Sheet 1
OrthographicThis sheet includes 31 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 31 geometry edges from the CAD projection pipeline.
This sheet includes 86 geometry edges from the CAD projection pipeline.
This sheet includes 32 geometry edges from the CAD projection pipeline.
This sheet includes 115 geometry edges from the CAD projection pipeline.
This sheet includes 27 geometry edges from the CAD projection pipeline.
This sheet includes 92 geometry edges from the CAD projection pipeline.
This sheet includes 32 geometry edges from the CAD projection pipeline.
Sheet 6. Geometry is derived from the 3D model projection for this drawing set.
Sheet 7. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the SMA connector's threaded interface and surrounding details for accurate machining or assembly instructions.
Highlights the internal waveguide transition and ridge alignment, ensuring proper electrical performance.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Dual-Ridged Horn Antenna
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 5.0 | standard_view |
| 2 | Assembly - Top View | 5.0 | standard_view |
| 3 | Assembly - Left View | 5.0 | standard_view |
| 4 | Assembly - Isometric View | 5.0 | standard_view |
| 5 | Assembly - Front Hidden View | 5.0 | standard_view |
| 6 | Section A-A | 5.0 | section_view |
| 7 | Section B-B | 5.0 | section_view |
| 8 | Detail C | 2.0 | detail_view |
| 9 | Detail D | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.2 | A | B | C | medium | bolt/hole pattern × 4 (position) |
| profile_of_a_surface | 0.2 | A | B | C | medium | 244 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 2 | Radius | 3.8 | 4x R3.8mm | Radius ref Edge37 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 2 | — | value drifted: asked 4, measured 0.1 |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.1 | high | ||
| perpendicularity | 0.2 | A | high | |
| position | 0.2 | diameter | A | B | C | medium |
| profile_of_a_surface | 0.2 | A | B | C | medium |
All 29 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 107.2 | overall width 107.2mm |
| 2 | 1 | Angle | 64.1 | 2x angle 64.1 deg |
| 3 | 1 | DistanceY | 41.4 | height 41.4mm at x≈-52.0mm [unverified span] |
| 4 | 1 | DistanceY | 36.5 | height 36.5mm at x≈-54.0mm [unverified span] |
| 5 | 1 | DistanceY | 32.9 | height 32.9mm at x≈-50.0mm [unverified span] |
| 6 | 1 | DistanceY | 12.2 | hole pitch 12.2mm (2 x Ø2.5, from model) |
| 7 | 2 | DistanceX | 107.2 | overall width 107.2mm |
| 8 | 2 | Radius | 0.8 | 6x R0.8mm |
| 9 | 2 | Angle | 70.7 | 2x angle 70.7 deg |
| 10 | 2 | DistanceY | 41.4 | height 41.4mm at x≈-52.24657499999999mm [unverified span] |
| 11 | 3 | DistanceX | 75.0 | overall width 75.0mm |
| 12 | 3 | DistanceY | 105.0 | overall height 105.0mm |
| 13 | 3 | DistanceX | 32.5 | hole pattern width 32.5mm (4 x Ø4, from model) |
| 14 | 3 | DistanceY | 32.5 | hole pattern height 32.5mm (4 x Ø4, from model) |
| 15 | 5 | DistanceX | 107.2 | overall width 107.2mm |
| 16 | 5 | Diameter | 2.5 | 4x Ø2.5mm |
| 17 | 5 | Diameter | 2.6 | 2x Ø2.6mm |
| 18 | 5 | Diameter | 3.1 | 2x Ø3.1mm |
| 19 | 5 | DistanceY | 12.2 | hole pitch 12.2mm (vertical, Ø2) |
| 20 | 5 | DistanceY | 12.2 | hole pitch 12.2mm (vertical, Ø2.6) |
| 21 | 6 | Angle | 54.099999999999994 | 4x angle 54.1 deg |
| 22 | 6 | DistanceX | 32.5 | hole pattern width 32.5mm (4 x Ø4, from model) |
| 23 | 6 | DistanceY | 32.5 | hole pattern height 32.5mm (4 x Ø4, from model) |
| 24 | 7 | DistanceX | 75.0 | overall width 75.0mm |
| 25 | 7 | DistanceY | 107.2 | overall height 107.2mm |
| 26 | 7 | Angle | 70.7 | 2x angle 70.7 deg |
| 27 | 7 | Angle | 64.3 | angle 64.3 deg |
| 28 | 7 | DistanceX | 41.4 | width 41.4mm at y≈-52.0mm [unverified span] |
| 29 | 9 | Angle | 35.9 | 4x angle 35.9 deg |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
