Sheet 1
OrthographicThis sheet includes 91 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 91 geometry edges from the CAD projection pipeline.
This sheet includes 75 geometry edges from the CAD projection pipeline.
This sheet includes 106 geometry edges from the CAD projection pipeline.
This sheet includes 87 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
Magnifies the tool changer and surrounding mounting holes, which are critical for assembly and maintenance.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Fanuc Robodrill D_21LiB
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 0.2 | standard_view |
| 2 | Assembly - Top View | 0.25 | standard_view |
| 3 | Assembly - Left View | 0.2 | standard_view |
| 4 | Assembly - Isometric View | 0.2 | standard_view |
| 5 | Section A-A | 0.2 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.3 | A | B | C | medium | bolt/hole pattern × 8 (position) |
| position | 0.2 | A | B | C | low | bolt/hole pattern × 16 (position) |
| position | 0.75 | A | B | C | medium | bolt/hole pattern × 16 (position) |
| position | 0.3 | A | B | C | low | 42× Ø55 hole location (position) |
| position | 0.3 | A | B | C | low | 8× Ø50 hole location (position) |
| position | 0.3 | A | B | C | low | 8× Ø59.3 hole location (position) |
| position | 0.2 | A | B | C | low | 6× Ø15 hole location (position) |
| position | 0.3 | A | B | C | low | 4× Ø84 hole location (position) |
| profile_of_a_surface | 0.6 | A | B | C | medium | 1409 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| profile_of_a_surface | 0.6 | A | B | C | medium | largest surface (997 mm) reached by no other frame — profile locates it to the datum frame instead of leaving it to the general tolerance note |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 2 | — | value drifted: asked 840, measured 312.033 | ||
| 2 | — | value drifted: asked 1190, measured 215.43 |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.2 | high | ||
| perpendicularity | 0.4 | A | high | |
| position | 0.3 | diameter | A | B | C | medium |
| position | 0.2 | diameter | A | B | C | low |
| position | 0.75 | diameter | A | B | C | medium |
| position | 0.3 | diameter | A | B | C | low |
| position | 0.3 | diameter | A | B | C | low |
| position | 0.3 | diameter | A | B | C | low |
| position | 0.2 | diameter | A | B | C | low |
| position | 0.3 | diameter | A | B | C | low |
| profile_of_a_surface | 0.6 | A | B | C | medium | |
| profile_of_a_surface | 0.6 | A | B | C | medium |
All 25 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 2321.6 | overall width 2321.6mm |
| 2 | 1 | DistanceY | 2413.9 | overall height 2413.9mm |
| 3 | 1 | Diameter | 29.0 | 2x Ø29.0mm |
| 4 | 1 | Diameter | 40.0 | Ø40.0mm |
| 5 | 1 | DistanceX | 550.0 | hole pattern width 550.0mm (4 x Ø7, from model) |
| 6 | 1 | DistanceX | 440.0 | hole pattern width 440.0mm (4 x Ø7, from model) |
| 7 | 1 | DistanceX | 40.0 | hole pattern width 40.0mm (4 x Ø29, from model) |
| 8 | 2 | DistanceX | 2321.6 | overall width 2321.6mm |
| 9 | 2 | DistanceY | 2086.9 | overall height 2086.9mm |
| 10 | 2 | Diameter | 140.0 | 4x Ø140.0mm |
| 11 | 2 | DistanceX | 2150.0 | width 2150.0mm at y≈-313.416mm [unverified span] |
| 12 | 2 | DistanceY | 350.0 | hole pattern height 350.0mm (8 x Ø10.1, from model) |
| 13 | 2 | DistanceX | 70.0 | hole pattern width 70.0mm (4 x Ø10.1, from model) |
| 14 | 3 | DistanceX | 2086.9 | overall width 2086.9mm |
| 15 | 3 | DistanceY | 2421.4 | overall height 2421.4mm |
| 16 | 3 | Diameter | 40.0 | 3x Ø40.0mm |
| 17 | 3 | DistanceX | 315.0 | hole pitch 315.0mm (horizontal, Ø40) |
| 18 | 3 | Radius | 262.5 | 3x R262.5mm |
| 19 | 3 | Radius | 374.2 | R374.2mm |
| 20 | 3 | Radius | 474.3 | R474.3mm |
| 21 | 3 | Angle | 87.9 | 2x angle 87.9 deg |
| 22 | 3 | DistanceX | 350.0 | hole pattern width 350.0mm (4 x Ø7, from model) |
| 23 | 6 | Radius | 7.5 | R7.5mm |
| 24 | 7 | Radius | 15.0 | R15.0mm |
| 25 | 7 | Radius | 17.5 | R17.5mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
