Sheet 1
OrthographicThis sheet includes 131 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 131 geometry edges from the CAD projection pipeline.
This sheet includes 106 geometry edges from the CAD projection pipeline.
This sheet includes 106 geometry edges from the CAD projection pipeline.
This sheet includes 110 geometry edges from the CAD projection pipeline.
This sheet includes 114 geometry edges from the CAD projection pipeline.
Magnifies the complex hole pattern on the side arm, critical for precise fastener placement.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Hybrid Drone Frame Assembly
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 2.0 | standard_view |
| 2 | Assembly - Top View | 2.0 | standard_view |
| 3 | Assembly - Left View | 2.0 | standard_view |
| 4 | Assembly - Isometric View | 2.0 | standard_view |
| 5 | Section A-A | 2.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.2 | A | B | C | medium | bolt/hole pattern × 51 (position) |
| profile_of_a_surface | 0.2 | A | B | C | medium | 1178 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 1 | DistanceY | 34.0 | hole pitch 34.0mm (vertical, Ø3.2) | outside page band (tried 16 position(s)) |
| 1 | DistanceX | 237.9 | hole pitch 237.9mm (horizontal, Ø9) | outside page band (tried 16 position(s)) |
| 1 | DistanceY | 268.1 | overall height 268.1mm | outside page band (tried 17 position(s)) |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.1 | high | ||
| position | 0.2 | diameter | A | B | C | medium |
| profile_of_a_surface | 0.2 | A | B | C | medium |
All 28 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | Diameter | 3.0 | 10x Ø3.0mm |
| 2 | 1 | Diameter | 3.2 | 2x Ø3.2mm |
| 3 | 1 | DistanceY | 18.4 | hole pitch 18.4mm (vertical, Ø3) |
| 4 | 1 | Radius | 12.0 | 6x R12.0mm |
| 5 | 1 | Radius | 12.2 | 8x R12.2mm |
| 6 | 1 | Angle | 85.1 | 4x angle 85.1 deg |
| 7 | 1 | Angle | 29.5 | 6x angle 29.5 deg |
| 8 | 2 | Diameter | 24.0 | 2x Ø24.0mm |
| 9 | 2 | DistanceX | 97.7 | hole pitch 97.7mm (horizontal, Ø24) |
| 10 | 2 | Radius | 1.0 | 2x R1.0mm |
| 11 | 2 | Radius | 2.0 | R2.0mm |
| 12 | 2 | Radius | 5.0 | 2x R5.0mm |
| 13 | 2 | Radius | 14.0 | 4x R14.0mm |
| 14 | 3 | DistanceX | 105.4 | overall width 105.4mm |
| 15 | 3 | DistanceY | 268.1 | overall height 268.1mm |
| 16 | 3 | Radius | 12.2 | 4x R12.2mm |
| 17 | 3 | Angle | 62.5 | 2x angle 62.5 deg |
| 18 | 3 | Angle | 85.2 | 3x angle 85.2 deg |
| 19 | 6 | Diameter | 2.0 | 8x Ø2.0mm |
| 20 | 6 | Diameter | 2.5 | 8x Ø2.5mm |
| 21 | 6 | DistanceX | 10.2 | hole pitch 10.2mm (horizontal, Ø2.5) |
| 22 | 6 | DistanceX | 16.0 | hole pitch 16.0mm (horizontal, Ø2) |
| 23 | 6 | Radius | 1.6 | 24x R1.6mm |
| 24 | 7 | Diameter | 2.0 | 8x Ø2.0mm |
| 25 | 7 | Diameter | 2.5 | 8x Ø2.5mm |
| 26 | 7 | DistanceX | 10.2 | hole pitch 10.2mm (horizontal, Ø2.5) |
| 27 | 7 | Angle | 26.80000000000001 | 4x angle 26.8 deg |
| 28 | 7 | Angle | 36.4 | 4x angle 36.4 deg |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
