Sheet 1
OrthographicThis sheet includes 102 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 102 geometry edges from the CAD projection pipeline.
This sheet includes 85 geometry edges from the CAD projection pipeline.
This sheet includes 86 geometry edges from the CAD projection pipeline.
This sheet includes 101 geometry edges from the CAD projection pipeline.
This sheet includes 83 geometry edges from the CAD projection pipeline.
This sheet includes 88 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the junction where the fuel line connects to the main manifold, showing the fitting type and sealing area.
Highlights the threaded port on the top cover used for refueling or pressure monitoring.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Hybrid VTOL UAV Fuel and Battery Compartment
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 1.0 | standard_view |
| 2 | Assembly - Top View | 2.0 | standard_view |
| 3 | Assembly - Left View | 1.0 | standard_view |
| 4 | Assembly - Isometric View | 1.0 | standard_view |
| 5 | Section A-A | 1.0 | section_view |
| 6 | Section B-B | 2.0 | section_view |
| 7 | Detail C | 2.0 | detail_view |
| 8 | Detail D | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 1.5 | A | C | B | medium | bolt/hole pattern × 3 (position) |
| profile_of_a_surface | 0.4 | A | C | B | medium | 338 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 1 | Radius | 3.0 | 4x R3.0mm | Radius ref Edge25 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 1 | Angle | 15.0 | 5x angle 15.0 deg | overlaps prior label (tried 9 position(s)) |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.2 | high | ||
| position | 1.5 | diameter | A | C | B | medium |
| profile_of_a_surface | 0.4 | A | C | B | medium |
All 28 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 236.0 | overall width 236.0mm |
| 2 | 1 | DistanceY | 456.1 | overall height 456.1mm |
| 3 | 1 | Diameter | 7.0 | Ø7.0mm |
| 4 | 1 | Radius | 5.0 | 10x R5.0mm |
| 5 | 1 | Radius | 8.0 | 2x R8.0mm |
| 6 | 1 | Radius | 25.0 | 6x R25.0mm |
| 7 | 1 | Angle | 75.0 | 4x angle 75.0 deg |
| 8 | 2 | DistanceX | 236.0 | overall width 236.0mm |
| 9 | 2 | DistanceY | 187.5 | overall height 187.5mm |
| 10 | 2 | Radius | 3.0 | 10x R3.0mm |
| 11 | 2 | Radius | 5.0 | 4x R5.0mm |
| 12 | 2 | Radius | 8.0 | 2x R8.0mm |
| 13 | 2 | Angle | 80.0 | 2x angle 80.0 deg |
| 14 | 2 | Angle | 45.0 | 2x angle 45.0 deg |
| 15 | 3 | DistanceY | 456.1 | overall height 456.1mm |
| 16 | 3 | Radius | 2.5 | R2.5mm |
| 17 | 3 | Radius | 3.0 | 7x R3.0mm |
| 18 | 3 | Angle | 87.3 | 2x angle 87.3 deg |
| 19 | 3 | Angle | 68.9 | 4x angle 68.9 deg |
| 20 | 5 | DistanceY | 456.1 | overall height 456.1mm |
| 21 | 5 | Radius | 8.0 | R8.0mm |
| 22 | 5 | Radius | 150.0 | 2x R150.0mm |
| 23 | 5 | Angle | 87.3 | 2x angle 87.3 deg |
| 24 | 5 | Angle | 68.9 | 4x angle 68.9 deg |
| 25 | 7 | Radius | 1.5 | R1.5mm |
| 26 | 8 | Diameter | 4.6 | Ø4.6mm |
| 27 | 8 | Diameter | 5.0 | Ø5.0mm |
| 28 | 8 | Diameter | 8.0 | Ø8.0mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
