Sheet 1
OrthographicThis sheet includes 100 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 100 geometry edges from the CAD projection pipeline.
This sheet includes 84 geometry edges from the CAD projection pipeline.
This sheet includes 109 geometry edges from the CAD projection pipeline.
This sheet includes 114 geometry edges from the CAD projection pipeline.
This sheet includes 106 geometry edges from the CAD projection pipeline.
This sheet includes 106 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the warning label and terminal block for clarity.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Closed-loop stepper motor NEMA 23
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 5.0 | standard_view |
| 2 | Assembly - Top View | 5.0 | standard_view |
| 3 | Assembly - Left View | 5.0 | standard_view |
| 4 | Assembly - Isometric View | 5.0 | standard_view |
| 5 | Section A-A | 5.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.2 | A | B | C | medium | bolt/hole pattern × 28 (position) |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 5 | Diameter | 3.0 | 4x Ø3.0mm | Diameter ref Edge407 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 5 | — | value drifted: asked 59, measured 32.5263 | ||
| 5 | — | value drifted: asked 59, measured 25.8839 |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.1 | high | ||
| perpendicularity | 0.2 | A | high | |
| position | 0.2 | diameter | A | B | C | medium |
| cylindricity | 0.2 | high | ||
| straightness | 0.1 | diameter | high | |
| total_runout | 0.2 | C | high |
All 39 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 116.3 | overall width 116.3mm |
| 2 | 1 | DistanceY | 68.5 | overall height 68.5mm |
| 3 | 1 | Radius | 5.0 | 12x R5.0mm |
| 4 | 1 | Angle | 71.6 | angle 71.6 deg |
| 5 | 1 | Angle | 60.0 | 2x angle 60.0 deg |
| 6 | 2 | DistanceX | 116.3 | overall width 116.3mm |
| 7 | 2 | DistanceY | 56.4 | overall height 56.4mm |
| 8 | 2 | DistanceX | 96.1 | width 96.1mm at y≈-20.0mm [unverified span] |
| 9 | 2 | DistanceX | 95.3 | width 95.3mm at y≈-12.0mm [unverified span] |
| 10 | 2 | DistanceX | 15.5 | hole pattern width 15.5mm (4 x Ø2.5, from model) |
| 11 | 2 | DistanceY | 25.5 | hole pattern height 25.5mm (4 x Ø2.5, from model) |
| 12 | 3 | DistanceX | 56.4 | overall width 56.4mm |
| 13 | 3 | DistanceY | 68.5 | overall height 68.5mm |
| 14 | 3 | Diameter | 5.0 | 4x Ø5.0mm |
| 15 | 3 | Diameter | 5.6 | 5x Ø5.6mm |
| 16 | 3 | Diameter | 6.0 | Ø6.0mm |
| 17 | 3 | Distance | 66.7 | bolt circle Ø66.7mm (4 x Ø5 holes) |
| 18 | 3 | DistanceX | 50.1 | hole pattern width 50.1mm (8 x Ø3.2, from model) |
| 19 | 3 | DistanceY | 50.1 | hole pattern height 50.1mm (8 x Ø3.2, from model) |
| 20 | 3 | DistanceX | 47.1 | hole pattern width 47.1mm (4 x Ø5, from model) |
| 21 | 3 | DistanceY | 47.1 | hole pattern height 47.1mm (4 x Ø5, from model) |
| 22 | 5 | DistanceY | 68.5 | overall height 68.5mm |
| 23 | 5 | Diameter | 3.2 | 3x Ø3.2mm |
| 24 | 5 | DistanceX | 50.1 | hole pattern width 50.1mm (8 x Ø3.2, from model) |
| 25 | 5 | DistanceY | 50.1 | hole pattern height 50.1mm (8 x Ø3.2, from model) |
| 26 | 5 | DistanceX | 47.1 | hole pattern width 47.1mm (4 x Ø5, from model) |
| 27 | 5 | DistanceY | 47.1 | hole pattern height 47.1mm (4 x Ø5, from model) |
| 28 | 6 | Diameter | 9.5 | Ø9.5mm |
| 29 | 6 | Diameter | 37.1 | Ø37.1mm |
| 30 | 6 | Diameter | 38.1 | Ø38.1mm |
| 31 | 6 | DistanceY | 6.4 | hole pitch 6.4mm (2 x Ø2, from model) |
| 32 | 6 | DistanceX | 21.0 | hole pitch 21.0mm (2 x Ø2, from model) |
| 33 | 6 | DistanceX | 15.0 | hole pattern width 15.0mm (4 x Ø2.5, from model) |
| 34 | 7 | Diameter | 9.5 | Ø9.5mm |
| 35 | 7 | Radius | 4.0 | 4x R4.0mm |
| 36 | 7 | Radius | 9.0 | 4x R9.0mm |
| 37 | 7 | Radius | 16.0 | 4x R16.0mm |
| 38 | 7 | Angle | 82.4 | 2x angle 82.4 deg |
| 39 | 7 | DistanceY | 6.4 | hole pitch 6.4mm (2 x Ø2, from model) |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
