Sheet 1
OrthographicThis sheet includes 105 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 105 geometry edges from the CAD projection pipeline.
This sheet includes 70 geometry edges from the CAD projection pipeline.
This sheet includes 92 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
This sheet includes 68 geometry edges from the CAD projection pipeline.
Magnifies the wheel hub and bolt pattern, providing a clear view of the mounting details.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Light Aircraft Nose Landing Gear
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 1.0 | standard_view |
| 2 | Assembly - Top View | 1.0 | standard_view |
| 3 | Assembly - Right View | 1.0 | standard_view |
| 4 | Assembly - Isometric View | 0.5 | standard_view |
| 5 | Section A-A | 1.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.15 | A | B | C | low | bolt/hole pattern × 21 (position) |
| profile_of_a_surface | 0.4 | A | B | C | medium | 1164 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| profile_of_a_surface | 0.4 | A | B | C | medium | largest surface (103 mm) reached by no other frame — profile locates it to the datum frame instead of leaving it to the general tolerance note |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 2 | — | value drifted: asked 46, measured 45.515 |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.2 | high | ||
| perpendicularity | 0.2 | A | high | |
| position | 0.15 | diameter | A | B | C | low |
| profile_of_a_surface | 0.4 | A | B | C | medium | |
| profile_of_a_surface | 0.4 | A | B | C | medium |
All 29 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceY | 119.3 | overall height 119.3mm |
| 2 | 1 | Diameter | 90.0 | Ø90.0mm |
| 3 | 1 | DistanceX | 45.5 | hole pitch 45.5mm (horizontal, Ø1.2) |
| 4 | 1 | Radius | 2.7 | 4x R2.7mm |
| 5 | 1 | Radius | 3.0 | 2x R3.0mm |
| 6 | 1 | Radius | 45.0 | 2x R45.0mm |
| 7 | 1 | Angle | 86.5 | 4x angle 86.5 deg |
| 8 | 1 | DistanceY | 90.0 | hole pitch 90.0mm (2 x Ø1.2, from model) |
| 9 | 2 | DistanceY | 571.1 | overall height 571.1mm |
| 10 | 2 | Diameter | 8.0 | 4x Ø8.0mm |
| 11 | 2 | Angle | 54.5 | 2x angle 54.5 deg |
| 12 | 2 | Distance | 231.7 | hole pitch 231.7mm (2 x Ø18, from model) |
| 13 | 2 | DistanceX | 47.9 | hole pattern width 47.9mm (4 x Ø5, from model) |
| 14 | 2 | DistanceY | 23.0 | hole pattern height 23.0mm (4 x Ø5, from model) |
| 15 | 3 | DistanceX | 571.4 | overall width 571.4mm |
| 16 | 3 | DistanceY | 119.3 | overall height 119.3mm |
| 17 | 3 | Radius | 11.0 | 3x R11.0mm |
| 18 | 3 | DistanceX | 246.9 | width 246.9mm at y≈-17.142899999999997mm [unverified span] |
| 19 | 3 | DistanceX | 202.8 | width 202.8mm at y≈-42.85724999999999mm [unverified span] |
| 20 | 3 | DistanceY | 33.0 | hole pitch 33.0mm (2 x Ø5, from model) |
| 21 | 3 | DistanceY | 90.0 | hole pitch 90.0mm (2 x Ø5, from model) |
| 22 | 6 | Diameter | 1.2 | 2x Ø1.2mm |
| 23 | 7 | Diameter | 18.0 | 2x Ø18.0mm |
| 24 | 7 | Diameter | 23.9 | Ø23.9mm |
| 25 | 7 | DistanceX | 23.7 | hole pitch 23.7mm (horizontal, Ø3) |
| 26 | 7 | Radius | 12.0 | 2x R12.0mm |
| 27 | 7 | Radius | 13.5 | R13.5mm |
| 28 | 7 | Angle | 39.0 | angle 39.0 deg |
| 29 | 7 | Angle | 77.1 | angle 77.1 deg |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
