Sheet 1
OrthographicThis sheet includes 94 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 94 geometry edges from the CAD projection pipeline.
This sheet includes 108 geometry edges from the CAD projection pipeline.
This sheet includes 113 geometry edges from the CAD projection pipeline.
This sheet includes 96 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the side-mounted mechanism and shaft, highlighting the connection details and alignment.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Linear Actuator ITO40-700
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 0.5 | standard_view |
| 2 | Assembly - Top View | 10.0 | standard_view |
| 3 | Assembly - Left View | 0.5 | standard_view |
| 4 | Assembly - Isometric View | 0.5 | standard_view |
| 5 | Section A-A | 0.5 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.2 | A | B | C | medium | bolt/hole pattern × 8 (position) |
| profile_of_a_surface | 0.4 | A | B | C | medium | 841 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 3 | Diameter | 5.7 | 2x Ø5.7mm | overlaps prior label (tried 10 position(s)) |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.2 | high | ||
| perpendicularity | 0.2 | A | high | |
| position | 0.2 | diameter | A | B | C | medium |
| profile_of_a_surface | 0.4 | A | B | C | medium |
All 32 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceY | 987.0 | overall height 987.0mm |
| 2 | 1 | Diameter | 2.8 | 3x Ø2.8mm |
| 3 | 1 | Diameter | 4.6 | 3x Ø4.6mm |
| 4 | 1 | DistanceY | 713.6 | hole pitch 713.6mm (vertical, Ø2.8) |
| 5 | 1 | Radius | 3.0 | 4x R3.0mm |
| 6 | 1 | DistanceY | 95.0 | hole pitch 95.0mm (2 x Ø4.2, from model) |
| 7 | 2 | DistanceX | 61.5 | overall width 61.5mm |
| 8 | 2 | DistanceY | 53.0 | overall height 53.0mm |
| 9 | 2 | Diameter | 7.0 | 4x Ø7.0mm |
| 10 | 2 | DistanceX | 25.0 | hole pitch 25.0mm (horizontal, Ø5.5) |
| 11 | 2 | Distance | 49.5 | bolt circle Ø49.5mm (4 x Ø7 holes) |
| 12 | 2 | Radius | 1.5 | 2x R1.5mm |
| 13 | 2 | Radius | 3.0 | 8x R3.0mm |
| 14 | 2 | DistanceX | 35.0 | hole pattern width 35.0mm (4 x Ø3.2, from model) |
| 15 | 2 | DistanceY | 35.0 | hole pattern height 35.0mm (4 x Ø3.2, from model) |
| 16 | 3 | DistanceY | 987.0 | overall height 987.0mm |
| 17 | 3 | Diameter | 3.0 | 2x Ø3.0mm |
| 18 | 3 | Diameter | 5.3 | 3x Ø5.3mm |
| 19 | 3 | DistanceY | 24.0 | hole pitch 24.0mm (vertical, Ø2.3) |
| 20 | 3 | DistanceY | 713.6 | hole pitch 713.6mm (vertical, Ø5.3) |
| 21 | 3 | Radius | 1.0 | 2x R1.0mm |
| 22 | 3 | Radius | 2.0 | 4x R2.0mm |
| 23 | 5 | DistanceX | 53.0 | overall width 53.0mm |
| 24 | 5 | DistanceY | 987.0 | overall height 987.0mm |
| 25 | 5 | DistanceY | 862.0 | height 862.0mm at x≈0.0mm [unverified span] |
| 26 | 5 | DistanceY | 132.0 | height 132.0mm at x≈-29.61mm [unverified span] |
| 27 | 5 | DistanceX | 32.0 | hole pattern width 32.0mm (4 x Ø3.3, from model) |
| 28 | 5 | DistanceY | 32.0 | hole pattern height 32.0mm (4 x Ø3.3, from model) |
| 29 | 7 | Diameter | 3.3 | 4x Ø3.3mm |
| 30 | 7 | Diameter | 11.0 | Ø11.0mm |
| 31 | 7 | Diameter | 37.0 | Ø37.0mm |
| 32 | 7 | Distance | 45.3 | bolt circle Ø45.3mm (4 x Ø3.3 holes) |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
