Sheet 2
OrthographicThis sheet includes 105 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 105 geometry edges from the CAD projection pipeline.
This sheet includes 112 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
This sheet includes 98 geometry edges from the CAD projection pipeline.
This sheet includes 112 geometry edges from the CAD projection pipeline.
This sheet includes 107 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the motor and its mounting points, showing the detailed connection and alignment with the landing gear.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Electric Retractable Landing Gear Assembly
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 2.0 | standard_view |
| 2 | Assembly - Top View | 2.0 | standard_view |
| 3 | Assembly - Left View | 2.0 | standard_view |
| 4 | Assembly - Isometric View | 1.0 | standard_view |
| 5 | Section A-A | 2.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| profile_of_a_surface | 0.2 | A | B | C | medium | 516 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 5 | Radius | 4.0 | R4.0mm | Radius ref Edge196 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| cylindricity | 0.2 | high | ||
| circular_runout | 0.2 | A | high | |
| profile_of_a_surface | 0.2 | A | B | C | medium |
All 36 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 2 | DistanceY | 91.7 | overall height 91.7mm |
| 2 | 2 | Radius | 3.1 | 2x R3.1mm |
| 3 | 2 | Radius | 3.3 | 2x R3.3mm |
| 4 | 2 | Radius | 4.0 | 2x R4.0mm |
| 5 | 2 | Radius | 5.0 | 2x R5.0mm |
| 6 | 2 | Angle | 61.0 | 2x angle 61.0 deg |
| 7 | 2 | Angle | 27.0 | 2x angle 27.0 deg |
| 8 | 2 | DistanceY | 3.5 | hole pattern height 3.5mm (6 x Ø0.5, from model) |
| 9 | 3 | DistanceY | 248.2 | overall height 248.2mm |
| 10 | 3 | Diameter | 1.4 | Ø1.4mm |
| 11 | 3 | DistanceY | 66.5 | hole pitch 66.5mm (vertical, Ø1.2) |
| 12 | 3 | Radius | 4.7 | R4.7mm |
| 13 | 3 | Angle | 38.7 | 2x angle 38.7 deg |
| 14 | 3 | Angle | 52.1 | angle 52.1 deg |
| 15 | 3 | DistanceY | 4.5 | hole pattern height 4.5mm (7 x Ø1.2, from model) |
| 16 | 5 | Diameter | 1.4 | Ø1.4mm |
| 17 | 5 | Radius | 1.0 | R1.0mm |
| 18 | 5 | Angle | 38.7 | 2x angle 38.7 deg |
| 19 | 5 | Angle | 49.3 | angle 49.3 deg |
| 20 | 6 | Radius | 1.0 | 12x R1.0mm |
| 21 | 6 | Radius | 2.5 | R2.5mm |
| 22 | 7 | Diameter | 2.1 | Ø2.1mm |
| 23 | 7 | Diameter | 12.2 | Ø12.2mm |
| 24 | 7 | DistanceY | 66.5 | hole pitch 66.5mm (vertical, Ø1.2) |
| 25 | 7 | Radius | 5.0 | 2x R5.0mm |
| 26 | 7 | Radius | 5.1 | 2x R5.1mm |
| 27 | 7 | Angle | 71.6 | angle 71.6 deg |
| 28 | 7 | Angle | 20.0 | angle 20.0 deg |
| 29 | 7 | DistanceX | 4.4 | hole pattern width 4.4mm (7 x Ø1.2, from model) |
| 30 | 7 | DistanceY | 4.5 | hole pattern height 4.5mm (7 x Ø1.2, from model) |
| 31 | 8 | Diameter | 1.2 | 11x Ø1.2mm |
| 32 | 8 | Diameter | 6.8 | Ø6.8mm |
| 33 | 8 | Diameter | 12.2 | Ø12.2mm |
| 34 | 8 | Radius | 0.7 | 3x R0.7mm |
| 35 | 8 | Angle | 18.4 | angle 18.4 deg |
| 36 | 8 | Angle | 71.6 | angle 71.6 deg |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
