Sheet 1
OrthographicThis sheet includes 111 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 111 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
This sheet includes 108 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
This sheet includes 109 geometry edges from the CAD projection pipeline.
Magnifies the threaded shaft connection, highlighting the thread pattern and the surrounding flange.
Focuses on the bolt pattern around the flanges, providing clear detail of the hole spacing and alignment.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
F450 Quadcopter Frame
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 1.0 | standard_view |
| 2 | Assembly - Top View | 1.0 | standard_view |
| 3 | Assembly - Left View | 1.0 | standard_view |
| 4 | Assembly - Isometric View | 0.5 | standard_view |
| 5 | Section A-A | 1.0 | section_view |
| 6 | Section B-B | 1.0 | section_view |
| 7 | Detail C | 2.0 | detail_view |
| 8 | Detail D | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.15 | A | B | C | low | bolt/hole pattern × 3 (position) |
| position | 0.3 | A | B | C | low | bolt/hole pattern × 6 (position) |
| profile_of_a_surface | 0.4 | A | B | C | medium | 2672 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.2 | high | ||
| position | 0.15 | diameter | A | B | C | low |
| position | 0.3 | diameter | A | B | C | low |
| straightness | 0.3 | diameter | high | |
| profile_of_a_surface | 0.4 | A | B | C | medium |
All 35 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 818.6 | overall width 818.6mm |
| 2 | 1 | DistanceY | 354.6 | overall height 354.6mm |
| 3 | 1 | DistanceX | 44.9 | hole pitch 44.9mm (horizontal, Ø4.8) |
| 4 | 1 | Radius | 42.0 | 4x R42.0mm |
| 5 | 1 | Angle | 38.6 | 4x angle 38.6 deg |
| 6 | 1 | DistanceY | 66.0 | hole pitch 66.0mm (2 x Ø14, from model) |
| 7 | 1 | DistanceY | 229.6 | hole pitch 229.6mm (2 x Ø14, from model) |
| 8 | 1 | DistanceY | 151.0 | hole pitch 151.0mm (2 x Ø16, from model) |
| 9 | 2 | DistanceX | 818.6 | overall width 818.6mm |
| 10 | 2 | DistanceY | 400.0 | overall height 400.0mm |
| 11 | 2 | Diameter | 100.0 | Ø100.0mm |
| 12 | 2 | Diameter | 108.0 | Ø108.0mm |
| 13 | 2 | Radius | 130.0 | 2x R130.0mm |
| 14 | 2 | Radius | 150.0 | 5x R150.0mm |
| 15 | 2 | Radius | 180.0 | 2x R180.0mm |
| 16 | 2 | DistanceX | 204.5 | hole pattern width 204.5mm (4 x Ø45, from model) |
| 17 | 2 | DistanceY | 114.0 | hole pattern height 114.0mm (6 x Ø6.5, from model) |
| 18 | 3 | DistanceX | 400.0 | overall width 400.0mm |
| 19 | 3 | DistanceY | 354.6 | overall height 354.6mm |
| 20 | 3 | Radius | 0.6 | 27x R0.6mm |
| 21 | 3 | Radius | 20.0 | 7x R20.0mm |
| 22 | 3 | DistanceX | 104.0 | hole pattern width 104.0mm (6 x Ø5, from model) |
| 23 | 3 | DistanceY | 90.1 | hole pattern height 90.1mm (6 x Ø5, from model) |
| 24 | 7 | Diameter | 4.8 | 29x Ø4.8mm |
| 25 | 7 | Radius | 8.0 | R8.0mm |
| 26 | 8 | Radius | 0.7 | 2x R0.7mm |
| 27 | 9 | Diameter | 12.7 | Ø12.7mm |
| 28 | 9 | Diameter | 17.2 | Ø17.2mm |
| 29 | 9 | Diameter | 60.0 | Ø60.0mm |
| 30 | 10 | Diameter | 4.8 | 29x Ø4.8mm |
| 31 | 10 | DistanceY | 44.6 | hole pitch 44.6mm (vertical, Ø4.8) |
| 32 | 10 | Radius | 8.0 | R8.0mm |
| 33 | 10 | Radius | 20.0 | 2x R20.0mm |
| 34 | 10 | Radius | 32.0 | R32.0mm |
| 35 | 10 | Radius | 40.0 | R40.0mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
