Sheet 1
OrthographicThis sheet includes 106 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 106 geometry edges from the CAD projection pipeline.
This sheet includes 107 geometry edges from the CAD projection pipeline.
This sheet includes 119 geometry edges from the CAD projection pipeline.
This sheet includes 99 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
This sheet includes 106 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the central bore and surrounding bolt pattern on the flywheel for clarity.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Horizontal Engine Assembly
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 2.0 | standard_view |
| 2 | Assembly - Top View | 2.0 | standard_view |
| 3 | Assembly - Isometric View | 2.0 | standard_view |
| 4 | Assembly - Front Hidden View | 2.0 | standard_view |
| 5 | Section A-A | 2.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.15 | C | B | A | low | bolt/hole pattern × 3 (position) |
| position | 0.15 | C | B | A | low | bolt/hole pattern × 18 (position) |
| position | 0.2 | C | B | A | low | bolt/hole pattern × 6 (position) |
| position | 0.15 | C | B | A | low | bolt/hole pattern × 4 (position) |
| position | 0.3 | C | B | A | low | bolt/hole pattern × 5 (position) |
| position | 0.3 | C | B | A | low | bolt/hole pattern × 4 (position) |
| position | 1.0 | C | B | A | medium | bolt/hole pattern × 3 (position) |
| position | 0.15 | C | B | A | low | bolt/hole pattern × 3 (position) |
| position | 0.3 | C | B | A | low | bolt/hole pattern × 8 (position) |
| position | 0.2 | C | B | A | medium | bolt/hole pattern × 4 (position) |
| position | 0.2 | C | B | A | medium | bolt/hole pattern × 4 (position) |
| position | 0.2 | C | B | A | low | bolt/hole pattern × 10 (position) |
| position | 0.3 | C | B | A | low | bolt/hole pattern × 4 (position) |
| position | 0.15 | C | B | A | low | bolt/hole pattern × 4 (position) |
| position | 0.3 | C | B | A | low | bolt/hole pattern × 10 (position) |
| position | 0.2 | C | B | A | low | bolt/hole pattern × 4 (position) |
| position | 0.3 | C | B | A | medium | bolt/hole pattern × 4 (position) |
| position | 0.1 | C | B | A | medium | bolt/hole pattern × 4 (position) |
| position | 0.25 | C | B | A | medium | bolt/hole pattern × 12 (position) |
| position | 1.5 | C | B | A | medium | bolt/hole pattern × 4 (position) |
| position | 1.0 | C | B | A | medium | 5× Ø24 hole location (position) |
| position | 0.2 | C | B | A | low | 4× Ø14.4 hole location (position) |
| position | 0.75 | C | B | A | medium | 4× Ø13.6 hole location (position) |
| position | 0.2 | C | B | A | low | 4× Ø10.4 hole location (position) |
| position | 0.25 | C | B | A | medium | 4× Ø4.13 hole location (position) |
| position | 0.2 | C | B | A | low | 4× Ø12 hole location (position) |
| profile_of_a_surface | 0.2 | C | B | A | low | 635 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| profile_of_a_surface | 0.2 | C | B | A | medium | largest surface (39 mm) reached by no other frame — profile locates it to the datum frame instead of leaving it to the general tolerance note |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 1 | Radius | 68.0 | 4x R68.0mm | overlaps prior label (tried 10 position(s)) |
| 5 | Radius | 0.6 | R0.6mm | refs off printable area |
| 5 | Radius | 1.5 | R1.5mm | refs off printable area |
| 5 | — | value drifted: asked 0.5, measured 0.999967 | ||
| 5 | — | value drifted: asked 35, measured 63.2818 |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.05 | high | ||
| perpendicularity | 0.2 | C | high | |
| position | 0.15 | diameter | C | B | A | low |
| position | 0.15 | diameter | C | B | A | low |
| position | 0.2 | diameter | C | B | A | low |
| position | 0.15 | diameter | C | B | A | low |
| position | 0.3 | diameter | C | B | A | low |
| position | 0.3 | diameter | C | B | A | low |
| position | 1.0 | diameter | C | B | A | medium |
| position | 0.15 | diameter | C | B | A | low |
| position | 0.3 | diameter | C | B | A | low |
| position | 0.2 | diameter | C | B | A | medium |
| position | 0.2 | diameter | C | B | A | medium |
| position | 0.2 | diameter | C | B | A | low |
| position | 0.3 | diameter | C | B | A | low |
| position | 0.15 | diameter | C | B | A | low |
| position | 0.3 | diameter | C | B | A | low |
| position | 0.2 | diameter | C | B | A | low |
| position | 0.3 | diameter | C | B | A | medium |
| position | 0.1 | diameter | C | B | A | medium |
| position | 0.25 | diameter | C | B | A | medium |
| position | 1.5 | diameter | C | B | A | medium |
| position | 1.0 | diameter | C | B | A | medium |
| position | 0.2 | diameter | C | B | A | low |
| position | 0.75 | diameter | C | B | A | medium |
| position | 0.2 | diameter | C | B | A | low |
| position | 0.25 | diameter | C | B | A | medium |
| position | 0.2 | diameter | C | B | A | low |
| cylindricity | 0.2 | high | ||
| circularity | 0.2 | high | ||
| straightness | 0.1 | diameter | high | |
| profile_of_a_surface | 0.2 | C | B | A | low | |
| profile_of_a_surface | 0.2 | C | B | A | medium |
All 36 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 251.4 | overall width 251.4mm |
| 2 | 1 | Radius | 67.6 | R67.6mm |
| 3 | 1 | Radius | 67.9 | R67.9mm |
| 4 | 1 | Angle | 81.1 | 2x angle 81.1 deg |
| 5 | 1 | DistanceX | 32.3 | hole pattern width 32.3mm (4 x Ø4, from model) |
| 6 | 1 | DistanceY | 30.3 | hole pattern height 30.3mm (4 x Ø4, from model) |
| 7 | 1 | DistanceX | 14.1 | hole pattern width 14.1mm (4 x Ø3, from model) |
| 8 | 2 | DistanceX | 251.4 | overall width 251.4mm |
| 9 | 2 | DistanceY | 124.1 | overall height 124.1mm |
| 10 | 2 | Radius | 7.9 | 2x R7.9mm |
| 11 | 2 | DistanceY | 52.0 | hole pitch 52.0mm (2 x Ø5, from model) |
| 12 | 2 | DistanceY | 40.0 | hole pitch 40.0mm (2 x Ø4, from model) |
| 13 | 2 | DistanceX | 26.0 | hole pattern width 26.0mm (4 x Ø4, from model) |
| 14 | 2 | DistanceY | 50.1 | hole pattern height 50.1mm (4 x Ø4, from model) |
| 15 | 2 | DistanceX | 42.0 | hole pitch 42.0mm (2 x Ø4, from model) |
| 16 | 4 | DistanceX | 251.4 | overall width 251.4mm |
| 17 | 4 | Radius | 10.0 | 16x R10.0mm |
| 18 | 4 | Angle | 81.1 | 5x angle 81.1 deg |
| 19 | 4 | Angle | 50.69999999999999 | 4x angle 50.7 deg |
| 20 | 6 | Radius | 9.9 | 3x R9.9mm |
| 21 | 6 | Radius | 10.1 | R10.1mm |
| 22 | 6 | DistanceY | 11.2 | hole pattern height 11.2mm (4 x Ø3, from model) |
| 23 | 6 | DistanceY | 11.0 | hole pitch 11.0mm (2 x Ø5, from model) |
| 24 | 7 | Radius | 9.9 | 3x R9.9mm |
| 25 | 7 | Radius | 10.1 | R10.1mm |
| 26 | 7 | DistanceX | 32.3 | hole pattern width 32.3mm (4 x Ø4, from model) |
| 27 | 7 | DistanceY | 30.3 | hole pattern height 30.3mm (4 x Ø4, from model) |
| 28 | 7 | DistanceX | 14.1 | hole pattern width 14.1mm (4 x Ø3, from model) |
| 29 | 7 | DistanceY | 11.2 | hole pattern height 11.2mm (4 x Ø3, from model) |
| 30 | 7 | DistanceY | 11.0 | hole pitch 11.0mm (2 x Ø5, from model) |
| 31 | 8 | Diameter | 10.0 | 4x Ø10.0mm |
| 32 | 8 | Radius | 2.4 | R2.4mm |
| 33 | 8 | Radius | 2.5 | 3x R2.5mm |
| 34 | 8 | Radius | 3.9 | 2x R3.9mm |
| 35 | 8 | Radius | 4.0 | 2x R4.0mm |
| 36 | 8 | Radius | 7.0 | 4x R7.0mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
