x R10.3mm
38	6	Radius	13.0	4x R13.0mm
39	7	Diameter	8.5	4x Ø8.5mm
40	7	Diameter	29.0	4x Ø29.0mm
41	7	Diameter	41.0	4x Ø41.0mm
42	7	Diameter	63.0	4x Ø63.0mm
43	7	Angle	61.400000000000006	8x angle 61.4 deg
44	8	Radius	10.0	8x R10.0mm
45	8	Radius	10.3	4x R10.3mm
46	8	Radius	13.0	4x R13.0mm

Paid Pipeline · $5.99 per drawing set

Have your own 3D CAD file?

Upload a STEP, STP, IGES or FreeCAD file and generate a 2D drawing set with PDF, SVG and DXF outputs.

✓ Ready in under 4 minutes
✓ 9 sheets · editable FCStd + PDF, SVG, DXF
✓ No subscription · pay per file

$5.99

per drawing set incl. GST

4 min

avg. turnaround

AI Transparency

How these drawings were generated

These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.

These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.

Run Metadata

Views analysed

Sheets generated

Section cuts

Export formats

27 Aug 2026

Generated date

Explore Marathon OS