Sheet 1
OrthographicThis sheet includes 101 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 101 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
This sheet includes 99 geometry edges from the CAD projection pipeline.
This sheet includes 80 geometry edges from the CAD projection pipeline.
This sheet includes 94 geometry edges from the CAD projection pipeline.
This sheet includes 100 geometry edges from the CAD projection pipeline.
This sheet includes 102 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
This sheet includes 101 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Sheet 6. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the threaded connection and sealing area around the pneumatic fitting on the actuator head for clarity.
Highlights the small bore and internal guide rail interface within the actuator cylinder.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
GP12_AR1440 Actuator with Gripper Assembly
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 2.0 | standard_view |
| 2 | Assembly - Top View | 5.0 | standard_view |
| 3 | Assembly - Left View | 2.0 | standard_view |
| 4 | Assembly - Isometric View | 2.0 | standard_view |
| 5 | Section A-A | 2.0 | section_view |
| 6 | Section B-B | 5.0 | section_view |
| 7 | Detail C | 2.0 | detail_view |
| 8 | Detail D | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.3 | A | C | B | medium | bolt/hole pattern × 27 (position) |
| position | 0.15 | A | C | B | low | bolt/hole pattern × 14 (position) |
| position | 0.15 | A | C | B | low | bolt/hole pattern × 11 (position) |
| position | 0.15 | A | C | B | low | bolt/hole pattern × 21 (position) |
| position | 0.15 | A | C | B | low | bolt/hole pattern × 8 (position) |
| position | 0.15 | A | C | B | low | bolt/hole pattern × 8 (position) |
| position | 0.2 | A | C | B | low | bolt/hole pattern × 4 (position) |
| position | 0.15 | A | C | B | low | bolt/hole pattern × 4 (position) |
| position | 0.2 | A | C | B | low | bolt/hole pattern × 4 (position) |
| position | 0.25 | A | C | B | medium | bolt/hole pattern × 9 (position) |
| position | 0.2 | A | C | B | medium | bolt/hole pattern × 12 (position) |
| position | 0.25 | A | C | B | medium | bolt/hole pattern × 6 (position) |
| position | 0.25 | A | C | B | medium | bolt/hole pattern × 3 (position) |
| position | 0.2 | A | C | B | medium | bolt/hole pattern × 4 (position) |
| position | 0.2 | A | C | B | medium | bolt/hole pattern × 4 (position) |
| position | 0.3 | A | C | B | medium | bolt/hole pattern × 4 (position) |
| position | 0.1 | A | C | B | medium | bolt/hole pattern × 5 (position) |
| position | 0.2 | A | C | B | medium | bolt/hole pattern × 4 (position) |
| position | 0.1 | A | C | B | medium | bolt/hole pattern × 4 (position) |
| position | 0.3 | A | C | B | medium | bolt/hole pattern × 4 (position) |
| position | 0.2 | A | C | B | medium | bolt/hole pattern × 5 (position) |
| position | 0.1 | A | C | B | low | bolt/hole pattern × 4 (position) |
| position | 0.25 | A | C | B | medium | bolt/hole pattern × 10 (position) |
| position | 0.15 | A | C | B | low | bolt/hole pattern × 6 (position) |
| position | 0.25 | A | C | B | medium | bolt/hole pattern × 5 (position) |
| position | 0.5 | A | C | B | medium | bolt/hole pattern × 3 (position) |
| position | 0.2 | A | C | B | medium | bolt/hole pattern × 9 (position) |
| position | 0.3 | A | C | B | medium | bolt/hole pattern × 5 (position) |
| position | 0.15 | A | C | B | low | bolt/hole pattern × 6 (position) |
| position | 0.2 | A | C | B | medium | 10× Ø2.9 hole location (position) |
| position | 0.25 | A | C | B | medium | 8× Ø5.2 hole location (position) |
| position | 0.15 | A | C | B | low | 8× Ø7.8 hole location (position) |
| position | 0.2 | A | C | B | medium | 6× Ø2.5 hole location (position) |
| position | 0.2 | A | C | B | medium | 6× Ø2.6 hole location (position) |
| position | 0.2 | A | C | B | low | 5× Ø12 hole location (position) |
| profile_of_a_surface | 0.2 | A | C | B | medium | 1180 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| profile_of_a_surface | 0.2 | A | C | B | medium | largest surface (47 mm) reached by no other frame — profile locates it to the datum frame instead of leaving it to the general tolerance note |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 9 | Radius | 6.2 | R6.2mm | Radius ref Edge999 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 9 | Radius | 6.3 | R6.3mm | Radius ref Edge1000 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.1 | high | ||
| position | 0.3 | diameter | A | C | B | medium |
| position | 0.15 | diameter | A | C | B | low |
| position | 0.15 | diameter | A | C | B | low |
| position | 0.15 | diameter | A | C | B | low |
| position | 0.15 | diameter | A | C | B | low |
| position | 0.15 | diameter | A | C | B | low |
| position | 0.2 | diameter | A | C | B | low |
| position | 0.15 | diameter | A | C | B | low |
| position | 0.2 | diameter | A | C | B | low |
| position | 0.25 | diameter | A | C | B | medium |
| position | 0.2 | diameter | A | C | B | medium |
| position | 0.25 | diameter | A | C | B | medium |
| position | 0.25 | diameter | A | C | B | medium |
| position | 0.2 | diameter | A | C | B | medium |
| position | 0.2 | diameter | A | C | B | medium |
| position | 0.3 | diameter | A | C | B | medium |
| position | 0.1 | diameter | A | C | B | medium |
| position | 0.2 | diameter | A | C | B | medium |
| position | 0.1 | diameter | A | C | B | medium |
| position | 0.3 | diameter | A | C | B | medium |
| position | 0.2 | diameter | A | C | B | medium |
| position | 0.1 | diameter | A | C | B | low |
| position | 0.25 | diameter | A | C | B | medium |
| position | 0.15 | diameter | A | C | B | low |
| position | 0.25 | diameter | A | C | B | medium |
| position | 0.5 | diameter | A | C | B | medium |
| position | 0.2 | diameter | A | C | B | medium |
| position | 0.3 | diameter | A | C | B | medium |
| position | 0.15 | diameter | A | C | B | low |
| position | 0.2 | diameter | A | C | B | medium |
| position | 0.25 | diameter | A | C | B | medium |
| position | 0.15 | diameter | A | C | B | low |
| position | 0.2 | diameter | A | C | B | medium |
| position | 0.2 | diameter | A | C | B | medium |
| position | 0.2 | diameter | A | C | B | low |
| profile_of_a_surface | 0.2 | A | C | B | medium | |
| profile_of_a_surface | 0.2 | A | C | B | medium |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
