Sheet 1
OrthographicThis sheet includes 77 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 77 geometry edges from the CAD projection pipeline.
This sheet includes 69 geometry edges from the CAD projection pipeline.
This sheet includes 74 geometry edges from the CAD projection pipeline.
This sheet includes 29 geometry edges from the CAD projection pipeline.
This sheet includes 74 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the internal bore and piston mechanism, providing a clear view of the critical internal features.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Pneumatic Retract Unit for Giant Scale RC Planes
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 5.0 | standard_view |
| 2 | Assembly - Top View | 5.0 | standard_view |
| 3 | Assembly - Left View | 10.0 | standard_view |
| 4 | Assembly - Isometric View | 5.0 | standard_view |
| 5 | Section A-A | 5.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.15 | A | B | C | low | bolt/hole pattern × 6 (position) |
| position | 0.2 | A | B | C | medium | bolt/hole pattern × 16 (position) |
| profile_of_a_surface | 0.2 | A | B | C | low | 94 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 1 | Angle | 87.7 | angle 87.7 deg | overlaps prior label (tried 9 position(s)) |
| 6 | Radius | 3.0 | 8x R3.0mm | Radius ref Edge4 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.1 | high | ||
| position | 0.15 | diameter | A | B | C | low |
| position | 0.2 | diameter | A | B | C | medium |
| profile_of_a_surface | 0.2 | A | B | C | low |
All 30 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 115.1 | overall width 115.1mm |
| 2 | 1 | DistanceY | 47.8 | overall height 47.8mm |
| 3 | 1 | Diameter | 3.5 | Ø3.5mm |
| 4 | 1 | Diameter | 7.5 | Ø7.5mm |
| 5 | 1 | DistanceY | 23.0 | hole pitch 23.0mm (vertical, Ø3) |
| 6 | 1 | Radius | 4.0 | 4x R4.0mm |
| 7 | 1 | Angle | 3.4000000000000057 | angle 3.4 deg |
| 8 | 1 | DistanceX | 45.0 | hole pattern width 45.0mm (4 x Ø3, from model) |
| 9 | 2 | DistanceX | 115.0 | overall width 115.0mm |
| 10 | 2 | DistanceY | 53.4 | overall height 53.4mm |
| 11 | 2 | Diameter | 4.0 | 4x Ø4.0mm |
| 12 | 2 | Distance | 58.3 | bolt circle Ø58.3mm (4 x Ø4 holes) |
| 13 | 2 | DistanceX | 114.0 | width 114.0mm at y≈-10.0mm [unverified span] |
| 14 | 2 | DistanceX | 40.0 | hole pattern width 40.0mm (4 x Ø4, from model) |
| 15 | 3 | DistanceX | 53.4 | overall width 53.4mm |
| 16 | 3 | DistanceY | 47.8 | overall height 47.8mm |
| 17 | 3 | Radius | 1.8 | 3x R1.8mm |
| 18 | 3 | Radius | 2.0 | 5x R2.0mm |
| 19 | 3 | Radius | 3.0 | 2x R3.0mm |
| 20 | 3 | DistanceY | 47.3 | height 47.3mm at x≈0.0mm [unverified span] |
| 21 | 3 | DistanceY | 36.8 | height 36.8mm at x≈-8.0mm [unverified span] |
| 22 | 3 | DistanceY | 34.0 | height 34.0mm at x≈-10.0mm [unverified span] |
| 23 | 5 | DistanceX | 18.0 | width 18.0mm at y≈0.0mm [unverified span] |
| 24 | 5 | DistanceX | 17.6 | width 17.6mm at y≈2.0mm [unverified span] |
| 25 | 5 | DistanceY | 2.5 | height 2.5mm at x≈-8.0mm [unverified span] |
| 26 | 6 | Diameter | 3.0 | 4x Ø3.0mm |
| 27 | 6 | Diameter | 6.0 | 6x Ø6.0mm |
| 28 | 6 | Diameter | 8.0 | Ø8.0mm |
| 29 | 6 | DistanceX | 22.0 | hole pitch 22.0mm (horizontal, Ø6) |
| 30 | 6 | Angle | 44.5 | 2x angle 44.5 deg |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
