Sheet 1
OrthographicThis sheet includes 117 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 117 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
This sheet includes 107 geometry edges from the CAD projection pipeline.
This sheet includes 85 geometry edges from the CAD projection pipeline.
This sheet includes 106 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the hole pattern on the top plate to clearly show the arrangement and size of the through-holes.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Grove GMK5250L Mobile Crane Assembly
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 5.0 | standard_view |
| 2 | Assembly - Top View | 10.0 | standard_view |
| 3 | Assembly - Left View | 5.0 | standard_view |
| 4 | Assembly - Isometric View | 5.0 | standard_view |
| 5 | Section A-A | 5.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| profile_of_a_surface | 0.1 | A | B | C | medium | 1457 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.05 | high | ||
| cylindricity | 0.2 | high | ||
| circularity | 0.2 | high | ||
| straightness | 0.1 | diameter | high | |
| circular_runout | 0.2 | B | high | |
| total_runout | 0.2 | B | high | |
| profile_of_a_surface | 0.1 | A | B | C | medium |
All 31 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceY | 116.8 | overall height 116.8mm |
| 2 | 1 | Diameter | 3.5 | 4x Ø3.5mm |
| 3 | 1 | Diameter | 4.3 | 6x Ø4.3mm |
| 4 | 1 | DistanceX | 21.6 | hole pitch 21.6mm (horizontal, Ø2) |
| 5 | 1 | DistanceX | 21.6 | hole pitch 21.6mm (horizontal, Ø4.3) |
| 6 | 1 | Distance | 45.3 | bolt circle Ø45.3mm (4 x Ø3.5 holes) |
| 7 | 1 | DistanceX | 32.0 | hole pattern width 32.0mm (4 x Ø3.5, from model) |
| 8 | 1 | DistanceY | 32.0 | hole pattern height 32.0mm (4 x Ø3.5, from model) |
| 9 | 1 | DistanceY | 20.0 | hole pitch 20.0mm (2 x Ø2, from model) |
| 10 | 2 | DistanceY | 30.0 | overall height 30.0mm |
| 11 | 2 | Diameter | 5.0 | Ø5.0mm |
| 12 | 2 | Diameter | 18.0 | Ø18.0mm |
| 13 | 2 | Radius | 1.5 | 5x R1.5mm |
| 14 | 2 | Angle | 46.30000000000001 | 2x angle 46.3 deg |
| 15 | 3 | DistanceY | 116.8 | overall height 116.8mm |
| 16 | 3 | Diameter | 4.0 | 3x Ø4.0mm |
| 17 | 3 | Diameter | 8.0 | Ø8.0mm |
| 18 | 3 | DistanceY | 5.8 | hole pitch 5.8mm (vertical, Ø2.5) |
| 19 | 3 | Radius | 1.0 | R1.0mm |
| 20 | 3 | Radius | 1.2 | 2x R1.2mm |
| 21 | 3 | Radius | 2.0 | 6x R2.0mm |
| 22 | 3 | Radius | 2.5 | 2x R2.5mm |
| 23 | 3 | Radius | 4.8 | 3x R4.8mm |
| 24 | 5 | DistanceY | 116.8 | overall height 116.8mm |
| 25 | 5 | Diameter | 2.5 | Ø2.5mm |
| 26 | 5 | Radius | 4.8 | R4.8mm |
| 27 | 5 | DistanceY | 113.7 | height 113.7mm at x≈8.0mm [unverified span] |
| 28 | 5 | DistanceY | 18.0 | hole pattern height 18.0mm (4 x Ø4, from model) |
| 29 | 6 | Diameter | 3.0 | 2x Ø3.0mm |
| 30 | 6 | DistanceY | 8.5 | hole pitch 8.5mm (vertical, Ø3) |
| 31 | 6 | Radius | 1.2 | 11x R1.2mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
