Sheet 1
OrthographicThis sheet includes 107 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 107 geometry edges from the CAD projection pipeline.
This sheet includes 99 geometry edges from the CAD projection pipeline.
This sheet includes 93 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
This sheet includes 67 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
Sheet 4. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the blade root connection and threaded fasteners for clear representation of mating surfaces and tolerance zones.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Folding Rotor Head Assembly
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 0.17 | standard_view |
| 2 | Assembly - Top View | 0.17 | standard_view |
| 3 | Assembly - Isometric View | 0.1 | standard_view |
| 4 | Section A-A | 0.17 | section_view |
| 5 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.3 | A | B | C | low | bolt/hole pattern × 4 (position) |
| position | 1.0 | A | B | C | medium | bolt/hole pattern × 12 (position) |
| profile_of_a_surface | 0.4 | A | B | C | medium | 468 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 4 | Angle | 60.0 | 22x angle 60.0 deg | overlaps prior label (tried 9 position(s)) |
| 5 | Diameter | 12.0 | 2x Ø12.0mm | outside page band (tried 20 position(s)) |
| 1 | — | value drifted: asked 452, measured 826.253 | ||
| 1 | — | value drifted: asked 532, measured 402 | ||
| 1 | — | value drifted: asked 581.7, measured 562.251 | ||
| 4 | — | value drifted: asked 350, measured 8.50172 |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| cylindricity | 0.2 | high | ||
| position | 0.3 | diameter | A | B | C | low |
| position | 1.0 | diameter | A | B | C | medium |
| profile_of_a_surface | 0.4 | A | B | C | medium |
All 26 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 5336.1 | overall width 5336.1mm |
| 2 | 1 | DistanceY | 440.6 | overall height 440.6mm |
| 3 | 1 | Diameter | 20.0 | 2x Ø20.0mm |
| 4 | 1 | Diameter | 30.0 | 5x Ø30.0mm |
| 5 | 1 | Radius | 5.0 | 18x R5.0mm |
| 6 | 1 | Radius | 6.0 | 6x R6.0mm |
| 7 | 1 | Radius | 40.0 | 12x R40.0mm |
| 8 | 2 | DistanceX | 5336.1 | overall width 5336.1mm |
| 9 | 2 | DistanceY | 390.2 | overall height 390.2mm |
| 10 | 2 | Diameter | 2.0 | Ø2.0mm |
| 11 | 2 | Radius | 9.0 | 48x R9.0mm |
| 12 | 2 | Radius | 50.0 | 8x R50.0mm |
| 13 | 2 | Radius | 99.9 | 2x R99.9mm |
| 14 | 2 | Radius | 100.0 | 4x R100.0mm |
| 15 | 2 | Radius | 100.1 | 2x R100.1mm |
| 16 | 2 | DistanceX | 40.0 | hole pitch 40.0mm (2 x Ø20, from model) |
| 17 | 4 | Diameter | 58.0 | 4x Ø58.0mm |
| 18 | 4 | Diameter | 60.0 | 4x Ø60.0mm |
| 19 | 4 | Radius | 1.0 | 12x R1.0mm |
| 20 | 4 | Radius | 40.0 | 23x R40.0mm |
| 21 | 4 | Radius | 42.5 | 2x R42.5mm |
| 22 | 4 | Radius | 50.0 | 2x R50.0mm |
| 23 | 6 | Radius | 40.0 | 14x R40.0mm |
| 24 | 6 | Radius | 50.0 | 4x R50.0mm |
| 25 | 7 | Diameter | 12.0 | 2x Ø12.0mm |
| 26 | 7 | Radius | 1.1 | 4x R1.1mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
