Sheet 1
OrthographicThis sheet includes 76 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 76 geometry edges from the CAD projection pipeline.
This sheet includes 36 geometry edges from the CAD projection pipeline.
This sheet includes 69 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
This sheet includes 80 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the scissor linkage pivot area to show the small diameter holes and fillets, which are critical for pin fit and structural integrity.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Modified Warbird Style Oleo Landing Gear Leg
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 1.0 | standard_view |
| 2 | Assembly - Top View | 5.0 | standard_view |
| 3 | Assembly - Left View | 1.0 | standard_view |
| 4 | Assembly - Isometric View | 1.0 | standard_view |
| 5 | Section A-A | 1.0 | section_view |
| 6 | Detail C | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.2 | A | C | low | bolt/hole pattern × 3 (position) |
| position | 0.2 | A | C | low | 3× Ø15 hole location (position) |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 3 | Radius | 3.0 | 10x R3.0mm | Radius ref Edge31 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 3 | Radius | 39.8 | 3x R39.8mm | Radius ref Edge98 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 3 | — | value drifted: asked 37.5, measured 26.7459 |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.02 | high | ||
| cylindricity | 0.2 | high | ||
| total_runout | 0.2 | B | high | |
| total_runout | 0.2 | B | high | |
| position | 0.2 | diameter | A | C | low |
| position | 0.2 | diameter | A | C | low |
All 22 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 37.0 | overall width 37.0mm |
| 2 | 1 | DistanceY | 300.0 | overall height 300.0mm |
| 3 | 1 | Radius | 4.0 | R4.0mm |
| 4 | 2 | DistanceX | 37.0 | overall width 37.0mm |
| 5 | 2 | DistanceY | 90.0 | overall height 90.0mm |
| 6 | 2 | Radius | 5.0 | 5x R5.0mm |
| 7 | 2 | DistanceX | 22.0 | width 22.0mm at y≈-24.0mm [unverified span] |
| 8 | 2 | DistanceY | 80.0 | height 80.0mm at x≈-18.0mm [unverified span] |
| 9 | 2 | DistanceY | 50.0 | height 50.0mm at x≈2.0mm [unverified span] |
| 10 | 3 | Diameter | 2.5 | 3x Ø2.5mm |
| 11 | 3 | Diameter | 5.0 | Ø5.0mm |
| 12 | 3 | Radius | 1.0 | 4x R1.0mm |
| 13 | 3 | Radius | 17.5 | 3x R17.5mm |
| 14 | 3 | Radius | 25.0 | 3x R25.0mm |
| 15 | 5 | Diameter | 2.5 | 3x Ø2.5mm |
| 16 | 5 | Diameter | 5.0 | Ø5.0mm |
| 17 | 5 | DistanceY | 37.5 | hole pitch 37.5mm (vertical, Ø2.5) |
| 18 | 5 | Radius | 1.0 | 4x R1.0mm |
| 19 | 5 | Radius | 3.0 | 13x R3.0mm |
| 20 | 6 | Radius | 5.0 | 9x R5.0mm |
| 21 | 6 | Angle | 45.0 | angle 45.0 deg |
| 22 | 6 | Angle | 26.5 | 2x angle 26.5 deg |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
