Sheet 1
OrthographicThis sheet includes 121 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 121 geometry edges from the CAD projection pipeline.
This sheet includes 86 geometry edges from the CAD projection pipeline.
This sheet includes 137 geometry edges from the CAD projection pipeline.
This sheet includes 115 geometry edges from the CAD projection pipeline.
This sheet includes 106 geometry edges from the CAD projection pipeline.
This sheet includes 107 geometry edges from the CAD projection pipeline.
This sheet includes 106 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies a small critical feature, such as a bore or hole pattern, that is too small to see clearly in the standard views.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
ISUZU P75 F5.2 CC 190 CV Assembly
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 0.1 | standard_view |
| 2 | Assembly - Top View | 0.25 | standard_view |
| 3 | Assembly - Left View | 0.1 | standard_view |
| 4 | Assembly - Isometric View | 0.1 | standard_view |
| 5 | Section A-A | 0.1 | section_view |
| 6 | Detail C | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.3 | A | B | C | low | bolt/hole pattern × 36 (position) |
| position | 0.1 | A | B | C | low | bolt/hole pattern × 12 (position) |
| position | 1.0 | A | B | C | medium | bolt/hole pattern × 24 (position) |
| position | 1.0 | A | B | C | medium | bolt/hole pattern × 12 (position) |
| position | 0.25 | A | B | C | medium | bolt/hole pattern × 12 (position) |
| position | 0.3 | A | B | C | low | bolt/hole pattern × 12 (position) |
| position | 0.15 | A | B | C | low | bolt/hole pattern × 4 (position) |
| position | 0.15 | A | B | C | low | bolt/hole pattern × 4 (position) |
| position | 0.2 | A | B | C | low | bolt/hole pattern × 22 (position) |
| position | 0.2 | A | B | C | low | bolt/hole pattern × 4 (position) |
| position | 0.2 | A | B | C | low | bolt/hole pattern × 6 (position) |
| position | 0.5 | A | B | C | low | bolt/hole pattern × 5 (position) |
| position | 0.5 | A | B | C | low | bolt/hole pattern × 4 (position) |
| position | 0.5 | A | B | C | low | bolt/hole pattern × 42 (position) |
| position | 0.5 | A | B | C | low | bolt/hole pattern × 42 (position) |
| position | 0.5 | A | B | C | low | bolt/hole pattern × 6 (position) |
| position | 0.5 | A | B | C | low | bolt/hole pattern × 6 (position) |
| position | 0.5 | A | B | C | low | bolt/hole pattern × 6 (position) |
| position | 0.5 | A | B | C | low | bolt/hole pattern × 12 (position) |
| position | 0.2 | A | B | C | low | bolt/hole pattern × 36 (position) |
| position | 0.5 | A | B | C | low | bolt/hole pattern × 7 (position) |
| position | 0.3 | A | B | C | low | bolt/hole pattern × 3 (position) |
| position | 0.5 | A | B | C | low | 4× Ø150 hole location (position) |
| position | 0.5 | A | B | C | low | 4× Ø444.5 hole location (position) |
| position | 0.5 | A | B | C | low | 3× Ø300 hole location (position) |
| position | 0.5 | A | B | C | medium | 2× Ø9 hole location (position) |
| position | 0.5 | A | B | C | low | 2× Ø250 hole location (position) |
| position | 0.3 | A | B | C | low | 2× Ø70 hole location (position) |
| profile_of_a_surface | 0.8 | A | B | C | medium | 1904 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 3 | — | value drifted: asked 680, measured 3194.25 | ||
| 3 | — | value drifted: asked 1005, measured 2000 |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.3 | high | ||
| perpendicularity | 0.3 | A | high | |
| position | 0.3 | diameter | A | B | C | low |
| position | 0.1 | diameter | A | B | C | low |
| position | 1.0 | diameter | A | B | C | medium |
| position | 1.0 | diameter | A | B | C | medium |
| position | 0.25 | diameter | A | B | C | medium |
| position | 0.3 | diameter | A | B | C | low |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.15 | diameter | A | B | C | low |
| position | 0.2 | diameter | A | B | C | low |
| position | 0.2 | diameter | A | B | C | low |
| position | 0.2 | diameter | A | B | C | low |
| position | 0.5 | diameter | A | B | C | low |
| position | 0.5 | diameter | A | B | C | low |
| position | 0.5 | diameter | A | B | C | low |
| position | 0.5 | diameter | A | B | C | low |
| position | 0.5 | diameter | A | B | C | low |
| position | 0.5 | diameter | A | B | C | low |
| position | 0.5 | diameter | A | B | C | low |
| position | 0.5 | diameter | A | B | C | low |
| position | 0.2 | diameter | A | B | C | low |
| position | 0.5 | diameter | A | B | C | low |
| position | 0.3 | diameter | A | B | C | low |
| position | 0.5 | diameter | A | B | C | low |
| position | 0.5 | diameter | A | B | C | low |
| position | 0.5 | diameter | A | B | C | low |
| position | 0.5 | diameter | A | B | C | medium |
| position | 0.5 | diameter | A | B | C | low |
| position | 0.3 | diameter | A | B | C | low |
| cylindricity | 0.2 | high | ||
| circularity | 0.2 | high | ||
| straightness | 0.4 | diameter | high | |
| profile_of_a_surface | 0.8 | A | B | C | medium |
All 39 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 2115.0 | overall width 2115.0mm |
| 2 | 1 | DistanceY | 5542.0 | overall height 5542.0mm |
| 3 | 1 | Diameter | 27.0 | 6x Ø27.0mm |
| 4 | 1 | Diameter | 80.0 | 9x Ø80.0mm |
| 5 | 1 | DistanceX | 113.1 | hole pitch 113.1mm (horizontal, Ø80) |
| 6 | 1 | DistanceY | 113.1 | hole pitch 113.1mm (vertical, Ø80) |
| 7 | 1 | DistanceY | 129.9 | hole pitch 129.9mm (vertical, Ø27) |
| 8 | 1 | Radius | 30.0 | 2x R30.0mm |
| 9 | 1 | Radius | 32.5 | 2x R32.5mm |
| 10 | 1 | Radius | 50.0 | 6x R50.0mm |
| 11 | 2 | DistanceX | 2115.0 | overall width 2115.0mm |
| 12 | 2 | DistanceY | 2265.0 | overall height 2265.0mm |
| 13 | 2 | Radius | 200.0 | 2x R200.0mm |
| 14 | 2 | Radius | 250.0 | R250.0mm |
| 15 | 2 | DistanceX | 404.0 | hole pattern width 404.0mm (4 x Ø10, from model) |
| 16 | 2 | DistanceX | 202.0 | hole pattern width 202.0mm (4 x Ø8, from model) |
| 17 | 2 | DistanceY | 200.0 | hole pitch 200.0mm (2 x Ø100, from model) |
| 18 | 2 | Distance | 270.0 | hole pitch 270.0mm (2 x Ø100, from model) |
| 19 | 3 | DistanceY | 5542.0 | overall height 5542.0mm |
| 20 | 3 | Diameter | 9.0 | Ø9.0mm |
| 21 | 3 | Diameter | 10.5 | 7x Ø10.5mm |
| 22 | 3 | DistanceX | 113.1 | hole pitch 113.1mm (horizontal, Ø80) |
| 23 | 3 | DistanceX | 149.6 | hole pitch 149.6mm (horizontal, Ø5.4) |
| 24 | 3 | DistanceY | 2765.0 | hole pitch 2765.0mm (vertical, Ø444.5) |
| 25 | 5 | DistanceY | 5542.0 | overall height 5542.0mm |
| 26 | 5 | Diameter | 10.0 | 3x Ø10.0mm |
| 27 | 5 | Diameter | 10.5 | 9x Ø10.5mm |
| 28 | 5 | DistanceY | 240.0 | hole pitch 240.0mm (vertical, Ø10.5) |
| 29 | 5 | DistanceY | 960.0 | hole pitch 960.0mm (vertical, Ø10) |
| 30 | 5 | Radius | 50.0 | 4x R50.0mm |
| 31 | 5 | Radius | 70.0 | 6x R70.0mm |
| 32 | 5 | Radius | 75.0 | 3x R75.0mm |
| 33 | 5 | Radius | 80.0 | 3x R80.0mm |
| 34 | 5 | Radius | 100.0 | 2x R100.0mm |
| 35 | 6 | Radius | 3.0 | 12x R3.0mm |
| 36 | 7 | Diameter | 5.4 | 12x Ø5.4mm |
| 37 | 7 | Diameter | 36.5 | 12x Ø36.5mm |
| 38 | 8 | Radius | 5.8 | 18x R5.8mm |
| 39 | 8 | Radius | 29.0 | 16x R29.0mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
