Sheet 1
OrthographicThis sheet includes 107 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 107 geometry edges from the CAD projection pipeline.
This sheet includes 102 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
This sheet includes 99 geometry edges from the CAD projection pipeline.
This sheet includes 107 geometry edges from the CAD projection pipeline.
Magnifies the bolt circle pattern with four 32.4 mm diameter holes for accurate mounting.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
ESP32 FreeNove Board Pad
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 5.0 | standard_view |
| 2 | Assembly - Top View | 2.0 | standard_view |
| 3 | Assembly - Right View | 5.0 | standard_view |
| 4 | Assembly - Isometric View | 2.0 | standard_view |
| 5 | Section A-A | 5.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.3 | A | B | C | low | bolt/hole pattern × 4 (position) |
| position | 0.15 | A | B | C | low | bolt/hole pattern × 75 (position) |
| profile_of_a_surface | 0.2 | A | B | C | medium | 1149 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 1 | Diameter | 5.0 | Ø5.0mm | Diameter ref Edge289 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.1 | high | ||
| perpendicularity | 0.2 | A | high | |
| position | 0.3 | diameter | A | B | C | low |
| position | 0.15 | diameter | A | B | C | low |
| profile_of_a_surface | 0.2 | A | B | C | medium |
All 26 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 137.6 | overall width 137.6mm |
| 2 | 1 | DistanceY | 70.3 | overall height 70.3mm |
| 3 | 1 | Angle | 84.3 | 9x angle 84.3 deg |
| 4 | 1 | Angle | 59.8 | angle 59.8 deg |
| 5 | 1 | DistanceY | 48.9 | hole pitch 48.9mm (2 x Ø2, from model) |
| 6 | 2 | DistanceX | 137.6 | overall width 137.6mm |
| 7 | 2 | DistanceY | 156.0 | overall height 156.0mm |
| 8 | 2 | Diameter | 4.0 | 3x Ø4.0mm |
| 9 | 2 | Diameter | 9.0 | 3x Ø9.0mm |
| 10 | 2 | DistanceY | 17.0 | hole pitch 17.0mm (vertical, Ø4) |
| 11 | 2 | Radius | 7.0 | 2x R7.0mm |
| 12 | 2 | Angle | 40.69999999999999 | 2x angle 40.7 deg |
| 13 | 2 | Angle | 73.4 | 4x angle 73.4 deg |
| 14 | 3 | DistanceX | 156.0 | overall width 156.0mm |
| 15 | 3 | DistanceY | 70.3 | overall height 70.3mm |
| 16 | 3 | Diameter | 2.0 | 8x Ø2.0mm |
| 17 | 3 | Diameter | 3.0 | 4x Ø3.0mm |
| 18 | 3 | Angle | 79.0 | 12x angle 79.0 deg |
| 19 | 3 | Angle | 45.0 | 11x angle 45.0 deg |
| 20 | 3 | DistanceX | 80.0 | hole pattern width 80.0mm (4 x Ø3, from model) |
| 21 | 6 | Radius | 1.0 | 2x R1.0mm |
| 22 | 6 | Radius | 2.0 | 4x R2.0mm |
| 23 | 6 | Angle | 11.8 | 4x angle 11.8 deg |
| 24 | 6 | Angle | 23.4 | 4x angle 23.4 deg |
| 25 | 7 | Diameter | 2.0 | 4x Ø2.0mm |
| 26 | 7 | Diameter | 3.0 | 2x Ø3.0mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
