Sheet 1
OrthographicThis sheet includes 67 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 67 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
This sheet includes 109 geometry edges from the CAD projection pipeline.
This sheet includes 51 geometry edges from the CAD projection pipeline.
This sheet includes 64 geometry edges from the CAD projection pipeline.
This sheet includes 106 geometry edges from the CAD projection pipeline.
Magnifies the central sensor assembly to clearly show the four mounting holes and their precise alignment within the housing.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
GUVA-S12SD UV Sensor Module Assembly
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 2.0 | standard_view |
| 2 | Assembly - Top View | 2.0 | standard_view |
| 3 | Assembly - Left View | 2.0 | standard_view |
| 4 | Assembly - Isometric View | 2.0 | standard_view |
| 5 | Section A-A | 2.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.15 | A | B | C | low | bolt/hole pattern × 4 (position) |
| position | 0.3 | A | B | C | medium | bolt/hole pattern × 6 (position) |
| profile_of_a_surface | 0.2 | A | B | C | medium | 2727 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 7 | — | value drifted: asked 42, measured 36.3731 |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.1 | high | ||
| position | 0.15 | diameter | A | B | C | low |
| position | 0.3 | diameter | A | B | C | medium |
| cylindricity | 0.2 | high | ||
| circularity | 0.2 | high | ||
| straightness | 0.1 | diameter | high | |
| profile_of_a_surface | 0.2 | A | B | C | medium |
All 35 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | Radius | 3.0 | 4x R3.0mm |
| 2 | 1 | Angle | 20.3 | angle 20.3 deg |
| 3 | 1 | Angle | 75.8 | angle 75.8 deg |
| 4 | 1 | DistanceX | 12.8 | hole pattern width 12.8mm (8 x Ø4.3, from model) |
| 5 | 1 | DistanceX | 34.2 | hole pattern width 34.2mm (3 x Ø2.8, from model) |
| 6 | 1 | DistanceY | 35.8 | hole pattern height 35.8mm (3 x Ø2.8, from model) |
| 7 | 2 | DistanceY | 171.1 | overall height 171.1mm |
| 8 | 2 | DistanceY | 93.8 | hole pitch 93.8mm (2 x Ø1.5, from model) |
| 9 | 3 | DistanceX | 171.1 | overall width 171.1mm |
| 10 | 3 | DistanceY | 133.3 | overall height 133.3mm |
| 11 | 3 | Diameter | 3.0 | 10x Ø3.0mm |
| 12 | 3 | Diameter | 3.5 | 10x Ø3.5mm |
| 13 | 3 | DistanceX | 11.9 | hole pitch 11.9mm (horizontal, Ø3) |
| 14 | 3 | DistanceY | 45.5 | hole pitch 45.5mm (vertical, Ø3) |
| 15 | 3 | Radius | 4.4 | R4.4mm |
| 16 | 3 | Radius | 6.0 | 4x R6.0mm |
| 17 | 3 | Radius | 11.5 | 4x R11.5mm |
| 18 | 3 | DistanceX | 93.8 | hole pitch 93.8mm (2 x Ø1.5, from model) |
| 19 | 6 | Diameter | 4.2 | 5x Ø4.2mm |
| 20 | 6 | DistanceY | 7.5 | hole pitch 7.5mm (vertical, Ø4.2) |
| 21 | 6 | DistanceX | 11.3 | hole pitch 11.3mm (horizontal, Ø4.2) |
| 22 | 6 | Distance | 10.0 | hole pitch 10.0mm (2 x Ø2, from model) |
| 23 | 6 | DistanceY | 8.2 | hole pattern height 8.2mm (6 x Ø2, from model) |
| 24 | 6 | Distance | 16.0 | hole pitch 16.0mm (2 x Ø3.4, from model) |
| 25 | 7 | Diameter | 2.2 | 2x Ø2.2mm |
| 26 | 7 | Diameter | 5.3 | 2x Ø5.3mm |
| 27 | 7 | Distance | 14.1 | bolt circle Ø14.1mm (4 x Ø2.9 holes) |
| 28 | 7 | Radius | 13.7 | 2x R13.7mm |
| 29 | 7 | Radius | 14.2 | 2x R14.2mm |
| 30 | 8 | Radius | 0.5 | R0.5mm |
| 31 | 8 | Radius | 0.8 | R0.8mm |
| 32 | 8 | Radius | 1.9 | 5x R1.9mm |
| 33 | 8 | Radius | 2.0 | 6x R2.0mm |
| 34 | 8 | Radius | 3.1 | 2x R3.1mm |
| 35 | 8 | Radius | 3.4 | 2x R3.4mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
