Sheet 1
OrthographicThis sheet includes 91 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 91 geometry edges from the CAD projection pipeline.
This sheet includes 54 geometry edges from the CAD projection pipeline.
This sheet includes 82 geometry edges from the CAD projection pipeline.
This sheet includes 88 geometry edges from the CAD projection pipeline.
This sheet includes 91 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the central hub and bolt pattern to show precise hole locations and shaft connections.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Dual Axis Solar Tracker Assembly
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 0.92 | standard_view |
| 2 | Assembly - Top View | 1.0 | standard_view |
| 3 | Assembly - Left View | 0.92 | standard_view |
| 4 | Assembly - Isometric View | 0.5 | standard_view |
| 5 | Section A-A | 0.92 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.15 | A | C | low | bolt/hole pattern × 16 (position) |
| position | 0.2 | A | C | low | bolt/hole pattern × 8 (position) |
| position | 0.2 | A | C | low | bolt/hole pattern × 6 (position) |
| position | 0.15 | A | C | low | bolt/hole pattern × 14 (position) |
| position | 0.15 | A | C | low | 2× Ø6 hole location (position) |
| position | 0.2 | A | C | low | 2× Ø16 hole location (position) |
| position | 0.5 | A | C | medium | 2× Ø11 hole location (position) |
| position | 0.2 | A | C | low | 2× Ø25 hole location (position) |
| position | 0.3 | A | C | low | 2× Ø59 hole location (position) |
| position | 0.3 | A | C | low | 2× Ø60 hole location (position) |
| profile_of_a_surface | 0.6 | A | C | low | 93 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 3 | Radius | 8.0 | R8.0mm | Radius ref Edge90 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 3 | Diameter | 10.0 | Ø10.0mm | Diameter ref Edge93 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 3 | Diameter | 16.0 | Ø16.0mm | Diameter ref Edge5 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 5 | — | value drifted: asked 130, measured 65 |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.1 | high | ||
| perpendicularity | 0.3 | A | high | |
| parallelism | 0.2 | A | high | |
| position | 0.15 | diameter | A | C | low |
| position | 0.2 | diameter | A | C | low |
| position | 0.2 | diameter | A | C | low |
| position | 0.15 | diameter | A | C | low |
| position | 0.15 | diameter | A | C | low |
| position | 0.2 | diameter | A | C | low |
| position | 0.5 | diameter | A | C | medium |
| position | 0.2 | diameter | A | C | low |
| position | 0.3 | diameter | A | C | low |
| position | 0.3 | diameter | A | C | low |
| profile_of_a_surface | 0.6 | A | C | low |
All 27 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 940.0 | overall width 940.0mm |
| 2 | 1 | DistanceY | 640.0 | overall height 640.0mm |
| 3 | 1 | DistanceX | 385.0 | hole pitch 385.0mm (horizontal, Ø10) |
| 4 | 1 | DistanceY | 600.0 | hole pitch 600.0mm (vertical, Ø10) |
| 5 | 1 | Radius | 5.0 | R5.0mm |
| 6 | 1 | DistanceX | 900.0 | width 900.0mm at y≈-310.2mm [unverified span] |
| 7 | 1 | DistanceX | 860.0 | width 860.0mm at y≈-282.0mm [unverified span] |
| 8 | 2 | DistanceX | 940.0 | overall width 940.0mm |
| 9 | 2 | DistanceY | 417.0 | overall height 417.0mm |
| 10 | 2 | Diameter | 6.0 | Ø6.0mm |
| 11 | 2 | Diameter | 12.0 | Ø12.0mm |
| 12 | 2 | Radius | 7.5 | 2x R7.5mm |
| 13 | 2 | Angle | 40.900000000000006 | 2x angle 40.9 deg |
| 14 | 2 | DistanceX | 874.0 | width 874.0mm at y≈169.2mm [unverified span] |
| 15 | 2 | Distance | 380.0 | hole pitch 380.0mm (2 x Ø6, from model) |
| 16 | 3 | DistanceY | 640.0 | overall height 640.0mm |
| 17 | 3 | Radius | 22.0 | 4x R22.0mm |
| 18 | 3 | Radius | 29.5 | 2x R29.5mm |
| 19 | 3 | Radius | 30.0 | 2x R30.0mm |
| 20 | 3 | Angle | 87.8 | 3x angle 87.8 deg |
| 21 | 3 | DistanceY | 130.0 | hole pitch 130.0mm (2 x Ø16, from model) |
| 22 | 5 | DistanceY | 640.0 | overall height 640.0mm |
| 23 | 5 | Diameter | 10.0 | Ø10.0mm |
| 24 | 5 | Diameter | 16.0 | 2x Ø16.0mm |
| 25 | 5 | Radius | 30.0 | 2x R30.0mm |
| 26 | 5 | Angle | 87.5 | 3x angle 87.5 deg |
| 27 | 6 | Diameter | 10.0 | 5x Ø10.0mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
