Sheet 1
OrthographicThis sheet includes 101 geometry edges from the CAD projection pipeline.
AI Drawing Analysis
The cards below explain how the generated drawing outputs and assets connect to the final technical sheets.
This sheet includes 101 geometry edges from the CAD projection pipeline.
This sheet includes 106 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
This sheet includes 99 geometry edges from the CAD projection pipeline.
This sheet includes 99 geometry edges from the CAD projection pipeline.
This sheet includes 105 geometry edges from the CAD projection pipeline.
Sheet 5. Geometry is derived from the 3D model projection for this drawing set.
Magnifies the clamp mechanism, highlighting the threaded rod and the connection point for securing the casing.
Downloads
Each sheet available in PDF, SVG, and DXF. Click a format badge to download.
Drawing report
Cover summary and review report for this versioned drawing set.
Manual Sausage Stuffer
| Sheet | View | Scale | Content |
|---|---|---|---|
| 1 | Assembly - Front View | 1.0 | standard_view |
| 2 | Assembly - Top View | 0.5 | standard_view |
| 3 | Assembly - Left View | 0.97 | standard_view |
| 4 | Assembly - Isometric View | 0.5 | standard_view |
| 5 | Section A-A | 1.0 | section_view |
| 6 | Detail B | 2.0 | detail_view |
Generated automatically and intended for review before use. A companion review report lists what needs checking.
This drawing is generated automatically and is a first draft. The items below need a human decision.
| Characteristic | Tol | Datums | Confidence | Reason |
|---|---|---|---|---|
| position | 0.1 | A | B | C | low | bolt/hole pattern × 9 (position) |
| profile_of_a_surface | 0.4 | A | B | C | medium | 1137 face(s) have no analytic form — profile is the only control that applies to a sculpted surface |
| Sheet | Type | Value | Description | Reason |
|---|---|---|---|---|
| 1 | Radius | 5.0 | 4x R5.0mm | Radius ref Edge290 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 6 | Radius | 0.5 | 10x R0.5mm | Radius ref Edge256 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 6 | Radius | 2.5 | 2x R2.5mm | Radius ref Edge379 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 7 | Radius | 10.0 | 2x R10.0mm | Radius ref Edge317 is Line; no nearby Circle/Arc (a substitute further away is another hole) |
| 7 | Diameter | 15.6 | Ø15.6mm | outside page band (tried 20 position(s)) |
| 7 | Radius | 19.3 | 2x R19.3mm | outside page band (tried 20 position(s)) |
| 8 | Radius | 2.1 | 2x R2.1mm | refs off printable area |
| Characteristic | Tol | Zone | Datums | Confidence |
|---|---|---|---|---|
| flatness | 0.2 | high | ||
| perpendicularity | 0.2 | A | high | |
| position | 0.1 | diameter | A | B | C | low |
| profile_of_a_surface | 0.4 | A | B | C | medium |
All 33 dimension(s) drawn.
| # | Sheet | Type | Value | Description |
|---|---|---|---|---|
| 1 | 1 | DistanceX | 165.2 | overall width 165.2mm |
| 2 | 1 | DistanceY | 397.0 | overall height 397.0mm |
| 3 | 1 | Radius | 1.0 | 18x R1.0mm |
| 4 | 1 | DistanceX | 158.0 | hole pattern width 158.0mm (4 x Ø1.2, from model) |
| 5 | 1 | DistanceY | 21.4 | hole pattern height 21.4mm (4 x Ø1.2, from model) |
| 6 | 1 | DistanceX | 110.0 | hole pitch 110.0mm (2 x Ø6, from model) |
| 7 | 1 | DistanceX | 47.0 | hole pitch 47.0mm (2 x Ø6.5, from model) |
| 8 | 3 | DistanceX | 965.7 | overall width 965.7mm |
| 9 | 3 | DistanceY | 397.0 | overall height 397.0mm |
| 10 | 3 | Diameter | 4.0 | Ø4.0mm |
| 11 | 3 | Radius | 0.5 | 8x R0.5mm |
| 12 | 3 | Radius | 1.4 | 4x R1.4mm |
| 13 | 3 | Radius | 3.0 | 17x R3.0mm |
| 14 | 3 | Radius | 10.0 | 2x R10.0mm |
| 15 | 5 | DistanceX | 965.7 | overall width 965.7mm |
| 16 | 5 | Diameter | 6.0 | Ø6.0mm |
| 17 | 5 | Radius | 0.5 | 4x R0.5mm |
| 18 | 5 | Radius | 1.0 | 14x R1.0mm |
| 19 | 5 | Radius | 5.0 | 4x R5.0mm |
| 20 | 5 | DistanceX | 654.8 | width 654.8mm at y≈-43.45722mm [unverified span] |
| 21 | 5 | DistanceX | 648.8 | width 648.8mm at y≈-86.91444mm [unverified span] |
| 22 | 5 | DistanceX | 5.0 | hole pattern width 5.0mm (3 x Ø2, from model) |
| 23 | 5 | DistanceY | 7.5 | hole pattern height 7.5mm (3 x Ø2, from model) |
| 24 | 6 | Radius | 0.6 | 4x R0.6mm |
| 25 | 6 | Radius | 2.3 | 2x R2.3mm |
| 26 | 7 | Diameter | 16.0 | Ø16.0mm |
| 27 | 7 | Radius | 3.0 | 2x R3.0mm |
| 28 | 7 | Radius | 19.5 | 3x R19.5mm |
| 29 | 8 | Radius | 0.9 | 2x R0.9mm |
| 30 | 8 | Radius | 2.5 | 2x R2.5mm |
| 31 | 8 | Radius | 3.1 | 2x R3.1mm |
| 32 | 8 | Radius | 5.0 | 6x R5.0mm |
| 33 | 8 | Radius | 26.0 | 2x R26.0mm |
AI Transparency
These drawings were generated from the source 3D CAD geometry. The system analysed the model, selected relevant views, planned section cuts and generated drawing sheets in PDF, SVG and DXF formats.
These are 2D engineering drawings, not 3D files. Dimensions are extracted from the 3D geometry and should be verified against the source model before use in manufacturing.
Run Metadata
Explore Marathon OS
Jump to the source 3D model, generate your own drawings, or browse tools and libraries.
Open the original 3D CAD model used to generate this 2D drawing set. Review the source geometry before downloading or using the technical drawings.
Open 3D CAD model →Everything you need to design faster, smarter, and with more impact.
Everything you need to design faster, smarter, and with more impact.
