Sheet 1
OrthographicThis sheet includes 107 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 107 geometry edges from the CAD projection pipeline.
This sheet includes 71 geometry edges from the CAD projection pipeline.
This sheet includes 98 geometry edges from the CAD projection pipeline.
This sheet includes 89 geometry edges from the CAD projection pipeline.
This sheet includes 38 geometry edges from the CAD projection pipeline.
This sheet includes 106 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Sheet 6. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the bolt pattern and hole arrangement on the left end plate.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Go Kart Chassis
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 0.25 | standard_view |
| 2 | Assembly - Top View | 0.25 | standard_view |
| 3 | Assembly - Left View | 0.5 | standard_view |
| 4 | Assembly - Isometric View | 0.2 | standard_view |
| 5 | Section A-A | 0.25 | section_view |
| 6 | Section B-B | 0.5 | section_view |
| 7 | Detail C | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.2 | A | B | C | low | bolt/hole pattern × 3 (position) |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.1 | high | ||
| perpendicularity | 0.3 | A | high | |
| position | 0.2 | diameter | A | B | C | low |
All 34 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 2378.4 | overall width 2378.4mm |
| 2 | 1 | DistanceY | 1027.6 | overall height 1027.6mm |
| 3 | 1 | DistanceY | 1000.0 | hole pitch 1000.0mm (vertical, Ø20.5) |
| 4 | 1 | Radius | 10.2 | 2x R10.2mm |
| 5 | 1 | Radius | 10.3 | R10.3mm |
| 6 | 1 | Radius | 13.4 | 8x R13.4mm |
| 7 | 1 | Radius | 13.5 | R13.5mm |
| 8 | 1 | Angle | 51.30000000000001 | 13x angle 51.3 deg |
| 9 | 2 | DistanceX | 2378.4 | overall width 2378.4mm |
| 10 | 2 | Diameter | 20.5 | Ø20.5mm |
| 11 | 2 | Diameter | 26.9 | 2x Ø26.9mm |
| 12 | 2 | Radius | 13.4 | 3x R13.4mm |
| 13 | 2 | Angle | 85.1 | 3x angle 85.1 deg |
| 14 | 2 | Angle | 69.6 | 2x angle 69.6 deg |
| 15 | 3 | DistanceX | 921.8 | overall width 921.8mm |
| 16 | 3 | DistanceY | 1033.7 | overall height 1033.7mm |
| 17 | 3 | Radius | 13.4 | 3x R13.4mm |
| 18 | 3 | Angle | 65.1 | angle 65.1 deg |
| 19 | 3 | Angle | 77.5 | 2x angle 77.5 deg |
| 20 | 3 | DistanceY | 500.0 | hole pitch 500.0mm (2 x Ø26.9, from model) |
| 21 | 5 | DistanceY | 1028.7 | overall height 1028.7mm |
| 22 | 5 | Radius | 10.2 | 2x R10.2mm |
| 23 | 5 | Radius | 13.5 | R13.5mm |
| 24 | 5 | Angle | 69.9 | angle 69.9 deg |
| 25 | 5 | Angle | 58.0 | angle 58.0 deg |
| 26 | 5 | DistanceY | 500.0 | hole pitch 500.0mm (2 x Ø26.9, from model) |
| 27 | 6 | Diameter | 20.5 | 2x Ø20.5mm |
| 28 | 6 | Diameter | 26.9 | 2x Ø26.9mm |
| 29 | 6 | DistanceY | 500.0 | hole pitch 500.0mm (vertical, Ø20.5) |
| 30 | 6 | DistanceX | 400.0 | width 400.0mm at y≈-272.25mm [unverified span] |
| 31 | 6 | DistanceX | 26.9 | width 26.9mm at y≈-247.5mm [unverified span] |
| 32 | 6 | DistanceY | 500.0 | height 500.0mm at x≈-206.25mm [unverified span] |
| 33 | 7 | Diameter | 20.5 | 3x Ø20.5mm |
| 34 | 7 | Diameter | 26.9 | 3x Ø26.9mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
